ページ1に含まれる内容の要旨
User Manual
• Please read this manual before operating this
scanner.
� After you finish reading this manual, store it in a safe
place for future reference.
ページ2に含まれる内容の要旨
FCC REGULATIONS (For 120 V model) RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE Document Scanner, Model M111091 (For 120 V models) This device complies with Part 15 of the FCC Rules. Operation is Cet appareil numérique respecte les limites de bruits radioélectriques subject to the following two conditions: (1) This device may not cause applicables aux appareils numériques de Classe B prescrites dans la harmful interference, and (2) this device must accept any interference norme sur le matéri
ページ3に含まれる内容の要旨
Für EMVG Copyright Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Copyright 2011 by CANON ELECTRONICS INC. All rights reserved. Gewerbebereich sowie in Kleinbetrieben vorgesehen. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval Model Names system without the prior written permission of CANON The following name may be provided for t
ページ4に含まれる内容の要旨
Avant l’utilisation Vor dem Gebrauch Antes de la utilización Prima dell’uso Voor gebruik Please read first. Setup Guide STEP 1 Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. Scanner Feed Tray USB Cable Type A/Type B (Length: 1.8 m) AC Adapter/Power Cord Reference Guide Before Use (Connected length: 2.6 m) (Europe only) Setup Disc Warranty Card (U.S.A. and Canada only) � Items included in thi
ページ5に含まれる内容の要旨
Third-Party Software Setup Disc Contents The following software applications are also included on the supplied Install the following software necessary for using the scanner from the Setup Disc. For details on installing these applications, refer to the supplied Setup Disc. Readme.txt file. � CaptureOnTouch � eCopy PDF Pro Office This is a dedicated scanning application for this product. Nuance Communications PDF creation/editing software. � CapturePerfect 3.1 This is a scanning application f
ページ6に含まれる内容の要旨
STEP 2 Installing the Software � Scanning speeds are lower if your computer's standard USB System requirements interface is USB Full-Speed (equal to USB 1.1.) To use the scanner, your computer must satisfy the following system � The USB cable you are using should be the one originally included requirements. with the scanner. � If the CPU, memory, interface card, and other specifications do not Computer satisfy the installation requirements, the scanning speed may be CPU: Intel Core i7 2.8GH
ページ7に含まれる内容の要旨
Software Installation 2 Click [Typical Installation]. IMPORTANT � Install the software before connecting the scanner to the computer. � Log on to Windows as an Administrator. � Close all other applications before installing the software. 1 Insert the software setup disc into the DVD drive of the computer. The setup menu automatically starts up when you insert the disc into the drive. (If the menu does not start up, execute setup.exe from the disc.) About Installation of the Third-Party Softwa
ページ8に含まれる内容の要旨
4 Click [Next]. 6 Click [Install]. 7 When the driver installation is complete, click [Finish]. 5 Read the license agreement, and click [I accept the terms in the license agreement] and then [Next] if you agree to it. 8 Click [Next]. 8
ページ9に含まれる内容の要旨
9 Read the license agreement, and click [Yes] to accept it. 12 When CaptureOnTouch installation is complete, click [Finish]. 10 Click [Next]. 13 Click [Next]. 11 Specify whether to install the plug-in for SharePoint, and click [Next]. 9
ページ10に含まれる内容の要旨
14 Read the license agreement, and click [I accept the terms 16 When CapturePerfect installation is complete, click in the license agreement] and then [Next] if you agree to [Finish]. it. 17 Select the language you want to use, and click [Next]. 15 Click [Next]. 18 Click [Next]. 10
ページ11に含まれる内容の要旨
19 When the User Manual installation is complete, click [Finish]. 20 Click [Exit] to finish installing the software. 11
ページ12に含まれる内容の要旨
STEP 3 Connecting to a Computer Connect the scanner to the computer and the power supply. IMPORTANT � Do not connect the scanner to the computer before installing the software. � Before connecting the scanner to the computer, verify that the power of the scanner is OFF. If the power is ON, turn it OFF. USB cable (included with the scanner) AC adapter (included with the scanner) To the power outlet 12
ページ13に含まれる内容の要旨
STEP 4 Turning the Power ON The power of the scanner can be turned ON and OFF with the power When the scanner is properly connected to the computer, the button on the front of the scanner. (CaptureOnTouch) icon appears on the taskbar as follows. 1 Make sure that the scanner and computer are connected properly. If the taskbar icon appears as , the scanner is not properly connected to the computer. Check the status of the power switch and 2 Press the power button. USB cable. Turning Off the P
ページ14に含まれる内容の要旨
Introduction Thank you for purchasing the Canon imageFORMULA DR-M160 Document Scanner. Symbols Used in This Manual Please read the following manuals carefully and familiarize yourself The following symbols are used in this manual to explain procedures, with the functions of the scanner before use to ensure you sufficiently restrictions, handling precautions, and instructions that should be understand the functions and make the most of the scanner’s observed for safety. capabilities. After
ページ15に含まれる内容の要旨
Table of Contents Setup Guide ......................................................................... 4 Scanning with CapturePerfect .................................... 49 Scanning with CapturePerfect............................................... 49 Introduction ....................................................................... 14 Symbols Used in This Manual.................................................... 14 Setting the Scanner Driver .......................................... 51 Co
ページ16に含まれる内容の要旨
Before Using the Scanner Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the ● Avoid exposing the scanner to rapid changes in temperature. If the safety warnings and precautions described below. room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. The Installation Location following conditions are recommended for
ページ17に含まれる内容の要旨
● Never try to take the AC adapter apart or modify it in any way, as Moving the Scanner this is dangerous. ● Do not use flammable spray near the scanner. ● When moving the scanner, always hold it with both hands to avoid ● When cleaning the scanner, push the power button to turn it OFF dropping it. The scanner weighs approximately 3.2 kg (7.1 lb). and disconnect the power cord from the power supply. ● Make sure to disconnect the interface cable and AC adapter before ● Clean the scanner using
ページ18に含まれる内容の要旨
● When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord's internal wiring, resulting in a fire or electric shock. ● Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug, you will be unable to unplug it in an emergency. ● Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.) to spill into the scanner, as this
ページ19に含まれる内容の要旨
Features of the Scanner The main features of the DR-M160 document scanner are described ● Auto Resolution Detection below. When enabled in the CaptureOnTouch or scanner driver settings, ● Compact Design this function detects the content of documents and determines the The scanner has a compact size of 280 mm (11.02")(W) x 172 mm scanning resolution automatically. (6.77")(D) x 178 mm (7.01")(H) when the document feed is closed. ● Folio Scan ● Fast Document Feeding You can scan folded documents.
ページ20に含まれる内容の要旨
● Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again. ● Start Scanning from the Operating Panel You can start scanning by launching CaptureOnTouch with the operating panel buttons. By default, Job No.1 is assigned to Scan First, which allows you to easily scan a document by just following the instr
