ページ1に含まれる内容の要旨
MODEL G0555LX
14" DELUXE BANDSAW
OWNER'S MANUAL
(For models manufactured since 01/12)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
ページ2に含まれる内容の要旨
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION ............................................... 2 SECTION 1: SAFETY ....................................... 6 SECTION 5: ACCESSORIES ......................... 40 SECTION 2: POWER SUPPLY ........................ 9 SECTION 6: MAINTENANCE ......................... 43 SECTION 7: SERVICE ................................... 44 SECTION 3: SET UP ..
ページ4に含まれる内容の要旨
INTRODUCTION Manual Accuracy Contact Info your machine may not exactly match the manual Machine Description www.grizzly.com
ページ5に含まれる内容の要旨
Identification Figure 1. For Your Own Safety, Read Instruction Manual Before Operating Bandsaw a) Wear eye protection. b) Do not remove jammed cutoff pieces until blade has stopped. c) Maintain proper adjustment of blade tension, blade guides, and thrust bearings. d) Adjust upper guide to just clear workpiece. e) Hold workpiece firmly against table.
ページ6に含まれる内容の要旨
Machine Data Sheet Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
Weight.............................................................................................................................................................. 229 lbs. Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 27 x 30 x 67-1/2 in. Footprint (Length x
ページ7に含まれる内容の要旨
Maximum Cutting Height............................................................................................................................. 6 in. Max Capacity Left of Blade.................................................................................................................. 13-1/2 in. Standard Blade Length........................................................................................................................ 93-1/2 in. Blade Width Range......................
ページ8に含まれる内容の要旨
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Always
ページ9に含まれる内容の要旨
WEARING PROPER APPAREL. FORCING MACHINERY. NEVER STAND ON MACHINE. HAZARDOUS DUST. STABLE MACHINE. USE RECOMMENDED ACCESSORIES. HEARING PROTECTION. UNATTENDED OPERATION. OFF REMOVE ADJUSTING TOOLS. MAINTAIN WITH CARE. INTENDED USAGE.
ページ10に含まれる内容の要旨
Additional Safety for Bandsaws BLADE CONDITION. CUTTING TECHNIQUES. HAND PLACEMENT. LEAVING WORK AREA. WORKPIECE MATERIAL. FEED RATE. BLADE REPLACEMENT. SMALL WORKPIECE HANDLING. BLADE SPEED. GUARDS. BLADE CONTROL.
ページ11に含まれる内容の要旨
SECTION 2: POWER SUPPLY Availability Circuit Information For your own safety and protection of property, consult an electrician if you are Electrocution, fire, or unsure about wiring practices or electrical equipment damage may codes in your area. occur if machine is not correctly grounded and Note: The circuit requirements listed in this man- connected to the power ual apply to a dedicated circuit—
ページ12に含まれる内容の要旨
Grounding Requirements SHOCK HAZARD! Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. For 220V operation:
ページ13に含まれる内容の要旨
To convert the machine to 220V: Extension Cords 1. 2. 3. Figure 4 Motor Pre-wired for 110V Minimum Gauge Size ...........................14 AWG Maximum Length (Shorter is Better).......50 ft. Voltage Conversion Figure 4. 4. Figure 4 Motor Rewired Note: If the diagram included on the motor con- for 220V flicts with t
ページ14に含まれる内容の要旨
SECTION 3: SET UP Set Up Safety Needed for Setup This machine presents serious injury hazards Description Qty to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine! Wear safety glasses dur- ing the entire set up pro- Unpacking cess! This machine and its com- ponents are very heavy. please imme- Get lifting help or use diately call us at (570) 546-9
ページ15に含まれる内容の要旨
Inventory Inventory (see Figure 6) Qty A. B. C. D. E. F. G. H. I. J. K. L. M. N. Figure 6. NOTICE If you cannot find an item on this list, care- fully check the machine and the packaging materials. Some of these items may be pre- installed for shipping or become misplaced during un
ページ16に含まれる内容の要旨
Cleanup Gasoline or products with low flash points can explode or cause fire if used to clean machin- ery. Avoid cleaning with these products. Many cleaning solvents are toxic if concentrat- ed amounts are inhaled. Only work in a well-venti- lated area. NOTICE Avoid chlorine-based solvents, such as acetone or brake parts cleaner, that may Before cleaning, gather the
ページ17に含まれる内容の要旨
Site Considerations Weight Load Physical Environment Machine Data Sheet Space Allocation Electrical Installation See below for required space allocation. Lighting Children or untrained people may be seriously injured by this machine. Only install in an access restricted lo
ページ18に含まれる内容の要旨
2. Assembly Figure 9 Some sheet metal parts may have sharp edges that can cause minor cuts. Please use care while han- dling them. The bandsaw is heavy and awkward to lift onto the stand. Get assistance from another person when lifting. Figure 9. To assemble the bandsaw: 3. Figure 10 1. Figure 8 Note: Adjust the feet so that they are approxi-
ページ19に含まれる内容の要旨
4. 7. Figure 11 8. Figure 13 Figure 11. 5. 6. Figure 12 Figure 13. 9. Figure 14 Figure 12. Figure 14.
ページ20に含まれる内容の要旨
10. 14. Figure 17 11. Figure 15 Figure 17. 15. Figure 18 Figure 15. 12. 13. Figure 16 Figure 18. Figure 16.
