ページ1に含まれる内容の要旨
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
Quick Start Guide
® ®
Quick Start Guide
As an ENERGY STAR Partner, Canon Inc. has determined that this model meets the ENERGY STAR Program
for energy efficiency.
®
Please read this guide before operating this scanner. After you finish reading this guide, store it
The International
ページ2に含まれる内容の要旨
Specifications Specifications FCC Notice (U.S.A. Only) CanoScan 8600F For 120V, 60Hz model Scanner Type Flatbed Model Number : K10294 Scanning Element CCD 6-line color This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Light Source Cold cathode fluorescent lamp This device may not cause harmful interference, and (2) this device must accept any interference received, including *1 interference that may cause undesired operation. Optical
ページ3に含まれる内容の要旨
Package Contents Package Contents Scanner and Accessories AC Adapter Scanner USB Cable Film Guide Film Guides (for 120 format film) (for 35mm film strip/slide) Documentation • Quick Start Guide (this document) • Additional Documents CanoScan Setup Utility CD-ROM • Software Programs - ScanGear (scanner driver) - CanoScan Toolbox - ArcSoft PhotoStudio - Presto! PageManager (Windows only) - ScanSoft OmniPage SE (not supported for Windows 98 First Edition) - Adobe RGB (1998) (Windows only) • On-scr
ページ4に含まれる内容の要旨
Installing the Software Installing the Software • Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the Found New Hardware Wizard appears, click [Cancel]. • Quit all running applications before installation, including anti-virus software. • For Windows 2000/XP, log in as an administrator to install the software. 1 Place the CanoScan Setup Utility CD-ROM in the drive. CanoScan Setup Utility program starts. • For Macintosh: Double-click the [
ページ5に含まれる内容の要旨
Preparing the Scanner Preparing the Scanner Unlocking the Scanner 1 Peel the seals off the scanner. 2 Slide the lock switch on the bottom of the scanner toward the unlock mark ( ). • Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock. • Handle the scanner with both hands. Be careful not to drop the scanner. • Always lock the scanner when carrying or transporting it. • When locking the scanner, do not lift up the back and tilt the front (scanner button location)
ページ6に含まれる内容の要旨
Try Scanning Try Scanning This section explains the basic scanning procedures using the image editing program, ArcSoft PhotoStudio, and the scanner driver, ScanGear. 1 Place a document on the document glass and close the document cover. Top Bottom Alignment Mark 2 Start ArcSoft PhotoStudio. For Windows: Select [start] - [(All) Programs] - [ArcSoft PhotoStudio 5.5], then click [PhotoStudio 5.5]. For Macintosh: Open [Applications] - [PhotoStudio] folders, then double-click the [PhotoStudio]
ページ7に含まれる内容の要旨
Using the Scanner Buttons Using the Scanner Buttons Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press of a button. Simply place your document on the scanner, and then press the scanner button for the required function. For more information, see the Scanning Guide. PDF Buttons COPY Button PDF buttons allow you to easily create PDF Prints (copies) the scanned image with a files according to your needs. Note that these printer. buttons
ページ8に含まれる内容の要旨
Scanning Film Scanning Film This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below when scanning film. Make sure that the FAU Cable is connected to the FAU connector on the back of the scanner. 1 Remove the protective sheet from the 1 document cover. Press and hold the lever at the top of the protective 2 sheet while you a pull the sheet outward and b detach it. • Store the protective sheet in a safe place so that it will not get bent or broken.
ページ9に含まれる内容の要旨
Scanning Film 35mm Slides Align the Film Guide’s tab with the FILM symbol on the document glass of the scanner. Place a slide or slides face down (correctly viewed from below) in the Film Guide as shown in the diagram to the right. 120 Format Films Open the film holder on the film guide, place the film face down and close the film holder. Align the Film Guide’s tab with the FILM symbol on the document glass of the scanner. • Leave a gap of 5 mm or greater between film strips when placi
ページ10に含まれる内容の要旨
Scanning Film 4 Start ArcSoft PhotoStudio, then start ScanGear. Follow the steps 2 to 4 in "Try Scanning" on page 4. 5 Select [Negative Film (Color)] or [Positive Film (Color)] in [Select Source] to match the type of film you are scanning, then click [Preview]. 6 Place a check mark beside the number(s) of the frame(s) you want to scan. Perform image corrections as needed. 7 Click [Scan] to start scanning. Do not move the scanner while it is operating. 8 When prompted to close ScanGear, cl
ページ11に含まれる内容の要旨
Specifications Specifications FCC Notice (U.S.A. Only) CanoScan 8600F For 120V, 60Hz model Scanner Type Flatbed Model Number : K10294 Scanning Element CCD 6-line color This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Light Source Cold cathode fluorescent lamp This device may not cause harmful interference, and (2) this device must accept any interference received, including *1 interference that may cause undesired operation. Optical
ページ12に含まれる内容の要旨
The socket-outlet shall be installed near the equipment and shall be easily accessible. Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. Quick Start Guide ® ® Quick Start Guide As an ENERGY STAR Partner, Canon Inc. has determined that this model meets the ENERGY STAR Program for energy efficiency. ® Please read this guide before operating this scanner. After you finish reading this guide, store it The International
