ページ1に含まれる内容の要旨
Model PRO-OE4BS
Transmitter Programming Guide
This transmitter makes use of icons (symbols) to identify the reaction your
system will have when any icon (button) is pressed. These icons are
programmed at time of installation to meet the needs of the individual and to
complement the vehicle that the system is installed in. To replace a transmitter
or add transmitters, please follow the programming instructions listed on the
pages of this manual.
RECEIVER
SYSTEM FUNCTION
BUTTON
CHANNEL
Lock and
ページ2に含まれる内容の要旨
Some of the more popular options available for the unused Option Button of your transmitter are: AS 9554 Remote Garage Door Interface AS 9153 Remote window roll up AS 9256 Remote trunk release relay PROGRAMMING TRANSMITTERS: NOTE: It is important to remember that during the programming mode, each individual step must be completed within 15 seconds of the previous step. If the 15 second time limit expires between steps, the unit will automatically exit the program mode. This is indi- cated by
ページ3に含まれる内容の要旨
"Repeat step 4 for each transmitter you wish to program". NOTE: Any button(s) of the transmitter may be used in place of the lock symbol button for channel 1, however using the proper symbol will obviously be less confusing for the consumer. 5) Press and release the valet push-button program switch once to ad- vance to channel 2. The dash mounted LED will Flash 2 times, indicat- ing that the unit is ready to accept programming for the disarm/unlock channel # 2. 6) Press and hold the unlock symb
ページ4に含まれる内容の要旨
NOTE: Certain systems may have additional receiver channels, if your unit exits the program during the next press of the pushbutton switch, your system has 4 channels only, if when you press valet push-button program switch once to advance to channel 5. The dash mounted LED will Flash 5 times, indicating that the unit is ready to accept programming for the 5th channel option. Press and hold any unused button combination as indicated on the front cover of this manual for 4 seconds or until a long
ページ5に含まれる内容の要旨
BATTERY REPLACEMENT: The transmitter incorporates a small LED visible through the case which is used to indicate battery condition. You will notice a decrease in operat- ing range as the battery condition deteriorates. To replace the battery: 1) Remove the small # 0 phillips head screw from the rear of the case. 2) Remove the top cover to access the discharged battery paying atten- tion to the proper polarity orientation. 3) Remove and properly dispose of the discharged battery. 4) Insert
ページ6に含まれる内容の要旨
ORDER FORM FOR 4 BUTTON TRANSMITTER MODEL NO. PRO-OE4BS Important: To help us expedite your order, please print all of the information legibly and mail this form and your payment according to the instructions below. Note: Order PD-40 for Blue transmitter buttons. Order PD-41 for Red transmitter buttons. 1) Pad Number:_____________________________________ 2) Name: __________________________________________ 3) Address: ________________________________________ 4) City: ____________ State: ____ Zip
