ページ1に含まれる内容の要旨
DOCUMENT SCANNER
INSTRUCTIONS
CANON ELECTRONICS INC.
1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN
CANON U.S.A. INC.
ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A.
CANON CANADA INC.
6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA
CANON EUROPA N.V.
BOVENKERKERWEG 59-61, 1185XB AMSTELVEEN, THE NETHERLANDS
CANON LATIN AMERICA, INC.
6505, BLUE LAGOON DRIVE, SUITE 325 MIAMI, FLORIDA 33126 U.S.A.
CANON AUSTRALIA PTY. LTD.
1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTR
ページ2に含まれる内容の要旨
FCC REGULATIONS (For 120V models) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
ページ3に含まれる内容の要旨
Introduction Thank you for purchasing the Canon Document Scanner DR-5060F. The DR-5060F high-speed document scanner has a built-in function for backing- up data to microfilm. In order to fully understand and effectively use the functions of this scanner, be sure to read this manual before use. Also, after you have read this manual, be sure to store this manual in a safe place. Caution Take note of the following when using the scanner to make copies: Reproducing money, other forms of currency o
ページ4に含まれる内容の要旨
CONVENTIONS This manual uses the following symbols and indications. Before you start reading this manual, read the following and familiarize yourself with their meanings. WARNING Read carefully to avoid death or serious injury. CAUTION Read carefully to avoid serious injury or damage to the equipment or loss of valuable data. NOTE Read carefully to avoid damage to the equipment. MEMO Read carefully, memos indicate where you will find useful information in this manual. This Unit This manu
ページ5に含まれる内容の要旨
Contents Introduction ........................................................................................................................ 1 CONVENTIONS........................................................................................................... 2 Safety Precautions ............................................................................................................. 5 Daily maintenance .....................................................................................
ページ6に含まれる内容の要旨
Chapter 4 Troubleshooting.................................................................... 59 When the Scanner is Not Recognized............................................................................ 60 Removing Paper Jams ..................................................................................................... 61 Paper Jam in the Paper Eject Section........................................................................ 61 Paper Jam in the Feed Section ......................
ページ7に含まれる内容の要旨
Safety Precautions Daily maintenance When you are working around the unit, follow these precautions to avoid the hazards of fire and electrical shock: WARNING Never install and operate the unit near flammable substances such as alcohol, benzene, paint thinner, or any other type of volatile solution. Never damage or modify the power cord, place heavy objects on the power cord, or pull or unnecessarily bend the power cord. Always make sure that your hands are dry when you are handling the
ページ8に含まれる内容の要旨
CAUTION The scanner weighs about 48 kg (105.8 lb.). To avoid damage to the unit, never place the unit on an unstable or vibrating surface. The unit may tip or fall over, and cause an injury. To avoid overheating and causing a fire, never block the air vents on the rear of the scanner. Keep all liquids, beverages, or any type of liquid, and clips, staples, necklaces or other metal objects away from the unit. If you accidentally spill liquid or drop a metal object into the unit, turn the u
ページ9に含まれる内容の要旨
About the Installation Location More than 100 mm (39.0 in.) More than More than 100 mm (39.0 in.) 100 mm (39.0 in.) 771 mm (30.0 in.) (with document tray extension, extension wire closed) 936 mm (36.5 in.) (with document tray extension, extension wire open) More than 740 mm (28.8 in.) For operation, maintenance and ventilation, make sure that there is enough space around the scanner as shown in the illustration above. Do not place the unit in the following places. Doing so might cause m
ページ10に含まれる内容の要旨
About the Power Supply WARNING Be sure to connect to a AC 220-240V (50/60 Hz)/AC 120V (60 Hz) power supply. Ensure that the scanner is connected to an independent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cable, pay attention to the total amperage of the cable. Be sure to connect the ground cable before using the scanner. Also, never connect the ground cable to gas pipes or water pipes. If you are unsure of anything relatin
ページ11に含まれる内容の要旨
About DR-5060F 1 Chapter 1 About DR-5060F This chapter describes the features of the scanner, what’s in the box, and the names and functions of parts on the scanner and the camera unit. Features of DR-5060F ............................... 10 Packaging: What’s in the Box? ................. 11 Names and Functions of Parts................. 12 About the Camera Unit ............................. 18 9
ページ12に含まれる内容の要旨
Features of DR-5060F The DR-5060F scanner not only processes large volumes of documents at high speed, but also is provided with a function for backing-up data to microfilm. Here is a summary of the outstanding features of the DR-5060F. High-speed scanning Small documents such as business cards and check-size documents through to A3/(11 x 17 in.)-size documents can be scanned at high speed. The maximum scan speed is 50 sheets per minute (A4/(11.5 x 16.3 in.)-size portrait in simplex and duplex
ページ13に含まれる内容の要旨
About DR-5060F Backup Space E FILM F Count Only New File Scanner Feeding Opt ion A Manual Aut o Semi-Aut o Packaging: What’s in the Box? 1 Make sure that you have everything. Check every item you have removed from the box. If any items are missing or damaged, contact your place of purchase. Setup CD-ROM DR-5060F DR-5060F Instructions (this manual) Scanning Utility 5060 Instructions ISIS/TWAIN Driver Instructions Removable tray Document eject Power cord support plate (The power cord varies accord
ページ14に含まれる内容の要旨
Backup Space E FILM F Count Only New File Scanner Feeding Option A Manual Auto Semi-Auto Names and Functions of Parts This section describes the names and functions of each part. Before you connect the DR-5060F, take a few minutes to familiarize yourself with the main parts. Front view Document eject tray Document eject tray extension/stopper After a document is Select the document eject tray scanned, it is ejected onto extension matched to the size of this tray. document you are scanning. (Se
ページ15に含まれる内容の要旨
About DR-5060F Backup Space E FILM F Count Only New File Scanner Feeding Option A Manual Auto Semi-Auto Inside (with upper unit open) 1 Counter This counter counts the total number of fed document sheets. Feed unit open/close button Feed unit Intermediate unit Paper feed adjustment lever Slide this lever to adjust paper feed according to the condition of the paper surface. (See “Paper Feed Adjustment” P. 36) Rear view Ground terminal Connect the ground terminal provided to this terminal. Air
ページ16に含まれる内容の要旨
Operation panel 12 3 4 5 6 (1) Function keys (2) Remaining film Backup Space/Trailer indicator (3) Backup key EF FILM (4) Space/Trailer key (5) Count Only key Count Only (6) Clear/Stop key New File Scanner (7) New File key Feeding Option Manual A Auto (8) Start key Semi-Auto (9) Feeding Option key (10) Brightness key (11) Indicator lamps (12) Counter display (1) Function keys The following functions and settings can be registered to function keys so that they can be called up later by one-touc
ページ17に含まれる内容の要旨
About DR-5060F (3) Backup key 1 This key displays and changes the scanner operation mode: Lit (Backup mode): In this mode, scanned images are being photographed on microfilm while they are being transferred to computer. Out (Scanner Only mode): In this mode, scanned images are not photographed to microfilm. Blinking (Filmer Only mode): In this mode, scanned images are not transferred to computer, and are only photographed to microfilm. The default setting for this scanner is the Backup mode. Pre
ページ18に含まれる内容の要旨
(8) Start key When the Start key is lit green, pressing this key starts feeding of originals placed on the document tray. Key functions are disabled when this key is lit red. When this key is blinking green, this indicates that manual thickness adjustment is in progress. To start feeding, end this adjustment. (See “Manual Thickness Adjustment” P. 53) (9) Feeding Option key Select the document feed mode. (See “Selecting the Feeding Option” P. 45) Each press of the Feeding Option key changes the l
ページ19に含まれる内容の要旨
About DR-5060F Removable tray 1 This tray can be installed on the document eject tray to prevent short-length documents such as checks and bank notes from flying out of the tray when they are ejected form the scanner. (See “Removable tray” P. 36) Document eject support plate Install this plate when scanning large-size (e.g. A3/11 x 17 in.) or thin documents. This plate prevents such documents from becoming caught on the document eject tray. Function key labels Function key labels: Write th
ページ20に含まれる内容の要旨
About the Camera Unit Two camera units are provided for this unit: one with a 1/24 magnification lens and one with a 1/57 magnification lens. The image photographed to film varies according to which of these camera units is used. For details, contact your place of purchase or a Canon service department. The ID No. of the camera unit can be set within the range 1 to 15. For details on setting the ID No., contact your place of purchase or a Canon service department. When the 1/24 camera unit (
