ページ1に含まれる内容の要旨
OPERATOR'S MANUAL
Model RT100 Router Table
Double Insulated
(For use only with the Ryobi R161 router)
THANK YOU FOR BUYING A RYOBI ROUTER TABLE
Your new router table has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new router table.
Pay close attention to the Rules f
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Table of Contents and Introduction .............................................................................................................. 2 Rules for Safe Operation .......................................................................................................................... 3-4 Symbols ....................................................................................................................................................... 5 Features....
ページ3に含まれる内容の要旨
RULES FOR SAFE OPERATION READ ALL INSTRUCTIONS Protect your lungs. Wear a face or dust mask if the cut- ting operation is dusty. Know your power tool. Safe operation of this power tool requires that you read and understand this operator’s Protect your hearing. Wear hearing protection during manual, the Operator’s Manual for the R161 router and extended periods of operation. all labels affixed to the tool. Learn the applications and Secure the work. Use clamps or a vise to hold the work l
ページ4に含まれる内容の要旨
RULES FOR SAFE OPERATION Keep tool dry, clean, and free from oil and grease. WARNING: Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents Some dust created by power sanding, sawing, grinding, to clean tool. drilling, and other construction activities contains Stay alert. Never operate a power tool when tired or chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these while under
ページ5に含まれる内容の要旨
SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs. DANGE
ページ6に含まれる内容の要旨
FEATURES KNOW YOUR ROUTER TABLE GUARD/DUST COVER See Figure 1. Provides a barrier to protect the operator from careless con- Before attempting to use your router table, familiarize yourself tact with the cutter. The guard/dust cover is adjustable for all with all operating features and safety requirements. types of cuts and materials. LOWER GUARDS WARNING: Ensures that your hand, loose clothing, and other objects do not come in contact with the cutter or collet during operation. If any parts are
ページ7に含まれる内容の要旨
UNPACKING Before assembling your router table check to see that all parts listed are included. See Figure 2. Inspect it carefully WARNING: to make sure no breakage or damage has occurred during To prevent accidental starting or electrical shock that shipping. If any parts are damaged or missing, call 1-800- could cause possible serious personal injury, assemble 525-2579 for your nearest RYOBI AUTHORIZED SERVICE all parts to your router table before connecting it to power CENTER to obtain replace
ページ8に含まれる内容の要旨
ASSEMBLY Locate the two square nuts and two fence lock knobs. WARNING: Position a square nut inside the channel located underneath the table. Insert the lock knob through the hole in the fence Your router or router table should never be connected to assembly and screw it into the square nut below. See Figures power supply when you are assembling parts, making 7a and 7b. Repeat for the other side. adjustments, installing or removing cutters, cleaning, or when not in use. Disconnecting your rout
ページ9に含まれる内容の要旨
ASSEMBLY GUARD/DUST COVER ASSEMBLY Securely screw guard post into threaded hole located on the fence assembly. Loosen knob on clear plastic guard/ dust cover and slide guard/dust cover down over guard post. See Figures 8a and 8b. Make sure guard/dust cover is centered over the throat of the router table and retighten knob. If desired, insert a standard 2-1/4 in. vacuum hose in the top of guard/dust cover. VIEW FROM ABOVE TABLE Fig. 7a MITER GAUGE ASSEMBLY Assemble miter gauge and miter gau
ページ10に含まれる内容の要旨
OPERATION WARNING: WARNING: Your router or router table should never be connected to Never operate the router table unless both lower guards a power supply when you are assembling parts, making are securely in place. Failure to do so could allow loose adjustments, installing or removing cutters, or when not clothing, cords and hands to come in contact with the in use. Disconnecting your router and router table will spindle while in operation and could result in serious per- prevent accidental s
ページ11に含まれる内容の要旨
OPERATION POSITION THE FENCE OR MITER GAUGE For any router operation, you will use either the fence or the miter gauge to help guide your work through the cutter. To position the fence: Loosen the fence lock knobs by turning them counterclockwise. Loosen the fence lock knobs just enough so that the fence moves freely. Position the fence the proper distance from the cutter based on the amount of material you plan to remove. Tighten the Fig. 11 fence lock knobs. To position the miter
ページ12に含まれる内容の要旨
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most When servicing, use only identical Ryobi replacement plastics are susceptible to damage from various types of parts. Use of any other parts may create a hazard or cause commercial solvents and may be damaged by their use. product damage. Use clean cloths to remove dirt, carbon dust, etc. Periodically check all clamps, nuts, bolts and screws for tightness and condition. Make sure that the throat pl
ページ13に含まれる内容の要旨
NOTES Page 13
ページ14に含まれる内容の要旨
OPERATOR'S MANUAL Model RT100 Router Table Double Insulated (For use only with the Ryobi R161 router) **Ampere rating EXTENSION CORD CAUTION (on tool data plate) 0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0 Make sure your extension cord is in good condition. When us- Cord Length Wire Size (A.W.G.) ing a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle 25' 16 16 16 16 14 14 the current the tool will draw. An under
