ページ1に含まれる内容の要旨
SIR-SL1C Satellite Radio Receiver User Guide
ページ2に含まれる内容の要旨
CONGRATULATIONS! Your new Brix Labs SIR-SL1C portable Plug-n-Play Receiver kit lets you enjoy SIRIUS Satellite Radio’s digital entertainment on the road or at home. (Home Docking Kit sold separately.) Use this manual to familiarize yourself with all of Streamer GT’s features and capabilities. Table of Contents Box Contents ....................................................................3 Menu Display Options ...................................................23 Safety Precautions ........
ページ3に含まれる内容の要旨
Box Contents The following items are packaged with the SIR-SL1C Streamer GT. Check the package to be all of the items are included. If any of the items are missing or damaged, please contact the dealer where you purchased the product. Clip Mount Streamer GT Receiver Remote Control Vehicle Power Adapter Suction Cup Mount Antenna It is recommended that you retain the original carton and packing materials in case you need to ship your Receiver in the future. Streamer GT SIR-SL1C User Guide
ページ4に含まれる内容の要旨
Safety Precautions Warning Warning T ake the following precautions to prevent fire and avoid T ake the following precautions to prevent traffic personal injury: accidents and avoid personal injury: • To avoid short circuits, never put or leave any • Installation must be performed according to metallic objects (coins, tools, etc.) inside the unit. this user guide. Brix Labs or Sirius Satellite • If the unit emits smoke or unusual odors, turn Radio is not responsib
ページ5に含まれる内容の要旨
• When replacing a fuse, use only a new one with Note the proper rating. Using a fuse with the wrong This equipment has been tested and found to comply rating may cause the unit to malfunction. with Part 15 of the FCC Rules. These rules are • To prevent a short circuit when replacing a fuse, designed to provide reasonable protection against first disconnect the wiring harness. harmful interference. This equipment may cause harmful interference to radio communications if it Note is
ページ6に含まれる内容の要旨
Cleaning the Unit Receiver Controls and Features If the unit becomes dirty, turn its power off and wipe 1. POWER Button : Turns Receiver On and Off. it clean with a soft dry cloth. Do not use hard cloths, . Channel Switch (CHAN) & Select Button: paint thinner, alcohol, or other volatile solvents to Navigates through channels & display screens clean the unit. These may cause damage or remove and makes selections of items highlighted on the indicator characters. display. Pressing up
ページ7に含まれる内容の要旨
9. Band Button (P.Tune): Pressing and 1 releasing switches between the five preset banks (A... E), which hold six presets each. Pressing and holding enables “Preset Tune Mode”, which allows for viewing and listening of stored presets with the Channel Switch. 7 10.Remote Control Receiver: Receives 9 8 signals from the included wireless remote 10 control. 11.DC 1V : Input jack for cigarette lighter adapter or 12V DC power supply. 1.FM OUT: FM Output for use with wired FM sw
ページ8に含まれる内容の要旨
Remote Control 1. POWER Button : Turns Receiver ON and OFF. . Channel Buttons: Navigate through channels and display screens. . Category Buttons: Navigate through categories and display screens. 1 . Mute Button: Mutes audio. . DIRECT Button: Accesses channels directly by number. . SELECT (SEL) Button: Selects items highlighted on the display; hold- down to jump to the previously-received Channel. 7. MENU Button: Enters and exits the Setup Mode. 8. MEMORY (
ページ9に含まれる内容の要旨
Activating your SIRIUS Subscription Before you can listen to the Receiver, you must 4. Using the channel up and down buttons, tune the subscribe to SIRIUS Satellite Radio’s service. Receiver to channel 000 to display the Receiver’s unique 12-digit SIRIUS ID number (SID). You can 1. Make sure that the Streamer GT Receiver is also tune to channel 000 by using the remote: properly connected and that its antenna is Press the Select button, then the 0 (zero) button, oriented to receive the S
ページ10に含まれる内容の要旨
Vehicle Installation: Mounting the Receiver 1. Determine where you want to mount the SIR-SL1C Receiver with the Mobile Docking Station: • Do not install the SIR-SL1C Receiver where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays. • Do not install the SIR-SL1C Receiver where it will hinder your access to the vehicle’s controls. • Do not install the SIR-SL1C Receiver where it may hinder the function of safety devices such as an airbag
ページ11に含まれる内容の要旨
• Snap the Clip Mount on to the back of the SIR- Connecting to your Car Stereo SL1C Receiver. 1. If your vehicle stereo has an AUX input, plug a • Slide the SIR-SL1C Receiver with Clip Mount on to the Suction Cup Mount so that the Clip 3.5mm audio cable into the Audio Out connector on the SIR-SL1C. Plug the audio cable’s white (L ch) Mount is securely locked in place. 2. Plug the vehicle power adapter into the SIR- and red (R ch) connectors into your car stereo. SL1C Receiver. Don’t pl
ページ12に含まれる内容の要旨
Vehicle Installation: Mounting the Antenna 1. Temporarily plug the antenna into the 5. Press and hold the POWER button to turn the “ANTENNA” connector on Streamer GT until SIR-SL1C- Receiver on. it is firmly seated. 6. If your SIR-SL1C Receiver has been properly connected and the antenna is receiving the SIRIUS signal you will hear audio. If you do not hear audio and the display shows “Acquiring Signal”, reposition the antenna until the message goes away and you hear audio. (See
ページ13に含まれる内容の要旨
Vehicle Installation: Running the Antenna Cable 1. Turn the SIR-SL1C receiver power OFF and existing cable channels or wiring conduits. remove it from the mount; unplug the Car Power • For SUVs, minivans & 5-door vehicles, bring the Adapter from the cigarette lighter; unplug the cable into the vehicle under the rubber molding for antenna from the Receiver. the tailgate, and continue under the interior trim. 4. From the trunk, route the cable around the passenger compartment and to the back of
ページ14に含まれる内容の要旨
Vehicle Installation: Suction Cup Mounting 2 3 4 1. Clean glass with window cleaner or alcohol pad. 2. Lift cam lever. 3. Press cam lever straight down towards suction cup & glass to flatten suction cup. 4. Lock cam lever. 1 Streamer GT SIR-SL1C User Guide
ページ15に含まれる内容の要旨
Display Button Basic Operation Pressing the DISPLAY button from the Default display After you have successfully activated your SIRIUS toggles channel name and category on the top line of subscription, the Normal Operation (Default) screen will the display. appear (Below): Use the Channel Switch (CHAN) to select channels. Pressing and holding the DISPLAY button for 3 • The selected channel will automatically start playing. The name and artist of the currently seconds will enter Channe
ページ16に含まれる内容の要旨
Search Modes (Category, Channel, Artist, Press one of the Song Title) CATEGORY buttons The Streamer GT Receiver has several ways to search to activate the for and select music: by channel, by category, category list. by artist and by song title. Searching Channels If you want to find a dif ferent channel to listen to, press and hold the DISPLAY button to enter Channel List Press DISPLAY to mode: show the Artist Name 1. Use the CATEGORY buttons to scroll through music and entertainmen
ページ17に含まれる内容の要旨
Direct Tuning (Remote Control Only) Setting Channel Presets Channels can be directly accessed by pressing the You can store up to 30 of your favorite channels as DIRECT button on the remote control and then using presets, for quick access. Presets are stored in 5 banks, the 0-9 keys to enter the desired channel number. each containing 6 channel presets. 1. Press the BAND button to activate the preset bank Once the desired number has been entered, the channel will change and the display will
ページ18に含まれる内容の要旨
Preset Tune List Mode Searching for a Channel Preset (P.TUNE In the Preset Tuning Mode you can view your list of Mode) presets showing Channel Name, Artist Name, or Song It is possible to quickly search through all of your Title just like in the Channel List Mode: presets using the Channel Switch. 1. Press and hold the BAND button to enter the Preset 1. Press and hold the BAND button to enter the Tune Mode (P.TUNE). Preset Tune Mode (P.TUNE). 2. Press the DISP button for 2-seconds which wi
ページ19に含まれる内容の要旨
Memory (MEMO) and Song Seek (S-Seek) Functions: This feature allows the user to capture and store P.TUNE Channel information about the programming (Artist/Song, Name List sports team or traffic city) on the currently tuned Display channel, up to a total of 10 listings. The receiver also has the capability to continuously search all incoming SIRIUS channels and alert the user when a saved program is being played. P.TUNE Artist Storing Song Titles Name List 1. While the Receiver is in t
ページ20に含まれる内容の要旨
If the current tuned channel is an NFL play-by-play This prompt allows you to make the following sports broadcast, pressing the MEMO button will Replace/Cancel choices: allow you to select one of the teams playing to be • By selecting Replace, the memory list will stored in memory. In the future, as long as your appear, and you can use the Channel Switch to select the data that you would like to overwrite receiver is turned on, you will be alerted when your with the new Artist/Song Tit
