ページ1に含まれる内容の要旨
MODEL G0460/G0461
12" SLIDING TABLE SAW
OWNER'S MANUAL
COPYRIGHT © JANUARY, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR8129 PRINTED IN TAIWAN
ページ2に含まれる内容の要旨
����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION ............................................... 2 SECTION 4: OPERATIONS ........................... 32 Foreword ........................................................ 2 Operation Safety .......................................... 32 Contact Info ................................................... 2 Operation Tips ............................................. 32 Machine Data Sheet ...................................... 3 Changing Blades ............................
ページ4に含まれる内容の要旨
INTRODUCTION Foreword Contact Info We are proud to offer the Model G0460/G0461 12" If you have any comments regarding this manual, Sliding Table Saw. This machine is part of a grow- please write to us at the address below: ing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in Grizzly Industrial, Inc. C this manual, you can expect years of trouble-free, /O Technical Documentation Manager enjoyable operation and proof of Grizzly’s com- P.O. Box 2069
ページ5に含まれる内容の要旨
Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MODEL G0460/G0461 12" SLIDING TABLE SAW Overall Dimensions: Overall Size (with Cross Slide Fence and Sliding Table Extended) .....................................................132" W x 136" D x 48" H Table Height .........................................................................................................................................................
ページ6に含まれる内容の要旨
� � �� � � �� � � � � �� � � �� � � � � � � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������� ������ �� ������ ���� �������� � ����� �� �� ��� ��� ��� ������������� ��������� ��� ��� ��� ������������� ������������� ��� ���������� ���������� ��� ��� ��� ��������� �������������������� ������������� ��� ��� ��� ��� ������������� ������������� �����������������������������
ページ7に含まれる内容の要旨
Identification D B A E G C F H J I Figure 1. Main view of machine features and controls. A. Flip Stops: Used for quick measurements F. Sliding Table: Conveniently glides the when crosscutting. workpiece through the blade with effortless precision and ease. B. Crosscut Fence: Used during crosscutting operations. Features a scale and multiple G. Blade Height Handwheel: Adjusts the height flip-style stop blocks for precise, repeatable of the blade. crosscutting operations. H. Magnetic Switch:
ページ8に含まれる内容の要旨
R K Q L T U V M S W P N O Figure 2. Fence controls. Figure 3. Blades. K. Rip Fence Lock Handle: Secures the fence Q. Riving Knife: Maintains kerf opening during face on its forward/backward slide track. cutting operations. This function is crucial to preventing kickback caused by the kerf clos- L. Micro-Adjust Knob: Precisely adjusts the ing behind the blade. fence. R. Main Blade (Not Included): Performs the cut- M. Rip Fence Scale: Allows precise measure- ting operations. ment of rip cutting
ページ9に含まれる内容の要旨
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measure
ページ10に含まれる内容の要旨
Safety Instructions for Machinery 7. ONLY ALLOW TRAINED AND PROP- 17. REMOVE ADJUSTING KEYS AND ERLY SUPERVISED PERSONNEL TO WRENCHES. Make a habit of checking for OPERATE MACHINERY. Make sure oper- keys and adjusting wrenches before turn- ation instructions are safe and clearly ing machinery ON. understood. 18. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS AWAY. BEFORE USING MACHINERY. Check Keep all children and visitors a safe dis- for binding and alignment of parts, broken tanc
ページ11に含まれる内容の要旨
Safety Instructions for Sliding Table Saws 1. SAFETY ACCESSORIES. Always use the 7. RIP FENCE USAGE. When using the blade guard and riving knife on all ''through- crosscut fence, the workpiece should never sawing'' operations. Through-sawing oper- contact the rip fence while the saw blade is ations are those when the blade cuts com- cutting. pletely through the workpiece. 8. STALLED BLADE. Turn the saw OFF 2. KICKBACK. Kickback is defined as high before "freeing" a stalled saw blade. speed e
ページ12に含まれる内容の要旨
• Make multiple, shallow passes when per- forming a non-through cut. Making a deep non-through cut greatly increases the chance Statistics prove that most common acci- of kickback. dents among table saw users can be linked to kickback. Kickback is typically defined • Feed cuts through to completion. Anytime as the high-speed expulsion of stock from you stop feeding a workpiece in the middle of the table saw toward its operator. In addi- a cut, the chance of kickback greatly increas- tion
ページ13に含まれる内容の要旨
Glossary of Terms The following is a list of common definitions, terms and phrases used throughout this manual. Become familiar with these terms for assembling, adjusting or operating this machine. Your safety is VERY important to us at Grizzly! Arbor: A metal shaft extending from the drive Non-Through Cut: A sawing operation that mechanism on which the saw blade is mount- requires the removal of the blade guard and ed. riving knife. Dado and rabbet cuts are con- sidered Non-Through Cuts be
ページ14に含まれる内容の要旨
SECTION 2: CIRCUIT REQUIREMENTS 220V Plug/Connection Type G0460 220V 1-Phase .................................L6-30 Serious personal injury could occur if you G0461 220V 3-Phase ............................... L15-30 connect the machine to the power source before you have completed the setup pro- cess. DO NOT connect the machine to the power source until instructed to do so. Full Load Amperage Draw G0460 5 HP 220V 1-Phase ...................22 Amps G0461 7.5 HP 220V 3-Phase ................20
ページ15に含まれる内容の要旨
Grounding Rewiring to 440V In the event of an electrical short, grounding reduces the risk of electric shock. Improper con- nections of the electrical-grounding conductor The Model G0461 can be rewired for 440V opera- increase the risk of electric shock. Ensure that tion. This rewiring job consists of disconnecting this machine is properly grounded before operat- the saw from the power source, installing the ing it. magnetic switch assembly from the 440V conver- sion kit, and rewiring the m
ページ16に含まれる内容の要旨
3. Remove the motor junction box cover (see 5. Remove the magnetic switch cover. Figure 8). 6. Replace the original magnetic switch assem- bly with the assembly included in the 440V Motor conversion kit. Set the dial on the new over- Junction Box load relay to 11A (Figure 9). Magnetic Contactor Figure 8. Motor location. Overload 4. Rewire the motor per the diagram on the Relay Dial inside of the motor junction box, using the additional wiring nuts included with the 440V conversion kit. N
ページ17に含まれる内容の要旨
SECTION 3: SETUP Setup Safety Unpacking The Model G0460/G0461 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed This machine presents for delivery, please immediately call Customer serious injury hazards Service at (570) 546-9663 for advice. to untrained users. Read through this entire manu- Save the containers and all packing materials for al to become familiar with possible inspection by the carrier or its agent. the contro
ページ18に含まれる内容の要旨
Clean Up Inventory After all the parts have been removed from the The unpainted surfaces are coated with a waxy two boxes, you should have the following items oil to prevent corrosion during shipment. Remove included with the base unit of the saw: this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Inventory ...................................................... Qty Citrus Degreaser. To clean thoroughly, some parts A. Large Extension Wing .....
ページ19に含まれる内容の要旨
H. Lock Plate ................................................... 1 P. Hold-down .................................................. 1 I. Crosscut Aluminium Fence ........................ 1 Q. Edge Shoe .................................................. 1 J. Crosscut Table ........................................... 1 K. Flip Stops w/Knobs, T-Nuts & Washers ..... 2 L. Adjustable Handles .................................... 2 P H I J Q K L Figure 15. Included accessories. Hardware and Tools Figure
ページ20に含まれる内容の要旨
Hardware Recognition Chart -18- G0460/G0461 12" Sliding Table Saw
