ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
CONTENTS SAFETY PRECAUTIONS ................................................2 IN THE BOX ....................................................................3 RECEIVER BUTTONS ....................................................4 REMOTE CONTROL BUTTONS ...................................5 REMOTE CONTROL BUTTONS ...................................6 PREPARATION ................................................................7 PREPARATION ............................................................
ページ3に含まれる内容の要旨
SAFETY PRECAUTIONS POWER Always use the provided AC adapter. Operate only from the power source specified AC 100-240 V,50/60Hz (6V DC , 1.5A) on the AC adapter. In using, the AC adapter get heat on the surface of the case. It is normal, not defective. Do not be covered with any material on case of AC adapter while it is in operation. Leave the 15 cm space(minimum) around the AC adapter. The rating information and safety caution of the AC adapter are on its case. LEADS Ensure the power supply lea
ページ4に含まれる内容の要旨
IN THE BOX Thank you for buying this JVC Degital Terrestrial Set Top Box. Inside your package you should have: Degital Terrestrial Set Top Box (STB) receiver AC adaptor x1 Remote control unit: RM-C1890S Dry battery for the remote control unit AA (R06) x2 Instruction book Warranty Card Aerial cable x1 Scart cable x1 - 3 -
ページ5に含まれる内容の要旨
RECEIVER BUTTONS Front: Standby button Program down/up buttons Back: ANTENNA ANTENNA TV DIGI TAL AUDIO OUT RS-232C DC IN (6V) OUT IN VCR/DVR (CO AXIA L) ANTENNA POWER ANTENNA RS 232 SPDIF TV VCR IN SUPPLY OUT DIGITAL SCART SCART AUDIO OUT - 4 -
ページ6に含まれる内容の要旨
REMOTE CONTROL BUTTONS Mute Standby Number buttons Slide Switch Information button AV button Colour buttons TV/DTV button MENU button Up/Down/ Right/Left buttons OK button BACK button Text button Programme Up/Down Volume Up/Down buttons ( [P+] [P-] buttons) buttons WIDE button GUIDE button PAGE UP/DOWN buttons SUBTITLE button VCR/DVD control buttons - 5 -
ページ7に含まれる内容の要旨
REMOTE CONTROL BUTTONS To operate this STB: Set the Slide Switch to STB position. For details of the use of each buttons, see each section’s explanation. Note: Volume-/+ buttons and the Mute button work for the volume from the TV. To operate a JVC brand TV or VCR: Set the Slide Switch to the TV/VCR position. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control. Note: Even you operating a JVC brand TV or VCR some b
ページ8に含まれる内容の要旨
PREPARATION Connections Place your receiver on a firm, level surface with at least a 10cm gap around all sides of the case and in a position convenient for connection to your television, a mains power outlet and a TV aerial wall outlet (or the 'flying lead' from your TV aerial, as appropriate). Please refer to the Safety Precautions on page 2. Turn off your television at the mains and disconnect the lead going to the aerial wall outlet (or the flying aerial lead) and connect this to the ANTENNA
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
Using the other two functions of the Channel List SELECT menu screen - LOCK and FAVOURITES - is dealt This function selects a channel for viewing and is with in the next sections. an alternative to using the [P+] and [P-] keys, Hint channel number or EPG. Highlight the channel to be viewed using the [LEFT] or [RIGHT] keys and press You can also enter a channel name using the [OK]. The highlighted channel now appears in the number keys on the remote control. Each key image window and you can leav
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
SPECIFICATION GENERAL Broad casting system DVB-T 2k & 8k Video system PAL Number of preset channels 200 Channel frequencies 47 - 858 MHz Stereo system MPEG Layer I & II 32/44.1/48kHz Power requirements DC 6V, AC adapter: 100 - 240V, 50/60 Hz Terminals U/V Input PAL type U/V Output PAL type SCART-1 (TV) RGB, Y/C, Video output and Audio output are available. SCART-2 (Aux) RGB, Y/C, Video output, Audio output and Video input are available. Digital Audio Output Coaxial RS 232C (for sevice use only)
ページ20に含まれる内容の要旨
CONNECTING THE EXTERNAL DEVICES If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the LT OUT on the receiver to the ANT IN on the rear of the VCR. Then connect an aerial lead from the LT OUT on the VCR to the ANT IN socket on the rear of your TV. If your VCR has only one scart socket, connect only Scart 1 to VCR. Connect a scart lead from the
