ページ1に含まれる内容の要旨
1
Remote Vehicle Control System
TM
PC 7400
Owner's Manual
Keyless Entry & Remote
Start System
IMPORTANT NOTE: The operation of the Power Code as described in this
manual is applicable to most vehicles. However, due to the engine type
and configuration of some vehicles (i.e. diesel engines), some functions
AND/OR SAFETY PRECAUTIONS may not apply. Please see your 101515-5
installing dealer for more information.
ページ2に含まれる内容の要旨
2 Table of Contents TM Features and Benefits of the PowerCode PC 7400 ..................... 3 Using Your Remote Transmitter .............................................. 4 Locking the Vehicle Starter Disable Unlocking the Vehicle Two-Stage Door Unlock Activating the Trunk Release Feature Turning on the Vehicle Headlights Using the Car Finder Feature Personal Protection Alarm (Panic) Remote Start / Stop Feature Using Your Remote Starter ...................................................... 6 St
ページ3に含まれる内容の要旨
TM 3 Features and Benefits of the PowerCode PC 7400 Two Easy-to-Use Weather-Resistant Remote Controls TM The remote controls included with the PowerCode PC 7400 utilize durable, moisture resistant cases and sealed rubber buttons for reliability and long life. Rolling code technology prevents the transmitter signals from being duplicated. The button functions are TM clearly labeled to make the PowerCode PC 7400 simple to operate. Starter Disable TM The PowerCode PC 7400 protects your vehicle
ページ4に含まれる内容の要旨
4 Using Your Remote Transmitter Press to LOCK the Vehicle Doors* Press and hold to turn on headlights Press for Car Finder Press to UNLOCK Press and Hold for Vehicle Doors Panic Alarm Press and Hold to open trunk Press for two-car Press LOCK then operation (SHIFT) Press START within 2 seconds for Remote Start/Stop Press to turn on Rear Defroster* Locking the Vehicle Doors To lock the doors, exit the vehicle, close all doors, then press* the LOCK button. The status indicator (red warning light on
ページ5に含まれる内容の要旨
5 Using Your Remote Transmitter (cont.) Two-Stage Door Unlock If this feature is enabled on your system, pressing UNLOCK one time will unlock only the driver’s door. Press UNLOCK again within 1 minute to unlock all doors. Activating the Trunk Release Feature Press and hold TRUNK to open the vehicle trunk or hatch (if equipped and connected). If this button is used to operate another accessory, the accessory will stay active for as long as the button is held. Turning on the Vehicle Headlights Pr
ページ6に含まれる内容の要旨
6 Using Your Remote Starter Starting Y our Vehicle The remote start function is activated by pressing LOCK and then pressing START within 2 seconds on the remote control. The system will check the vehicle to ensure that it is safe to start, and if all safety parameters are correct, the engine will start within 5 seconds (diesel engines will take longer.) Press and hold START again to turn off the vehicle. If your vehicle stalls or does not start... TM If the vehicle stalls or does not start, the
ページ7に含まれる内容の要旨
7 Using Your Remote Starter (cont’d) Using the “Quick-stop” Feature If you want to make a short stop and leave your vehicle running (to keep the interior warm or cool, for instance), the quick stop feature allows you to do this while keeping your vehicle secure and your keys with you. To engage quick stop: 1. Stop the vehicle and place the transmission in PARK. 2. With your foot off the brake pedal, press ARM, then press START within 2 seconds on the remote control. The parking lights will turn
ページ8に含まれる内容の要旨
8 Using Your Remote Starter (cont’d) Adding Remote Controls to Your System TM The PowerCode has the ability to operate from up to four (4) remote controls. Follow these instructions to add a remote control to your system. 1. Make sure the system is unlocked and the ignition is off. 2. Open the driver’s door. 3. Turn vehicle ignition on. 4. Press and hold emergency override button. After 15 seconds, the horn will sound three (3) times. This indicates that the unit has entered the remote control p
ページ9に含まれる内容の要旨
9 Basic Troubleshooting This section outlines some of the basic issues you may experience TM while becoming used to the PowerCode PC 7400 . If you have a problem that is not covered by this section, please consult your installer. SSSm Sm Syyy yymmm mmppp pptttttooo oomm m PPPm PPm rrrrrooooobbbbbllllleeeeemmm Sn SSSSn ooooollllluuuuutttttiiiiiooooonnn WeakordeadbatteryChangebattery Remotecontroldoes notwork Remotecontrolnot Programremote programmed control(page8) Hoodisopen Closehood Systemwilln
ページ10に含まれる内容の要旨
10 Emergency Disarm Procedure If your remote control is lost or fails to function, use this procedure to TM disarm the PowerCode PC 7400 and start your vehicle. 1. Use the keys to enter the vehicle. 2. Insert the key into the ignition and turn to the ON position. 3. Locate and press the emergency override button. The Starter Disable will turn off and then you will be able to start your vehicle. Your Emergency Disarm Button is located: Installer Programmed Options Ignition On Door Lock ON OFF Ign
ページ11に含まれる内容の要旨
CODE Systems, INC. LIMITED LIFETIME WARRANTY 11 A CODE Systems INC. (“CODE”) vehicle security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by an authorized dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for the lifetime of the vehicle in which the security system was originally installed. A CODE vehicle security system sold to a retail consumer purchaser by an authoriz
ページ12に含まれる内容の要旨
12
