ページ1に含まれる内容の要旨
Operating Manual
Order no.: 260 494
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Safety Instructions Preface Dear Customer, The following operating manual will help you obtain the best optimal use from the extensive features of your new satellite receiver. We have written this operating manual as comprehensibly as possible and as con- cise as necessary. A brief lexicon containing specialised terms not easily translat- able has been appended at the end of this manual. To further assist you in your search for a specific term, we have also added an index. We ha
ページ4に含まれる内容の要旨
Safety Instructions Contents Preface...............................................................................................................................................................3 Contents ............................................................................................................................................................4 Safety Instructions ................................................................................................................
ページ5に含まれる内容の要旨
Safety Instructions Programme overview .....................................................................................................................................22 EPG ..............................................................................................................................................................22 Full EPG.....................................................................................................................................................
ページ6に含まれる内容の要旨
Safety Instructions Remote frequency................................................................................................................................. 40 UFO micro............................................................................................................................................. 40 Factory setting.......................................................................................................................................... 41 Video recorder c
ページ7に含まれる内容の要旨
Safety Instructions Safety Instructions Important notes regarding operation The following section contains important information relating to the operation, place of installation and connecting-up of the receiver. Read these notes carefully before putting the unit into operation. Extended absence / thunderstorms Always switch the unit off via its mains switch (at front left on unit) during periods of extended absence or at the onset of thunderstorms. This also applies to any other equipm
ページ8に含まれる内容の要旨
Operating elements, displays and connections Important notes for siting and installation. Place of installation Every electronic device generates heat. The rise in temperature, however, lies within a safe range. Slight colour changes may occur to sensitive furniture surfaces and veneers over the course of time due to the constant effect of heat. In conjunc- tion with treated furniture surfaces, the unit’s rubber feet can likewise give rise to changes in colour. Where necessary place the un
ページ9に含まれる内容の要旨
DIGITAL SATELLITE RECEIVER Operating elements, displays and connections Operating elements, displays and connections This section contains a brief description of all the control elements, displays and connections. The key symbols presented here are also used when describing op- erating sequences. View of front panel (Flap folded down) MENU SELECT 1 2 3 4 5 6 7 8 9 View of rear panel IF INPUT DIGITAL El
ページ10に含まれる内容の要旨
Operating elements, displays and connections Remote control handset keys Power On - Switch over of the Standby remote control Calls up main Calls up favourite menu categories Programme Last programme information and exit Calls up Setting scart programme list connection Radio Off
Volume / Menu entries Programme selec- tion / Selection of submenus and menu entries Confirmation of the submenus and main ent
ページ11に含まれる内容の要旨
Connection and putting into operation Remote control features The remote control features 2 command sets, making it possible to operate 2 receivers independently of each other in one room (not together with a twin receiver). Note For this purpose, program one receiver on the command set 1 and the second receiver on the command set 2. Switch on receiver 1 and receiver 2 off with the power switch Press and hold the button. Enter "901" with the number buttons. T o adopt
ページ12に含まれる内容の要旨
Connection and putting into operation Menu concept Note: Coloured backgrounds are used to emphasise the selected menus, submenus and menu items as well as the parameters to be set. The menus are to a large extent self-explanatory. You will find information relating to the selected menu point in the information box displayed under the menu. Press the to select the main menu and press the - buttons to se- lect the submenus. Press to access the submenus. The items in the submenu
ページ13に含まれる内容の要旨
Operating instructions Alphanumeric assignments of number buttons on the remote control Button 1 X 2 X 3 X 4 X 1 Q Z - 2 A B C 3 D E F 4 G H I 5 J K L 6 M N O 7 P R S 8 T U V 9 W X Y 0 SPACE Language selection- OSD To select the language for the on-screen menus press: menu language English The available languages are German, English, French, Italian, Span- ish, Portuguese,
ページ14に含まれる内容の要旨
Operating instructions Connection and putting into operation The following section is specifically intended for the specialist dealer. You only need to read this section if you are carrying out the installation yourself. You will find sample configurations in the section "Connection examples". First carry out all installation work before connecting the receiver to the mains power supply. Refer to the information provided in the section "Safety instructions“. To connect receiver Sat-IF
ページ15に含まれる内容の要旨
Operating instructions LNB-supply voltage If the feed system (LNB) is powered by an external supply voltage and the LNB supply voltage is not used for switching over polarity (e.g. Kathrein feed system UAS 330), the LNB supply of the receiver must be set to "OFF" (see section "Installation menu, LNB configuration“). TV and video recorder connection Use a SCART cable to connect the satellite receiver (TV SCART) and TV set. If your TV set is equipped for stereo output, you can receive
ページ16に含まれる内容の要旨
Operating instructions First time operation The first steps Connect the receiver to the mains power supply. Switch on the receiver by pressing the power button at the front of the unit. You will see "- - - -“ in the LED display, afterwards "0000." The operation indicator LED lights red, the receiver is now in standby mode. Switch on your TV set. Switch on the receiver by pressing the button on the remote control. The yellow LED at the front end of the receiver flashes every time a but
ページ17に含まれる内容の要旨
Programme selection On-screen displays On Screen Display Important on-screen displays The receiver functions are controlled by a microprocessor and extensive software. The following explanations are intended to improve understanding of all proce- dures and to minimise the risk of mistakes. TV channel identifier The channel identifier is displayed for several seconds every time the channel is changed or by pressing the button. The I indicates that a channel is received even if no pictu
ページ18に含まれる内容の要旨
Programme selection the programme is normally scrambled. The required programme can be selected with the bar cursor and confirmed by pressing the button. Radio programme list See above. The same applies to the radio programme list. Programme selection This section describes how you select analogue and digital TV programme with your receiver and how you can set the required volume. This description of the functions assumes that the receiver has been connected correctly. If you wish to c
ページ19に含まれる内容の要旨
On-screen displays On Screen Display Selecting a TV programme by number entry You can select a different TV programme during a current TV programme by enter- ing the programme location number. Use the number buttons to for the purpose of entering the programme lo- cations. Example You wish to select the TV channel "DSF". This programme is stored under the pro- gramme location number 015. (The order of TV programmes is defined in the pro- gramme memory and therefore only serves as an exampl
ページ20に含まれる内容の要旨
On-screen displays On Screen Display programme and by pressing the buttons you jump to the neighbouring page or enter-in the channel number with the buttons on the remote control. Confirm your programme selection by pressing the button, press the button to exit the programme list and remain in the programme already set. Selecting a radio programme by number entry You can select a different radio programme during a current radio programme by entering the programme location number. Use
