ページ1に含まれる内容の要旨
ViviCam X014 Digital Camera
User Manual
© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
ページ2に含まれる内容の要旨
Contents Introduction .................................................................................................................................. 2 What‟s Included ............................................................................................................................ 2 Parts of the Camera ..................................................................................................................... 3 Initial Camera Setup .....................................
ページ3に含まれる内容の要旨
Introduction Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Note: Your camera needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. Please read this manual carefully first in order to get the most out of your digital camera. What’s Included 1. Digital Came
ページ4に含まれる内容の要旨
Parts of the Camera 1. Power Button 12. ViviLink / Down Button 2. Shutter Button 13. Microphone 3. LCD Screen 14. Flash Light 4. LED 15. USB Slot 5. Zoom Out 16. Tripod Socket 6. Zoom In 17. Digital Lens 7. MODE Button 18. Battery Compartment 8. SET Button 19. Memory Card Slot 9. Scene / Left Button 20. Macro Button 10. Flash / Up / Slideshow 21. Wrist Strap Connector 11. Delete / Right Button 22. Speaker 3
ページ5に含まれる内容の要旨
Initial Camera Setup Installing the Batteries Installing the Memory Card SD Memory card (up to 32GB) needed for normal use Turning On the Camera Using the Camera Selecting the modes Accessing the menu 4
ページ6に含まれる内容の要旨
When powering the camera ON for the first time the camera will take you through the initial camera setup. Powering the Camera ON 1) Make sure the batteries have been inserted properly into your digital camera. Use 3 x AAA (1.5v) batteries. Rechargeable batteries are not recommended for use. 2) Make sure an SD card has been properly inserted into your camera (until a click sound is heard). Note: After the camera is powered on, an SD icon will appear on the LCD display. If you do not s
ページ7に含まれる内容の要旨
Setting the ViviLink Default Option Once the Date and Time have been set, you will be asked to set the default ViviLink destination for photos and videos taken with your camera. The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying software application. 1) First you will be asked to choose the default ViviLink social network for Photos. Highlight the desired default social network and pr
ページ8に含まれる内容の要旨
Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the “Shutter” button. The picture will be automatically saved to your camera‟s memory card. To access the various menus
ページ9に含まれる内容の要旨
Camera Technical Specifications Image Sensor CMOS Sensor 10M (3648x2736), 8M (3264x2448), 7M HD (3648x2048), Image Resolution 5M (2592x1944), 3M (2048x1536), 2M HD (1920x1080), VGA ( 640x480 ) Video Resolution 640X480 pixels (30 fps), 320X240 pixels (30 fps) File Format JPEG/AVI Internal Memory 1 Test Photo Use Only External Memory SD Card (up to 32GB) LCD Display 1.8 Inch TFT with 180 degree Swivel Display Lens f=7mm F3.0 Zoom 4X Digital Zoom Exposure -3.0EV ~ +3.0EV White Balan
ページ10に含まれる内容の要旨
Computer System Requirements – Windows To be able to download photos and videos to your PC, you will need the following minimum configuration: Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7 512 MB RAM, with 100MB of free disk space 1024 x 768 Recommended screen resolution 16-bit color or higher display adaptor CD-ROM Drive QuickTime 6 or higher Microsoft Internet Explorer 7 or higher Windows Media Player 10 or higher
ページ11に含まれる内容の要旨
Using Your Digital Camera Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use. Powering the camera ON Press the Power button to turn your camera ON. The camera will be in Photo Capture mode to start. Powering the camera OFF While the camera is on, you can press the Power button again at any point to turn your camera OFF. You will see a “Goodbye”
ページ12に含まれる内容の要旨
To change the active camera mode, make sure the camera is powered ON and press the MODE button on the back of the camera. When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display When in Video Capture Mode, this icon will display on the top-left corner of the LCD display When in Playback Mode, this icon will display on the top-left corner of the LCD display Navigating the Menus Each camera mode has a set of menus specific to that mode.
ページ13に含まれる内容の要旨
Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camera. Taking a Picture 1) While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. 2) Click the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired. Note: The actual shape of these buttons may vary per camera model. 3) Click the Shutter button on the top of the camera to take the picture. 4) The picture wil
ページ14に含まれる内容の要旨
Photo Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons: Button Icon appearing and Action Left Scene Selection - Opens the Scene menu Flash Options - Toggles the Flash options appearing on the LCD Up Right Delete Last Photo – Allows you to delete the last photo taken Down ViviLink – Opens the ViviLink menu Hide/Show the LCD Icons The display of the icons on the LCD screen can be hidden or visible as d
ページ15に含まれる内容の要旨
conditions. Note: An initial flash appears to test your lighting conditions. If flash is needed, a second flash will appear upon taking the photo. The flash is enabled for each photo. Note: If you use this option in a well lit environment, your photo Forced On may be appear too bright/light (overexposed). Eliminates the red-eye effect in a photo caused by flash. Red Eye Macro Switch / Your camera contains a Macro Switch that allows you to manually enable or disable th
ページ16に含まれる内容の要旨
Photo Capture Mode Menus The following are the menus that appear in your camera‟s Photo Capture Mode: 15
ページ17に含まれる内容の要旨
Scene Menu The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll through the menu options. 4) Press the SET button to select the desired option. 5) A selected option icon will appear on the selected item. 6
ページ18に含まれる内容の要旨
Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll through the menu options. 4) Press the SET but
ページ19に含まれる内容の要旨
9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Anti-Shake Menu The Anti-Shake feature reduces image distortion that can be caused by movement of the camera while capturing the image. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to
ページ20に含まれる内容の要旨
Facing the camera - The face of the subject(s) you are photographing must be facing the camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears around the subject`s face. Face Detect will not work with a side shot of the subject`s head. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll th
