ページ1に含まれる内容の要旨
MODEL G0690/G0691
10" CABINET TABLE SAW
with RIVING KNIFE
OWNER'S MANUAL
Model G0690
Model G0691
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION ............................................... 2 SECTION 5: ACCESSORIES ......................... 46 SECTION 6: MAINTENANCE ......................... 49 SECTION 1: SAFETY ..................................... 10 SECTION 7: SERVICE ................................... 51 SECTION 2: CIRCUIT REQUIREMENTS ...... 15 SECTION 3: SETUP .....................
ページ4に含まれる内容の要旨
INTRODUCTION Manual Accuracy Functional Overview your machine may not exactly match the manual www.grizzly.com Contact Info
ページ5に含まれる内容の要旨
Identification Figure 1.
ページ6に含まれる内容の要旨
MACHINE DATA SHEET MODEL G0690 10" TABLE SAW w/RIVING KNIFE Product Dimensions: Shipping Dimensions: Carton #1 Carton #2 Carton #3 Carton #4 Electrical:
ページ7に含まれる内容の要旨
Motors: Main Main Specifications: Blade Information Cutting Capacities Table Information Fence Information Miter Gauge Information
ページ8に含まれる内容の要旨
Construction Other Related Information: Other Specifications: Features:
ページ9に含まれる内容の要旨
MACHINE DATA SHEET MODEL G0691 10" TABLE SAW w/RIVING KNIFE & EXTENSION TABLE Product Dimensions: Shipping Dimensions: Carton #1 Carton #2 Carton #3 Carton #4 Electrical:
ページ10に含まれる内容の要旨
Motors: Main Main Specifications: Blade Information Cutting Capacities Table Information Fence Information Miter Gauge Information
ページ11に含まれる内容の要旨
Construction Other Related Information: Other Specifications: Features:
ページ12に含まれる内容の要旨
Safety Instructions for Machinery
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
Safety Instructions for Table Saws 1. SAFETY GUARDS. 8. CROSSCUTTING OPERATIONS. 9. BLADE HEIGHT. 2. KICKBACK. 10. WORKPIECE SUPPORT. Until you have a clear understanding of kickback and how it occurs, DO NOT oper- ate this table saw! 11. DAMAGED SAW BLADES. 3. REACHING OVER SAW BLADE. hands or arms will be pulled into 12. DADO AND RABBET OPERATIONS. the saw blade if kickback occurs. 4. WORKPIECE
ページ15に含まれる内容の要旨
Preventing Kickback Statistics show that most common acci- dents among table saw users can be Below are tips to avoid the most common linked to kickback. Kickback is typically causes of kickback: defined as the high-speed expulsion of stock from the table saw toward its opera- tor. In addition to the danger of the opera- tor or others in the area being struck by the flying stock, it is often the case that the operator’s hands are pulled into the blade during th
ページ16に含まれる内容の要旨
Glossary of Terms VERY Arbor: Non-Through Cut: Page 35 Bevel Edge Cut: Parallel: Page 38 Blade Guard Assembly: Perpendicular: Page 33 Push Stick: Crosscut: Page 48 Page 37 Rabbet: Dado Blade: Page 40 Page 47 DO NOT use a dado blade Rip Cut: larger than 8" in diameter on this saw! Page 36 Riving Knife: Dado Cut:
ページ17に含まれる内容の要旨
SECTION 2: CIRCUIT REQUIREMENTS Power Connection Device 220V Operation Figure 2 Serious personal injury could occur if you connect the machine to power before com- pleting the setup process. DO NOT connect the machine to the power until instructed later in this manual. Electrocution or fire could result if machine is not grounded and installed in compliance with electrical Figure 2 codes. Compliance MUST be verified by a qualifie
ページ18に含まれる内容の要旨
SECTION 3: SETUP Items Needed for This machine presents Setup serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine! Description Qty Wear safety glasses dur- ing the entire setup pro- cess! This machine and its com- ponents are very heavy. Get lifting help or use power lifting equipment such as a forklift to move
ページ19に含まれる内容の要旨
Hardware Recognition Chart
ページ20に含まれる内容の要旨
Inventory Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes. Box Contents: (Figures 3–5) Qty Figure 3. A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. Figure 4. Hardware (Not Shown) Qty SUFFOCATION HAZARD! Immediately
