ページ1に含まれる内容の要旨
Digital Free-To-Air Satellite
Receiver SRT 60
User Manual
Picture similar
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
TABLE OF CONTENTS 1.0 SAFETY INSTRUCTIONS 2 1.1 Equipment Set-up 6 1.2 Features and accessories 6 2.0 CONNECTION 7 3.0 REMOTE CONTROL 7 4.0 GETTING STARTED 8 4.1 Connecting to TV Set and Switching-On 8 4.2 First Time Installation 8 5.0 MAIN MENU 9 5.1 Channel Manager 10 5.2 Program Guide 10 5.3 Timer 10 5.4 User Installation 11 5.5 Receiver Information 13 6.0 OPERATION 14 6.1 Standby/Power button 14 6.2 Changing Channels 14 6.3 Volume Control 14 6.4 Language Selection 14 6.5 Audio Mode 14
ページ5に含まれる内容の要旨
1.0 SAFETY INSTRUCTIONS TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE FOR SERVICING. CAUTION: To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer servicing only to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral tri
ページ6に含まれる内容の要旨
INSTALLATION 1. Read and Follow Instructions - All the safety and operation instructions should be read before the product is operated. Follow all operating instructions. 2. Save Instructions – Save all safety and operating instructions for future reference. 3. Heed Warnings – Read carefully and follow all warning labels on the product and those described in the instructions. 4. Grounding, Polarization – If this product is used with a specified AC adapter, the adapter may be equipped with a p
ページ7に含まれる内容の要旨
by the manufacturer’ or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and use of a mounting accessory recommended by the manufacturer. 11a. A product and card combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. Note to CATV system installer. This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which pr
ページ8に含まれる内容の要旨
E. If the product has been dropped or cabinet has been damaged. F. W hen the product exhibits a distinct change in performance-this indicates a need for service. 19. Replacement Parts - When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the product manufacturer can prevent fire, electric shock, or other hazards. 20. Safety Check - Upon completion
ページ9に含まれる内容の要旨
SERVICING: Do not attempt to service this product yourself. Any attempt to do so will make the warranty invalid. Refer all servicing to a qualified service agent. LIGHTNING: If the receiver is installed in an area subject to intense lightning activity , protection devices for the receiver mains connector and modem telephone line are essential. The individual manufacturer’s instruction for safeguarding other equipment, such as TV set, Hi-Fi, etc., connected to the receiver must also be
ページ10に含まれる内容の要旨
n User-friendly Remote Control n Low power consumption n Automatic and manual channel scan options n 12 V mains supply for usage with camping caravans or houseboats (Car cigarette lighter adapter optional) n Connections: SAT IN, IR-Eye, Power Supply *subject to local signal conditions Accessories: n Remote control n IR-Eye n SCART Cable n Power adaptor 230V AC to 12V DC / 2A 2.0 CONNECTION 1. SAT IN - Connection for satellite antenna. 2. IR IN – Connection for remote control IR-eye. 3. DC IN –
ページ11に含まれる内容の要旨
1. Power On/Standby (Switch to ON/STANDBY mode) 2. Numeric entry (Enter numeric values and to select the channel directly by entering it’s number) 3. FAV (Open up Favourite list) 4. SAT (Open Satellite list) 5. EPG (Open up Electronic Program Guide menu) 6. EXIT (Exit from menu) 7. RED (information onscreen when to use) 8. GREEN (information onscreen when to use) 9. YELLOW (to activate Subtitle) 10. BLUE (information onscreen when to use) 11. MENU (Open up menu) 12. CH p/CH q select channel
ページ12に含まれる内容の要旨
4.2.1 Language Selection Select the language of your choice with Up/Down buttons and press OK to confirm. The SET UP WIZARD menu will appear. It describes functional buttons that you should use during installation. Once you read information press OK button to continue. 4.2.2 Satellite Selection The Installation Wizard preconfigured for easy installation of Astra 19.2°E or Hotbird 13°E. For these satellites LNB configuration is predefined as Universal LNB connected to the receiver via DiSEqC 1.0
ページ13に含まれる内容の要旨
5.1 Channel Manager For building favourite groups, moving, locking or deleting channels. 1. Press the MENU button to enter the “Main Page”. 2. Use UP/DOWN buttons to select “Channel Manager” and press OK. 3. Use UP/DOWN buttons to select “TV channels” or ”Radio channels” for modifying one of this lists. Press OK to confirm. 4. Press the RED “Delete” button to delete channels. Use UP/DOWN buttons to select a channel to delete and press OK to confirm (you can reverse the confirmation if you press
ページ14に含まれる内容の要旨
5.3.1 Time Adjust For setting time and date: 1. Use UP/DOWN buttons to select. 2. Use LEFT/RIGHT, OK and UP/DOWN, or Numeric keypad to change settings. 3. Press EXIT button to quit and save Setting. 5.3.2 Time Reservation In this menu you can program a timer to switch to a certain channel at the desired time. Available repeat- rates are: One Time, Daily, Weekly or Monthly. Use UP/DOWN buttons to select. 1. Use LEFT/RIGHT, OK and UP/DOWN, or Numeric keypad to change settings. 2. Press EXIT button
ページ15に含まれる内容の要旨
n Transponder: Here it is possible to select a stored transponder from the chosen satellite. This is necessary if you only wish to search for a certain transponder. You can also edit a new transponder here. Press OK and select “NewTP” in the list. Now the values for Frequency, Symbol Rate and Polarization are editable. The new Transponder will be added in the end of the list. NOTE: If the desired satellite is neither in the list nor configured, it is possible to add a new satellite position
ページ16に含まれる内容の要旨
activate it by pressing the the yellow SUB button and choose one of the provided languages. n Screen Format: You can choose between following formats: 4:3, 16:9 and 4:3 Letterbox. n Video Output: You can select the output signal at the scart plug between RGB and CVBS. n TV Type: To select the video standard: PAL or NTSC. n Start On Channel: Press OK button to select the channel which should be shown every time you switch on the receiver. With the setting to “None” always the last viewed chan
ページ17に含まれる内容の要旨
6.0 OPERATION 6.1 Standby/Power button Press STANDBY/POWER button, to switch ON your receiver. If you press STANDBY/POWER button again it is set to Standby mode. 6.2 Changing Channels 1. Stepping through the channel list: To move through the channel list, press the CH- / CH+ (UP/DOWN) keys on the remote control. 2. Selection by on-screen channel list: Press OK on your remote to select the required channel directly from on screen channel list. n Press UP/DOWN buttons to select channel ste
ページ18に含まれる内容の要旨
6.8 Subtitle n Press YELLOW “SUB” button to switch on subtitle support. n Press EXIT to leave the subtitle function. 6.9 Displaying program information You can read the current program information if you press the INFO button (or OK button twice) on the remote control. n Press RED button for EPG Details of the running program. The info will disappear after 5 sec. or after pressing INFO button again. n Press GREEN button to show detailed signal information. The info will disappear after 5 sec.
ページ19に含まれる内容の要旨
No picture or sound -Tuned to digital teletext channel -Reduce to another channel -Bad reception -Check Signal -Channel has changed Transponder -Check according to satellite service or Audio/Video data values or at www.strong.tv The remote control unit - Power supply unplugged - Connect Power supply (RCU) will not operate your receiver - RCU not aimed correctly - Aim RCU at IR-eye - IR-eye obstructed, not well - Check for obstructions, connection connected or defective of IR-Eye or try anothe
ページ20に含まれる内容の要旨
Audio Decoder MPEG Audio Layer I & II (MusiCam) Sampling rate: 32, 44.1 and 48 KHz Audio modes: Stereo, Joint Stereo, Mono, Dual Mono Tuner Input Frequency Range: 950 ~ 2150 MHz Input Signal Level: -25 ~ -65 dBm Input Connector: F Type Input Impedance: 75 Ohm unbalanced LNB Supply: 14.0 / 19.0 V (max. 350 mA) LNB band Control: Frequency: 22 ± 4 KHz Amplitude: 0.6 ± 0.2 V DiSEqC Control: Version 1.0 compatible Memory and System Flash memory: 2 MByte Serial Flash SDRAM: 16 M
