ページ1に含まれる内容の要旨
Installation Guide
♦ Please read this manual before operating this scanner.
ページ2に含まれる内容の要旨
2. BACK-UP COPY: You may make one copy of the THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR READ CAREFULLY BEFORE OPENING SOFTWARE solely for a back-up purpose or copy the EXCLUSIVE REMEDY IN CONNECTION WITH THE THE SEALED DISK PACKAGE SOFTWARE onto the permanent storage device (e.g. a hard SOFTWARE AND ACCOMPANYING DOCUMENTATION. disk) of your computer and retain the original for a back-up CANON SOFTWARE LICENSE 5. TERM: This Agreement is effective upon opening the purpose. Except as exp
ページ3に含まれる内容の要旨
® ■ FCC REGULATIONS (For 120V model) ■ International ENERGY STAR Office Equipment Program ® Check Reader, Model M111101/M111102 As an ENERGY STAR Partner, CANON ELECTRONICS INC. has ® This device complies with Part 15 of the FCC Rules. Operation is subject to the determined that this machine meets the ENERGY STAR Program following two conditions: guidelines for energy efficiency. ® (1) This device may not cause harmful interference, and (2) this device must accept The International ENERGY STAR
ページ4に含まれる内容の要旨
■ Trademarks � Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. � imageFORMULA is a trademark of CANON ELECTRONICS INC. � Microsoft, Windows, Windows XP, Windows Vista, and Windows 7 are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. � Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. � Adobe
ページ5に含まれる内容の要旨
INTRODUCTION Thank you for purchasing the Canon Check Reader CR-50/80. Please read this manual thoroughly before using the machine in order Symbols Used in This Manual to familiarize yourself with its capabilities, and to make the most of its The following symbols are used in this manual to explain procedures, many functions. restrictions, handling precautions, and instructions that should be observed for safety. Manuals for the CR-50/80 WARNING The following manuals are provided with the CR-
ページ6に含まれる内容の要旨
Table of Contents INTRODUCTION................................................................... 5 Manuals for the CR-50/80 ........................................................... 5 Symbols Used in This Manual..................................................... 5 Important Safety Instructions............................................. 7 Handling ...................................................................................... 7 Disposal ..............................................
ページ7に含まれる内容の要旨
Important Safety Instructions CAUTION Handling ■ To avoid damage to the scanner, never place the scanner on an unstable or vibrating surface. The scanner may tip or fall over, causing injury. WARNING ■ Keep all liquids, beverages, or any type of liquid, and clips, staples, ■ Never install and operate the scanner near flammable substances, necklaces, or other metal objects away from the scanner. If you such as alcohol, paint thinner, benzene, or any other type of volatile accidentally spill
ページ8に含まれる内容の要旨
Disposal Power Supply When disposing of this scanner, be sure to follow all local ordinances ● Connect only to a power outlet of the rated voltage and power and laws or consult with the retailer who sold you the scanner. supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). ● Make sure that the scanner is connected to an independent power Installation Location outlet. Do not plug the scanner into an outlet shared with another For operation, maintenance, and
ページ9に含まれる内容の要旨
Moving the Scanner When you move the CR-50/80, hold it firmly with both hands and carry it carefully. Do not hold the scanner by the Eject Stopper. The scanner weighs approximately 2 kg (4.4 lb). WARNING When moving the scanner, be sure to turn OFF the power and remove any cables. If the cables are not removed before moving the scanner, you may damage the plugs or connector by forcibly pulling them out. 9
ページ10に含まれる内容の要旨
Packaging: What Is in the Box? Make sure that you have everything shown below. Check every item you have removed from the box. If any items are missing, contact your local authorized Canon dealer. Setup Disc *1 Power Cord CR-50/80 Marking Labels for Thickness Adjustment Dial USB Cable *2 *2 AC Adapter User Registration Card Warranty Card Installation Guide Operation & Maintenance Guide *1 The power cord varies, according to the country of purchase. *2 For the United States and Canada only. N
ページ11に含まれる内容の要旨
Preparation Before Use This chapter describes how to prepare the scanner to scan IMPORTANT documents. • To have the device drivers installed automatically when the computer recognizes the CR-50/80, the software needs to be Setting Up the Scanner installed before the CR-50/80 is connected to the computer. � If you connect the computer and turn ON the CR-50/80 before Perform the following steps to set up the CR-50/80. Refer to the installing the software, the following wizard screen appears.
ページ12に含まれる内容の要旨
Checking Your Operating Environment Installing the Scanning Utility The following computer system requirements are recommended for Follow the instructions below to install the Scanning Utility and the using the CR-50/80. dedicated driver. Operating Systems: NOTE � Microsoft Windows XP (32bit) SP3 or later The dedicated scanner driver is installed after the Scanning Utility � Microsoft Windows XP (64bit) SP2 or later has been installed. � Microsoft Windows Vista (32/64bit) SP1 or later � Micros
ページ13に含まれる内容の要旨
4 Click [Accessories], and then click [Run]. Connecting the Scanner to a Computer The only way to connect the scanner to your computer is with a USB cable. IMPORTANT � Be sure to use the USB cable bundled with the scanner or a Hi- Speed USB 2.0 compatible cable with the length less than 5 m. � When the application is running, do not turn the scanner OFF or unplug the interface cable. � Do not connect multiple CR-50/80 scanners to one computer. CAUTION � Do not turn OFF the scanner or remove th
ページ14に含まれる内容の要旨
Connecting the Power Cord Turning ON and OFF the Power Connect the power cord. Follow the procedures below to turn the scanner power ON and OFF. Make sure to use only the power cord provided with the scanner. Turning ON the Power 1 To turn ON the scanner, slide the Power Switch to the right. (ON) IMPORTANT • When you turn ON the power, the power LED lights and remains lit. � If the scanner does not work, there is a problem with the WARNING scanner. Turn OFF the power, and contact your local a
ページ15に含まれる内容の要旨
Turning OFF the Power 3 Windows recognizes the CR-50/80 as new hardware, and installation starts automatically. 1 Turn OFF your computer. 2 To turn OFF the scanner, slide the Power Switch to the left. (Windows 7) NOTE The CR-50/80 will be registered as “CANON CR-50 USB” or “CANON CR-80 USB” in the Imaging Device directory. (OFF) CAUTION � Wait at least 10 seconds before turning the scanner back ON. � For your safety, disconnect the power plug from the power outlet if you are not using the s
ページ16に含まれる内容の要旨
Preparing the Ink Cartridge 1 Hook your finger around the open lever and open the Maintenance Cover. This section describes how to prepare the ink cartridge so that you can use the imprinter to print text on scanned documents. About the Ink Cartridge The ink cartridge is not included with the scanner. Purchase an ink cartridge separately, as shown below. Manufacturer : Hewlett Packard Ink Cartridge Blue : C6602B (Canon#3693A002) Ink Cartridge Red : C6602R (Canon#3693A003) Ink Cartridge Gree
ページ17に含まれる内容の要旨
IMPORTANT 5 Place the ink cartridge shown in the diagram below. Do not touch the ink cartridge contacts. This can cause a bad electrical contact and reduced print quality. 4 Grasp the tag and then peel off the tape covering the ink jet nozzle. CAUTION Do not touch the electrical contact on the carriage. Doing so may cause a malfunction. NOTE IMPORTANT Do not use more than one cartridge by rotation. If you do so, Do not touch the ink jet nozzle or contacts after peeling off the tag applicati
ページ18に含まれる内容の要旨
If the ink head drops back when installed, the two ink cartridge IMPORTANT pins will not fit into the holes on the carriage. Push back the ink Make sure that the ink cartridge lock lever locks the ink cartridge cartridge lock lever a in the direction of the arrow and reset the into the correct position. cartridge in the correct position b. Ink Cartridge Ink Cartridge If the cartridge does not Holes Pins load properly, see step 7. Ink Cartridge Lock Lever 8 Carefully replace the Imprinter C
ページ19に含まれる内容の要旨
Document Feeding and Scanning For details on the operations, refer to the Instructions (Electronic Manual) on p. 33 or the Operation & Maintenance Guide (Manual) on p. 6. 19
ページ20に含まれる内容の要旨
Index A Adjusting the Print Position.......................................................... 16 D Disposal......................................................................................... 8 H Handling ........................................................................................ 7 I Ink Cartridge................................................................................ 16 Installation Location....................................................................... 8 Inst
