ページ1に含まれる内容の要旨
Operator's Manual
I;RRFTSMRN+I
7-in. Tile Wet Saw
with LASER TRAC TM
Model No.
118.22000
• WARRANTY
A
• SAFETY
z-_CAUTION: Read, understand and follow
• ASSEMBLY
all Safety Rules and Operating Instructions in
• OPERATION
this Manual before using this product.
• MAINTENANCE
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman web site: www.sears.com/craftsman
1-19-06
ページ2に含まれる内容の要旨
I I I I The purpose of safety symbols is to attract your attention to possible dangers. Warranty .................................................................... Page 2 The safety symbols, and the explanations with them, deserve your careful Safety Symbols .................................................. Page 3 attention and understanding. The symbol warnings DO NOT by themselves eliminate any danger. The instructions and warnings they give are no substitutes Safety Instructions ..........
ページ3に含まれる内容の要旨
I I I I HAZARD SYMBOLS SAFETY PRECAUTIONS FOR LASERS cont. 1. The laser beam system is mounted to the blade guard. Never remove from blade Someof the followingsymbolsmaybe usedonthistool.Pleasestudy themandlearntheir guard to use on another tool or use for other purposes. meaning.Properinterpretation of thesesymbolswill allowyou to operatethe tool betterandsafer. 2. The laser beam can be harmful to the eyes. ALWAYS avoid direct eye exposure. SYMBOL NAME DESIGNATION/ EXPLANATION DO NOT look direc
ページ4に含まれる内容の要旨
I I I I TOOL USE AND CARE SAFETY ELECTRICAL SAFETY AND GROUNDING INSTRUCTIONS cont. 2. Grounded corded tools are z:_WARNING: BE SURE to read and understand all instructions before intended for use on supply circuits operating this saw. Failure to follow all instructions listed below may result having a nominal rating of less in electric shock, fire and/or serious personal injury. than 150 volts. The plug may not (A) Gru_ lUe_ dBedx \Grounding fit your outlet. 1. BE SURE the splash guard is intac
ページ5に含まれる内容の要旨
I I I I EXTENSION CORDS The label on your tool may include the following symbols. V................................................................. Volts 1. USE ONLY 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that will accept the tool's plug. A ................................................................ Amps Hz .............................................................. Hertz 2. Use a proper extension cord. ONLY use cords listed by Underwriters W ...
ページ6に含まれる内容の要旨
I I I I SAFETY RULES FOR TILE WET SAWS cont. ADDITIONAL RULES FOR SAFE OPERATION cont. 6. NEVER try to cut freehand. Make sure that the tile to be cut is pressed firmly 8. DO NOT abuse the cord, NEVER use the cord to carry the tool or pull the against the rip fence. plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cord immediately. Damaged cords increase the risk of 7. NEVER cut pieces too small to be held securely against the fence without electr
ページ7に含まれる内容の要旨
I I I I KNOW YOUR SAW (Fig. 3) KNOW YOUR SAW ( Fig. 3) cont. Your tile wet saw has a precision-built electric motor and it should only be connected to a 120-volt, 60Hz AC ONLY power supply (normal household currant). DO NOT Water and Electric | operate on direct current (DC). The large voltage drop would cause a loss of power "On/Off" Switch Supply Hose and the motor would overheat. If the saw does not operate when plugged into the correct 120-volt, 60-Hz AC ONLY outlet, check the power supply.
ページ8に含まれる内容の要旨
I I I I LOOSE PARTS LIST cont. 1. Place carton on the floor in an area with sufficient space to inspect your saw. 2. Remove carton and packing materials from around tool. 8. To stabilize and level the tile saw, adjust the leveling "set screw" located on the bottom of the left front leg (Fig. 10). 3. Inspect the saw for loose or damaged parts. If any parts are damaged or missing, return the saw to your nearest Sears Store to have it replaced. 9. Attach blade/cutting assembly handle with screws pr
ページ9に含まれる内容の要旨
I I I I MOUNTING LASER SYSTEM INSTALLING THE BLADE cont. 5. REPLACE blade guard with the two securing screws. 1. Locate laser package and find the following parts as shown in (Fig. 14): 6. RE-ATTACH water supply tube to the inlet connection. a) Laser light system. b) Two 6/32 screws with washers. 2. Loosen bolt and remove cover. Install two AAA batteries (Fig.15), making sure both terminals are positioned correctly as the marks on the cover show, then replace cover. 3. Screw laser system onto bl
ページ10に含まれる内容の要旨
I I I I MAKING A MITER CUT z_WARNiNG:Turn off the saw and remove the plug from the outlet 1. Loosen the knob and position the rip/miter guide so BEFORE adding or removing accessories and making adjustments. Failure that the correct angle you want, 0 to 45 , is lined up to unplug the saw could result in accidental starting causing possible with the notch (Fig. 28). Tighten knob at that position. serious injury 2. Align tile with rip!miter guide and hold firmly against guide. Turn on laser switch.
ページ11に含まれる内容の要旨
I I I I MOVING THE SAW cont. REPLACING THE BLADE (See page 14, Figs. 18, 19, 20 and 20a) 4. Your tile wet saw has been equipped with a set of wheels for easy transporting. z_WARNING: MAKE SURE that you disconnect the power supply before 1 They are to be used when the legs of the saw table are in the closed, or folded up replacing the blade. J position. To use wheels, simply pull out and down on the black handle located on the wheels' axle (Fig. 32). When not using the wheels, and to set up the s
ページ12に含まれる内容の要旨
I I I I REPLACING THE PUMP PROBLEM CAUSE SOLUTION Only use identical replacement parts, available at your Sears Parts and Repair Center. To locate a Sears Parts and Repair Store near you, call the 800 number The ventilation slots in the motor Clean the ventilation slots The motor located on the back of this manual. is hot. are clogged with dirt 1. Remove the water tray from the saw table. Remove pump from housing in water The motor is defective Have your machine repaired tray. Set tray aside. Lo
ページ13に含まれる内容の要旨
I I I I oJ \ 0 rn 0 _. 03 I_ 00 O3 o 6 e,l cO _O__ e,l o3 0 o o oooooo OOOOOOOO o o o o o o o 0 ooo o o oooooo OOOOOOOO o o o o o o o o o o oooooo OOOOOOOO o o o o o o o oJ oJ oJ oJ oJ oJ oJ oJ oJ oJ 0. oJ oJ oJ 0J 0J oJ oJ oJ oJ oJ • 0 C o 0__ (D O (D W 0;0; 5_ O ._o _zc .__ F, Z C 5 _=_ a __< coo __*_= o O0 •- _ © o __o _II 0 rt_ O. r_ n >- I.Li r¢- ° I O ON- -- C re- mO C_ W O_ 03 03 •_- u'3 qD b.. _0 0"3 o 6 T _, T _1 TTTT TT TT T TT _, O o o o O O o o OOOO o o o o o o o o o o o ooo o o o o
ページ14に含まれる内容の要旨
NOTES NOTES 26 27
ページ15に含まれる内容の要旨
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling system, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair o
