ページ1に含まれる内容の要旨
TWO-WA Y LCD AUTO MATIC/MANUAL
TR AN SMISSION R E MOTE STARTER
WITH FULL AL AR M SY STEM
AS-6850vTW-FM
User Guide
WARNING
It is the responsibility of the vehicle operator to ensure their vehicle
is parked in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
ページ2に含まれる内容の要旨
Table of Contents Secure Lock ...................................................... 14 Introduction ............................................................ 2 Remote Trunk Release..................................... 14 Vehicle Presets....................................................... 2 The Starter Kill and Anti-grind Feature............. 14 Heater & Heated Seats....................................... 2 Safe Start Mode................................................ 14 Winds
ページ3に含まれる内容の要旨
Using the Transmitter Your remote starter is equipped with a 6-button, multi-channel, 2-way remote control. It can operate two independent vehicles equipped with identical remote starters (see Multi-car operation section on page 17). LCD Remote Functions The transmitter offers several command-confirmation and timer features. This section explains some of the key functions available. The next section gives a summary of the button combinations used to access the functions. Note: If you w
ページ4に含まれる内容の要旨
Backlight: Press and hold the button (for more than 3 seconds and less than 5 seconds), to turn the Backlight ON for 3 seconds. If the button is pressed down for more than 5 seconds, the backlight will stay ON until the button is released. A quick way to access the backlight is to press the button quickly (for less than 1 second); the backlight will turn on until the MENU operation ends. Backlight Button Press for < 1 second Backlight ON until MENU operation ends. Press for > 3
ページ5に含まれる内容の要旨
TEMP STOP Side Button PANIC Programming CWM AUX 6 Language Menu LANGU ENG Language Or English is default. FRAN 7 Temperature Menu TEMP CTEMP Deg. Celsius or Fahrenheit Temperature Or Deg. Celsius is default. FTEMP 8 Clock Menu CLOCK 12:00 Adjusts clock hour Clock hours 12 is flashing (value from 0 to 12). 12:00 Adjusts clock minute Clock minutes 00 is flashing (value from 0 to 59). Confirmation Mode 9 CONFM Menu BZVIB Buzzer or Vibration option. Confirmatio
ページ6に含まれる内容の要旨
15 Alarm Clock Menu ALARM A 12:00 Adjusts alarm hour Alarm hours 12 is flashing (value from 0 to 12). A 12:00 Adjusts alarm minute Alarm minutes 00 is flashing (value from 0 to 59). A – ON + Toggle alarm Or Enables or disables alarm. A – OFF Parking Countdown This version of the countdown feature is particularly useful for keeping track of parking meter time: The user may quickly set up the countdown using the Parking Menu. The transmitter will beep once, 5 min. before the Par
ページ7に含まれる内容の要旨
Button Operation: Button LCD Sound Lock button 1 beep + LOCK Unlock button 2 beeps + UNLOCK Trunk button TRUNK text for 1 sec. 1 beep Start button START text for 1 sec., + backlight user selected for 2 sec. 1 beep Engine running 3 beeps run time + icon + blue backlight for 3 sec. Engine stop red backlight on for 3 sec. 2 beeps TEMP - displays temperature + backlight user selected for 3 sec. 1 beep STOP - transmits Engine stop code AUX Button PANIC - transmits PANIC Mode code
ページ8に含まれる内容の要旨
Setting Your Vehicle Into Ready Mode If your vehicle has a manual transmission you must read the following indications. In order to start the vehicle by remote, the unit must first be set to Ready Mode. If the unit is not set to Ready Mode, it cannot remote start the vehicle. Please note that Ready Mode can be enabled by the remote or the handbrake, depending on the option that was selected by your installer. Therefore, you must follow the appropriate procedure between the two described b
ページ9に含まれる内容の要旨
Arming the Starter Kill The Starter Kill (if installed) can be configured by the installer so as to arm automatically (passive mode) or not to arm automatically (active mode). • To disarm the Starter Kill, press the button on the transmitter. The parking lights will flash twice. If remote door locks are installed, this will also unlock the doors. • To arm the Starter Kill, press the button on the transmitter. The parking lights will flash once. If remote door loc
ページ10に含まれる内容の要旨
To leave the vehicle in Idle Mode if your vehicle has an automatic transmission: 1. With the engine running, make sure to release the brake pedal and press the or button (to unlock the doors) or the button on the remote control until the parking lights come on or you hear a series of clicks. 2. Remove the key and exit the vehicle. The engine will continue running. 3. Lock the doors if needed. The engine will continue running until the user re-enters the vehicle or until
ページ11に含まれる内容の要旨
2- Getting into Combo Valet Mode using combined buttons on the transmitter: • Hold the and buttons simultaneously for 3 seconds. • The parking lights will flash 3 times and the LED on the antenna will remain ON solid. • The icon will appear on your LCD remote. 2- Getting out of Valet Mode using combined buttons on the transmitter: • Hold the and buttons simultaneously for 3 seconds. • The parking lights will flash 2 times and the LED on the antenna will turn OFF. • T
ページ12に含まれる内容の要旨
• The parking lights will flash 2 times and the LED on the antenna will turn OFF. • The icon will disappear on your LCD remote. Valet Alarm Mode This feature will allow you to put your system into Valet Alarm Mode by using the transmitter. Getting into Valet Alarm Mode • Press the button to go to the MENU. • Press or to go to the VALET MENU. • Press to go to the next stage MENU; press or to choose the VLTAM (VALET ALARM) Mode. • Press to go to the
ページ13に含まれる内容の要旨
To exit Cold Weather Mode, do any one of the following actions: • Open the hood. • Start the engine by remote. • Turn the key to the IGNITION ON (RUN) position. • Press and release the button and you will hear a beep; L-01 will appear on the display. Press the button for 3 seconds (the parking lights will flash once). When the system exits Cold Weather Mode, the remote control will beep once and the icon will disappear. To verify whether the system is in Cold Weather Mode: • Press
ページ14に含まれる内容の要旨
Ignition-Controlled Door Locks This is an added security feature. If your remote starter was installed with the ignition-controlled door locks option, the doors will automatically lock as soon as the key is turned to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also lock any door that was unlocked and opened (then closed) the next time the break pedal is pressed. When the key is turned to the OFF position, the doors will automatically unlock. Rel
ページ15に含まれる内容の要旨
How to Access Safe Start Mode Function By pressing Icon Sound Instructions / description Press twice within 3 Start on Safe Melody x 2 seconds. Press for 1 sec- Start Mode melody-then press 1 sec. Stop on Safe None Melody Start Mode Installer-programmable Valet Modes Valet Mode Using the Valet Switch (if installed) When your vehicle is in Valet Mode, the remote starter functions are disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will pr
ページ16に含まれる内容の要旨
How to Access Home Valet Mode Function By pressing Icon Sound Instructions / description Step 1 : or Press or . Within 5 seconds, press To enter Home Valet 1 beep Step 2 : + + . . The transmitter will display Mode simultaneously within 5 sec. and there will be 1 beep. To exit Home Insert key in ignition switch and turn to the ON None None None Valet Mode position. The icon will disappear. Turbo
ページ17に含まれる内容の要旨
How to Access Run Time Status (Indications purposes only) Function By pressing Icon Gasoline Diesel 3 minutes 8 minutes Engine runtime 15 minutes 20 minutes 25 minutes 30 minutes Temperature Request (If ACC-Temp-101 installed) The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp- 101) is installed: • Press the button for 1 second and release; you will hear a beep. L-01 will appear on the screen. • Immediately press the button and hold
ページ18に含まれる内容の要旨
LCD Transmitter Operation and Confirmation (Second Car Control) Basic Operations Function Button press Icon Sound Lock 1 beep + Unlock 2 beeps + Start 3 beeps Run time + + Stop none 2 beeps + Trunk 1 beep flashing 1 sec. Start/Stop While in Safe Start Mode Function Button press Icon Sound Description Press + simultaneously twice within 3 seconds. Press for 1 Start on Safe 3 beeps second - a b
ページ19に含まれる内容の要旨
: customized feature 3 : customized feature 4 Accessing the Multi-Level Features and Other Transmitter Functions • To access a Level 1 feature, press and release the button and you will hear a “beep”; L-01 will be displayed. This display means that you are now in Level 1. Simply press the corresponding button to access the desired feature. • To access a Level 2 feature, press and release the button and you will hear a “beep’’; L-02 will be displayed. This display
ページ20に含まれる内容の要旨
Troubleshooting Transmitting Range Many factors may affect the operating range of the transmitter. Some of these are: • The condition of the battery in the transmitter. • The operating environment (for example: downtown radio-frequency noise, airports, cellular phone towers…) • Metal: any type of metal will affect operating range. This includes the vehicle itself. • The shape of the vehicle can affect range as well (vans in general have less range). • The shape of the roof and A-pillars
