ページ1に含まれる内容の要旨
COVER_ENG
User's Manual
Digital Satellite Receiver
KSC-570
ページ2に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 1 mac-4 HP LaserJet 5100 Series T General Safety Warning Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment. Unplug the receiver from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the receiver. Do not use accessories or attachments not recommended by the receiver manufacturer as they may cause problems to the equipment and will void the warranty. Do not place
ページ3に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 2 mac-4 HP LaserJet 5100 Series T General Safety Route power supply cord so that are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to the cords that plugs in the convenience receptacles, and the point where they exit from the unit. Use an outlet that contains surge suppression or ground fault protection. For added protection during a lightning storm, or when the receiver is left unattached an
ページ4に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 3 mac-4 HP LaserJet 5100 Series T DIGITAL SATELLITE RECEIVER OWNER’S MANUAL SIMPLE & SPEEDY OPERATION HANDBOOK Before operation, Please read the entire manual thoroughly and retain it for future reference.
ページ5に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 4 mac-4 HP LaserJet 5100 Series T Channel Search Channel List Edit Channel List Program Guide System Setting Common Interface Utility (Option)
ページ6に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 1 mac-4 HP LaserJet 5100 Series T Contents Remote Control Unit ........................................................................... 3 Front Panel .......................................................................................... 5 Rear Panel .......................................................................................... 6 Connecting Your Equipment ............................................................... 7 Basic Oper
ページ7に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 2 mac-4 HP LaserJet 5100 Series T Contents Menu Transparency ............................................................................ 36 Change PIN Code ............................................................................ 37 Parental Lock ................................................................................. 37 Receiver Lock ...............................................................
ページ8に含まれる内容の要旨
400_RCU_PVR 4/19/06 2:19 PM ˘ ` 3 mac-4 HP LaserJet 5100 Series T Remote Control Unit DIGITAL SATELLITE RECEIVER 3
ページ9に含まれる内容の要旨
400_RCU_PVR 4/19/06 2:19 PM ˘ ` 4 mac-4 HP LaserJet 5100 Series T Remote Control Unit DIGITAL SATELLITE RECEIVER 4
ページ10に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 5 mac-4 HP LaserJet 5100 Series T Front Panel 1. POWER Switch the receiver power “ON” or “OFF”. 2. CH / ( Program / ) Channel Up/Down or select item of sub-menu. … † … † 3. VOL - / + ( Program / ) Volume Up/Down or select item of sub-menu. 4. OK Select a program, a highlighted line or parameter value. 5. EXIT Exit from parameter and cancel selected function. 6. MENU To see main menu. 7. SEG. DISP. 4-digit 7-segment display channel information. 8. CAM S
ページ11に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 6 mac-4 HP LaserJet 5100 Series T Rear Panel 1. POWER SUPPLY 90 ~ 250V AC, 50/60Hz. 2. S/PDIF Output for connection to a digital amplifier. 3. SCART FOR VCR Connect this port to the VCR via SCART cable. 4. SCART FOR TV Connect this port to the TV via SCART cable. 5. VIDEO Video connection port to the TV or other equipment. 6. AUDIO Audio connection port to the TV or other equipment. 7. 0/12V To connect 12V to an external 0/12V switch. 8. TV OUT To co
ページ12に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 7 mac-4 HP LaserJet 5100 Series T Connecting Your Equipment How to connect your STB to various systems There are several ways of connecting the STB to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local supplier for assistance in setting-up your system that is best suited to your requirements. 1. Connect STB to a TV set Connect your STB to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V, TV out (UHF) or S/Video
ページ13に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 8 mac-4 HP LaserJet 5100 Series T Connecting Your Equipment 4. Connect STB to a Digital Audio System If you have a DAC with S/PDIF coaxial cable input, you can connect the STB with it to enjoy higher quality sound. Connect S/PDIF coaxial cable to a digital amplifier. 5. Loop Through If you have another analogue or digital STB and you wish to use the same LNB then you can connect it via the loop through. Connect one end of the coaxial cable to the Loo
ページ14に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 9 mac-4 HP LaserJet 5100 Series T Connecting Your Equipment TV with Terrestrial Antenna 1. Connect one end of RCA/Cinch cable to the RCA/Cinch jack on the back of the STB and the other end to a RCA/Cinch jack on your TV. If your TV doesn’t have a RCA/Cinch jack, connect one end of RF cable to the TV OUT on the back of the STB and the other end to a RF input jack on your TV. (To RCA/Cinch on your TV) 2. Connect one end of RF cable to the ANT IN on
ページ15に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘ ` 10 mac-4 HP LaserJet 5100 Series T Connecting Your Equipment Reference 1. DiSEqC 1.0 Connection All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible. This allows multiple antennas to be connected to the STB at the same time. If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1.0 switch. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. Do the same
ページ16に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 11 mac-4 HP LaserJet 5100 Series T Connecting Your Equipment Front Panel Display Message KEY & DISPLAY The message of the 7-segment LED (Light-Emitting Diode) on the STB and keys are explained as below. Standby Mode Current Program Number on TV List System Booting Current Program Number on Radio Location Power Off TV Mode MICOM Version STB Mode Boot Loader Version Upgrade Download Upgrade Procedure Down Load Procedure Upgrade Complete DIGITAL SATELLIT
ページ17に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 12 mac-4 HP LaserJet 5100 Series T Basic Operation Basic Function 1. Program Information After the television channels have been programmed, you will see the information box each time you change the channels. 1. Every time you change channels you will receive program information for a few seconds. (In the “Banner Time” menu you can select how long this information will be shown.) 2. You may change channel lists with the UP or DOWN button. You can ge
ページ18に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 13 mac-4 HP LaserJet 5100 Series T Basic Operation Basic Function 4. Next-Information Banner 1. During “Channel Banner” is appearing, when you press YELLOW Button, you can get “Next-Information Banner” 2. Using “Next-Information Banner”, you can get a simple EPG of “Next-Information”. 5. Channel-Information Banner 1. During “Channel Banner” is appearing, when you press INFO(BLUE) Button, you can get “Channel-Information Banner”. 2. Using “Chan
ページ19に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 14 mac-4 HP LaserJet 5100 Series T Basic Operation Basic Function 7. Teletext / Subtitle 1. Press the RED button, popup window will be displayed on the screen. 2. Select the off, then subtitle function is off. 3. Select the Subtitle, then you can see the Subtitle language. 4. Select the Teletext, then you can see the Teletext language. 8. Timer The user can reserve a desired program at a desired time by using the Timer function. 1. Once,
ページ20に含まれる内容の要旨
k1.5 500 SAT(Eng) 1/5/06 5:53 PM ˘ ` 15 mac-4 HP LaserJet 5100 Series T Basic Operation Basic Function 9. Simple Channel List OK 1. When you press OK() button during receiving service stream, you can get “Channel List” view. 2. Using UP/DOWN() buttons in “Channel List” view, you can choose another channel. OK 3. After moving highlight on a channel, then press OK() button. 4. Press RED button to change channel listing. 5. To get the channel sort list, press the GREEN button. Pop up wi
