ページ1に含まれる内容の要旨
VP3D1
3D Video Processor
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
viewsonic.com in English, or in specific languages using the Regional selection box in
the upper right corner of
ページ2に含まれる内容の要旨
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro
ページ3に含まれる内容の要旨
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety
ページ4に含まれる内容の要旨
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Con- Substance Actual Concentration centration Lead (Pb) 0,1% <
ページ5に含まれる内容の要旨
Copyright Information ® Copyright © ViewSonic Corporation, 2011. All rights reserved. ® ® ™ ® ViewSonic , the three birds logo, On View , ViewMatch , and ViewMeter are registered ® trademarks of ViewSonic Corporation. ® Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. ® In the interest of continuin
ページ6に含まれる内容の要旨
CONTENTS Introduction ........................................................................2 Features ......................................................................................................................2 Package Contents .......................................................................................................2 Product Overview ...............................................................3 Front View ............................................................
ページ7に含まれる内容の要旨
Introduction Features Convert 3D video from several popular formats for display on DLP-Link 3D ready projectors. TM Automatically identify 3D input signal from 3D Blu-ray Disc Player and convert it to 720p 120Hz. Compatible with HDMI 1.4a 3D formats including side-by-side, etc. Pass 2D images unaltered for normal display Manually convert side-by-side 3D signal by pressing SBS Mode button. Environmental conditions: Temperature: Operating: 5°C ~ 35°C (41°F ~ 104°F) Non-operating:
ページ8に含まれる内容の要旨
Product Overview Front View 1 2 3 4 SBS (Side-By-Side) Mode 3 HDMI 1 button 1 button HDMI 2 button POWER button 2 4 Rear View 5 6 7 8 DC power input 7 HDMI in 1 / HDMI in 2 5 Service HDMI out (to projector) 6 8 3
ページ9に含まれる内容の要旨
LED Indicators Power LED is red. SBS MODE LED is blue when this feature is selected. HDMI 1LED is blue when this input source is selected and detected. HDMI 2 LED is blue when this input source is selected and detected. Power LED SBS MODE HDMI 1 HDMI 2 Status (Red) (Blue) (Blue) (Blue) Standby state Off Off Off Off (Input power cord) HDMI 1 input source Steady light Off Steady light Off (Default) HDMI 2 input source Steady light Off Off Steady light HDMI 1 input source & Steady light Steady li
ページ10に含まれる内容の要旨
Connecting Video source devices Sky+HD, Cable / Satellite box VP3D1 3D Video Processor 3D Capable DLP Projector PlayStation 3 3D Blu-ray™ Player 3D Glasses 5 menu
ページ11に含まれる内容の要旨
Using the 3D Video Processor Once you have connected your devices together with HDMI cables, as shown in the diagram, you are ready to begin. Power ON your 3D video source, 3D Video Processor and your 3D projector.(*) Note *: The 3D video source device must be powered on before the 3D Video Processor. ® PlayStation 3 Games 1. Make sure that you have updated your console to the latest software version in ® PlayStation 3. 2. Go to the "Settings menu → Display settings → Video output → HDMI".
ページ12に含まれる内容の要旨
Operation TM 1. Connect your VP3D1 3D Video Processor to a 3D Blu-ray Player using a HDMI cable. ® 2. Connect your VP3D1 3D Video Processor to a 3D Ready DLP projector using another HDMI cable. TM Player, VP3D1 3D Video Processor and 3D 3. Turn on your sources (3D Blu-ray ® Ready DLP projector). 4. Press the “PLAY” button on the player. 3D Blu-ray™ Player 5. Make sure the power of the 3D glasses is on. 6. Wear the 3D glasses, and then enjoy your 3D experience! HDMl-lN HDMl-OUT 3D Ready DLP
ページ13に含まれる内容の要旨
Specifications Native 3D output resolution HD Ready 720p120Hz Maximum output resolution Full HD 1080P Inputs 2x HDMI 1.4a (HDCP) - audio supported USB type A for firmware update Outputs 1x HDMI 1.3 (HDCP) - audio supported 2D video compatibility PAL SECAM 576i/p, NTSC 480i/p, HD 720p/1080i/1080p Power supply (AC adapter) AC 100-240 V, 50 - 60 Hz, 3.0A Power consumption 10W (<1W standby) Dimension (W x D x H) 430 x 210 x 36 mm Weight 1.3kg ( 2.9lb) Note: Design and Specifications are subject to c
ページ14に含まれる内容の要旨
Troubleshooting No image appears on screen. 1. Ensure all the cables and power connections are correctly and securely connected as described in the "Connection" section. 2. Ensure all the pins of connectors are not bent or broken. 3. Make sure you have powered on all the devices. Blurry double image. 1. Press "SBS Mode" button to "Off" to avoid normal 2D image is blurry double image. 2. Two images, side-by-side format. 3. Press "SBS Mode" button to "On" for input signal is HDMI 1.3 2D 1080
ページ15に含まれる内容の要旨
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. T = Telephone Country/Region Website Email F = FAX AUS= 1800 880 818 Australia/New Zealand www.viewsonic.com.au service@au.viewsonic.com NZ= 0800 008 822 T (Toll-Free)= 1-866-463-4775 Canada www.viewsonic.com T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/support/call-
ページ16に含まれる内容の要旨
Limited Warranty ® VIEWSONIC 3D Video Processor What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warran
ページ17に含まれる内容の要旨
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss
ページ18に含まれる内容の要旨
