ページ1に含まれる内容の要旨
Quick Start Guide
Cisco 1811 and 1812 Integrated Services Router Cabling and
Installation
INCLUDING LICENSE AND WARRANTY
1 Cisco One-Year Limited Hardware Warranty Terms
2 Overview
3 Unpacking the Box
4 Connecting the Router
5 Connecting Antennas to the Router RP-TNC Connectors
6 Configuring the Router Using Cisco Router and Security Device Manager
7 Connecting a PC to the Router Console Port
8 Verifying Your Installation
9 Obtaining Documentation
10 Cisco Product Security Overview
11 Obtaini
ページ2に含まれる内容の要旨
1 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranty applicable to Cisco software, is included on the CD that accompanies your Cisco product. Follow these steps to access and download the Cisco Information Packet and your warranty document from the CD or from Cisco.com. 1. Launch your browser, and go to this URL: h
ページ3に含まれる内容の要旨
Complete the information below, and keep it for reference. Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number 2 Overview This document describes the steps for installing the Cisco 1811 and the Cisco 1812 integrated services routers. The Cisco 1811 and Cisco 1812 routers are fixed-configuration routers. They each include an integrated 8-port 10/100-Mbps Ethernet switch, two onboard Fast Ethernet WAN ports, two dual
ページ4に含まれる内容の要旨
Other Documentation Quick Start Guide CD-ROM Figure 1 Items Included with the Cisco 1811 and Cisco 1812 Integrated Services Router 1 4 2 5 3 6 1 Cisco 1811 or Cisco 1812 router 4 PoE power supply and cable (optional) 2 Power cable 5 DB-9 to DB-25 adapter 3 Console cable (light blue, RJ-45 to DB-9) 6 Product documentation The shipment should include the following items: • One Cisco 1811 router or one Cisco 1812 router One blue RJ-45-to-DB-9 console cable One DB-9-to-DB-25 adapter One blac
ページ5に含まれる内容の要旨
4 Connecting the Router Figure 2 shows a typical installation of a Cisco 1811 or Cisco 1812 router. Figure 2 Typical Installation of a Cisco 1811 or Cisco 1812 Router 1 2 5 Ethernet Hub 3 Internet Service 4 Provider DSL/Cable Modem PC Follow these steps to connect the router to the power supply, your local network, and your service provider network: Step 1 Connect power to the router as shown in Figure 2: a. Connect the separate power cord to the power socket on the back panel of the router.
ページ6に含まれる内容の要旨
Step 3 To use Cisco Router and Security Device Manager (SDM) to configure your router, you must connect a PC to the first Ethernet switch port. Connect one end of an Ethernet cable to one of the Ethernet switch ports (FE 2–FE 9), and connect the other end to the Ethernet port on your PC. Caution Always connect the Ethernet cable to an Ethernet port on the router. Accidentally connecting the cable to the wrong port can damage your router. Step 4 To connect the router to your service provider
ページ7に含まれる内容の要旨
Figure 3 Connecting Antennas to the Router For information about configuring the wireless LAN functionality of your router, see the Cisco Access Router Wireless Configuration Guide at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800fix/awg/index.htm 6 Configuring the Router Using Cisco Router and Security Device Manager Cisco Router and Security Device Manager (SDM) is a web-based configuration tool that allows you to configure LAN and WAN interfaces, r
ページ8に含まれる内容の要旨
Follow these steps to connect the router to a terminal or PC: Step 1 Connect the RJ-45 end of the console cable to the CONSOLE port on the back panel of the router, as shown in Figure 4. Figure 4 Connecting the Console Cable to the Router To PC or Terminal 1 Step 2 Connect the DB-9 end of the console cable to the console port (also called the serial port) on your PC. If this adapter does not fit your PC console port, you must provide an adapter that fits. 8 Verifying Your Installation You ca
ページ9に含まれる内容の要旨
Table 1 LEDs That Verify Installation (Continued) LED Meaning PPP Steady green—At least one PPP connection established. Off—No PPP link established. VPN Steady green—At least one VPN tunnel established. Off—No VPN tunnel established. CF Blinking green—CompactFlash memory being accessed. Do not remove CompactFlash memory. Off—CompactFlash memory is not being accessed. It is safe to remove CompactFlash memory. 1. Inline power is a field-upgradable option only. It is not installed by default. 2.
ページ10に含まれる内容の要旨
Ordering Documentation You can find instructions for ordering documentation at this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm You can order Cisco documentation in these ways: Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool: http://www.cisco.com/en/US/partner/ordering/ Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarter
ページ11に含まれる内容の要旨
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you send to Cisco. PSIRT can work from encrypted information that is compatible with PGP versions 2.x through 8.x. Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one that has the most recent creation date in this public key server list: http://pgp.mit.edu:11371/pks/lookup?search=psirt%40cisco.com&op=
ページ12に含まれる内容の要旨
To open a service request by telephone, use one of the following numbers: Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227) EMEA: +32 2 704 55 55 USA: 1 800 553-2447 For a complete list of Cisco TAC contacts, go to this URL: http://www.cisco.com/techsupport/contacts Definitions of Service Request Severity To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1)—Your network is “down,” or there is a critical impact
ページ13に含まれる内容の要旨
13
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
15
ページ16に含まれる内容の要旨
16
ページ17に含まれる内容の要旨
Corporate Headquarters European Headquarters Americas Headquarters Asia Pacific Headquarters Cisco Systems, Inc. Cisco Systems International BV Cisco Systems, Inc. Cisco Systems, Inc. 170 West Tasman Drive Haarlerbergpark 170 West Tasman Drive 168 Robinson Road San Jose, CA 95134-1706 Haarlerbergweg 13-19 San Jose, CA 95134-1706 #28-01 Capital Tower USA 1101 CH Amsterdam USA Singapore 068912 www.cisco.com The Netherlands www.cisco.com www.cisco.com Tel: 408 526-4000 www-europe.cisco.com Tel: 4
ページ18に含まれる内容の要旨
18
