Cisco Systems Cisco 1711の取扱説明書

デバイスCisco Systems Cisco 1711の取扱説明書

デバイス: Cisco Systems Cisco 1711
カテゴリ: ルーター
メーカー: Cisco Systems
サイズ: 0.57 MB
追加した日付: 8/28/2013
ページ数: 20
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスCisco Systems Cisco 1711の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Cisco Systems Cisco 1711に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Cisco Systems Cisco 1711をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Cisco Systems Cisco 1711のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Cisco Systems Cisco 1711の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Cisco Systems Cisco 1711 取扱説明書 - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Cisco Systems Cisco 1711を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Cisco Systems Cisco 1711の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨


CHAPTER 2
Installation
This chapter provides procedures for installing the Cisco 1711 and Cisco 1712
Security Access routers and includes the following sections:
• Before Installing the Router
� Connecting the Router to Your Local Network
� Connecting the Router to Your Service Provider’s Equipment
� Connecting Networked Devices to the Router’s Switch Ports
� Connecting Power to the Router
� Verifying Your Installation
� Optional Installation Steps
Before Installing the Router
The Cisco 1711

ページ2に含まれる内容の要旨

Chapter 2 Installation Connecting the Router to Your Local Network Warning Read the installation instructions before you connect the system to its power source. Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Caution Do not place anything on top of the router that weighs more than 10 pounds (4.5 kg). Excessive weight on top of the router could damage the chassis. Connecting the Router to Your Local Network The Cisco 1711 and Cisc

ページ3に含まれる内容の要旨

Chapter 2 Installation Connecting the Router to Your Local Network The Cisco 1711 Security Access router is a fixed configuration router that includes a 1-port analog modem card (WIC-1-AM) that is installed in the WAN interface card (WIC) slot 1. The Cisco 1712 Security Access router is a fixed configuration router that includes a 1-port Integrated Services Digital Network Basic Rate Interface (ISDN-BRI) S/T interface card (WIC-1B-S/T) that is installed in WIC slot 1. Both the Cisco

ページ4に含まれる内容の要旨

3x 2x 1x ACT LNK 4x ACT LNK ACT LNK ACT LNK CONSOLE BRI S/T SEE MANUAL BEFORE INSTALLATION Cisco 1712 FDX 100 LINK MODOK WIC1OK WIC0OK +5, +12, -12 VDC 10/100 ETHERNET AUX AUI WIC 4ESW 8 7 6 5 4 3 2 1 Chapter 2 Installation Connecting the Router to Your Local Network Figure 2-1 Connecting the Router to the Local Network WIC-1-AM SP SEE MANUAL CN Modem BEFORE OH WIC-1AM INSTALLATION PHONE LINE 0 or 10/100 Ethernet port BRI S/T SEE MANUAL BEFORE INSTALLAT

ページ5に含まれる内容の要旨

ACT L 4x NK ACT L 3x NK ACT L 2x NK ACT L 1x NK CONSOLE BRI S/T SEE MANUAL BEFORE INSTALLATION MODOK WIC1OK Cisco 1712 WIC0OK FDX 100 LINK +5, +12, -12 VDC 10/100 ETHERNET AUX WIC 4ESW 1 2 Chapter 2 Installation Connecting the Router to Your Service Provider’s Equipment Connecting the Router to Your Service Provider’s Equipment You can also connect the Cisco 1711 or Cisco 1712 Security Access router to your service provider’s broadband (xDSL or cable) m

ページ6に含まれる内容の要旨

ACT L 4x NK ACT L 3x NK ACT L 2x NK ACT L 1x NK CONSOLE BRI S/T SEE MANUAL BEFORE INSTALLATION Cisco 1712 FDX 100 LINK MODOK WIC1OK WIC0OK +5, +12, -12 VDC AUX WIC 4ESW 1 2 3 4 5 6 Chapter 2 Installation Connecting Networked Devices to the Router’s Switch Ports Step 2 Connect the other end of the cable to a network port on your service provider’s broadband (xDSL or cable) modem equipment. Connecting Networked Devices to the Router’s Switch Ports The Cis

ページ7に含まれる内容の要旨

Chapter 2 Installation Connecting Power to the Router Step 2 Connect the other end of the cable to a port on the hub, switch, or the Ethernet port on your computer. Note The example provided in Figure 2-3 on page 2-6 shows connectivity to a hub. The router’s Ethernet switch port can be connected to other networked devices, such as a switch or computer with a NIC. If you are connecting the router’s switch port to another switch, use a crossover cable. Note If you are connecting a com

ページ8に含まれる内容の要旨

Chapter 2 Installation Connecting Power to the Router Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120VAC, 15AU.S. (240VAC, 16A international) is used on the phase conductors (all current-carrying conductors). Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Follow these steps to connect power to the rout

ページ9に含まれる内容の要旨

ACT LNK 4x ACT LNK 3x ACT LNK 2x ACT LNK 1x CONSOLE BRI S/T SEE MANUAL BEFORE INSTALLATION MODOK Cisco 1701 WIC0OK FDX 100 LINK WIC1OK 10/100 ETHERNET AUX +5, +12, -12 VDC 4 WIC ESW Chapter 2 Installation Connecting Power to the Router Figure 2-4 Connecting the Power Supply Separate Power socket power cord WIC-1-AM SP SEE CN MANUAL Modem BEFORE Power supply OH WIC-1AM INSTALLATION PHONE LINE 0 Attached or power supply cord BRI S/T SEE MANUAL BEFORE INST

ページ10に含まれる内容の要旨

Chapter 2 Installation Verifying Your Installation Verifying Your Installation You can verify that you have correctly installed the router by checking the following LEDs: � PWR (front panel)—On when power is being supplied to the router. � OK (front panel)—On when the router software is loaded and functional. Blinking means that the router is performing a power-on self-test (POST). � WIC0/WIC1 OK (back panel)—On when a WIC is correctly installed in the corresponding WIC slot. � ETH AC

ページ11に含まれる内容の要旨

Chapter 2 Installation Optional Installation Steps Connecting a PC to the Router’s Console Port If you want to configure the router by using the Cisco IOS command-line interface, you must connect the router console port to a terminal or PC. The cable and adapter required for this connection are included with the router. To configure the router by using a PC, the PC must have some type of terminal emulation software installed. The software should be configured with the following param

ページ12に含まれる内容の要旨

3x 2x 1x ACT LNK 4x ACT LNK ACT LNK ACT LNK CONSOLE BRI S/T SEE MANUAL BEFORE INSTALLATION Cisco 1701 WIC0OK FDX 100 LINK MODOK WIC1OK +5, +12, -12 VDC 10/100 ETHERNET AUX WIC 4ESW Chapter 2 Installation Optional Installation Steps Figure 2-5 Connecting the Console Cable to the Router WIC-1-AM SP SEE CN MANUAL Blue console cable Console port Modem BEFORE OH WIC-1AM INSTALLATION PHONE LINE 0 or BRI S/T SEE MANUAL BEFORE INSTALLATION WIC-1B-S/T To PC or t

ページ13に含まれる内容の要旨

ACT LNK 4x ACT LNK 3x ACT LN 2x K ACT LN 1x K CONSOLE BRI S/T SEE MANUAL BEFORE INSTALLATION Cisco 17xx WIC0OK FDX 100 LINK MODOK WIC1OK +5, +12, -12 VDC 10/100 ETHERNET AUX WIC 4ESW Chapter 2 Installation Optional Installation Steps Note An external modem is not required for use on the Cisco 1711 Security Access router WIC-1-AM card. Follow these steps to connect a modem to the router, using the console cable: Step 1 Connect the RJ-45 end of the cable

ページ14に含まれる内容の要旨

Chapter 2 Installation Optional Installation Steps Step 2 Connect the DB-9 end of the cable to the DB-9 end of the DB-9-to-DB-25 adapter. Step 3 Connect the DB-25 end of the adapter to the modem. Wall-Mounting The Cisco 1711 and Cisco 1712 Security Access routers can be wall-mounted using two number six, 3/4-inch screws and the molded mounting brackets on the bottom of the hub, as shown in Figure 2-7. You must provide the screws. We recommend using pan-head or round-head screws. Figur

ページ15に含まれる内容の要旨

Chapter 2 Installation Optional Installation Steps Step 2 Hang the router on the screws with either the left side or right side mounting brackets so that � The LEDs are visible to the user—Because the LEDs indicate the router operating status, they need to be easily visible. � The power supply does not hang from its cable—If the power supply is not supported, it might disconnect from the cable that connects it to the router. Caution If you install the screws in drywall, use hollow-wal

ページ16に含まれる内容の要旨

Chapter 2 Installation Optional Installation Steps Figure 2-8 Assembling Stacking Clip and Fastener Push plastic fastener through small hole at the end of the stacking clip. After assembling the clip and fastener, follow these steps to stack the router with another device: Step 1 Place the clip on top of the lower device, as shown in Figure 2-9 on page 2-17. Slide the clip forward so that the front tabs slide into the vent slots. Make sure that the rear hooks fit over the edge of the

ページ17に含まれる内容の要旨

ACT L 4x NK ACT L 3x NK ACT L 2x NK ACT L 1x NK CONSOLE Cisco 17xx WIC0OK FDX 100 LINK MOD OK WIC1OK +5, +12, -12 VDC 10/100 ETHERNET AUX SPEED LED 1 2 3 4 100BaseTX SOLID 5 6 7 8 10BaseT BLINK 5X 6X 7X 8X MDI MDI-X WIC 4ESW Chapter 2 Installation Optional Installation Steps Figure 2-9 Stacking the Router Bottom of router Front tabs Plastic fastener Rear Back panel of hooks lower hub Rear hooks WIC-1-AM SP SEE MANUAL CN Modem BEFORE OH WIC-1AM INSTALLA

ページ18に含まれる内容の要旨

ACT LN 4x K ACT LN 3x K ACT LN 2x K ACT LN 1x K CONSOLE Cisco 17xx WIC0OK FDX 100 LINK MOD OK WIC1OK +5, +12, -12 VDC 10 10/100 ETHERNET /100 ETHERNET AUX SPEED LED 1 2 3 4 100BaseTX SOLID 5 6 7 8 10BaseT BLINK 5X 6X 7X 8X MDI MDI-X WIC 4ESW Chapter 2 Installation Optional Installation Steps Unstacking the Router Follow these steps to unstack the router from another device: Step 1 Press up on the tab over the center of the lower device to release the c

ページ19に含まれる内容の要旨

Chapter 2 Installation Optional Installation Steps Step 2 Slide the clip and router toward you. Step 3 Use both hands to lift the router and the stacking clip off the lower device. Afterward, remove the clip from the bottom of the router. Cisco 1711 and Cisco 1712 Security Access Routers Hardware Installation Guide OL-4050-02 2-19

ページ20に含まれる内容の要旨

Chapter 2 Installation Optional Installation Steps Cisco 1711 and Cisco 1712 Security Access Routers Hardware Installation Guide OL-4050-02 2-20


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Cisco Systems 4000 取扱説明書 ルーター 16
2 Cisco Systems 1750 取扱説明書 ルーター 8
3 Cisco Systems 4034441 取扱説明書 ルーター 6
4 Cisco Systems 700 series 取扱説明書 ルーター 2
5 Cisco Systems 850 取扱説明書 ルーター 37
6 Cisco Systems 903 取扱説明書 ルーター 1
7 Cisco Systems 870 取扱説明書 ルーター 57
8 Cisco Systems 12000/10700 V3.1.1 取扱説明書 ルーター 0
9 Cisco Systems 2654T6 取扱説明書 ルーター 0
10 Cisco Systems 901 取扱説明書 ルーター 0
11 Cisco Systems A9014CFD 取扱説明書 ルーター 0
12 Cisco Systems Asr 90019001 取扱説明書 ルーター 12
13 Cisco Systems ASR 1004 取扱説明書 ルーター 25
14 Cisco Systems Asr 9001ASR9001 取扱説明書 ルーター 26
15 Cisco Systems Cisco 2901 Integrated ServicesCISCO2901VK9 取扱説明書 ルーター 225
16 Edelbrock 1801 取扱説明書 ルーター 4
17 Sony LF-V30 取扱説明書 ルーター 19
18 3Com 3C13840 取扱説明書 ルーター 0
19 3Com 3C13880 取扱説明書 ルーター 1
20 Agilent Technologies E6385A 取扱説明書 ルーター 2