ページ1に含まれる内容の要旨
INSTALLATION, USE & CARE MANUAL
48” FREESTANDING DUAL FUEL RANGES
Models (A,X)486GPIRX [MTYKPZ(A,U)(4,6)X(2,5)D]
Models (A,X)486GPIRBI [MTYKPZ(A,U)(4,6)W(2,5)D]
Models (A,X)486GPIRCR [MTYKPZ(A,U)(4,6)D(2,5)D]
Models (A,X)486GPIRGI [MTYKPZ(A,U)(4,6)I(2,5)D]
Models (A,X)486GPIRRO [MTYKPZ(A,U)(4,6)R(2,5)D]
Models (A,X)486GPIRVI [MTYKPZ(A,U)(4,6)L(2,5)D]
Models (A,X)486GPIRVE [MTYKPZ(A,U )(4,6)V(2,5)D]
Models (A,X)486GPIRBL [MTYKPZ(A,U)(4,6)U(2,5)D]
Models (A,X)486GPIRN
ページ2に含まれる内容の要旨
From the desk of the President Dear new owner of a Bertazzoni product, I want to thank you for choosing one of our beautiful PRO ranges. We know that you have many brands and products to choose from and we are thrilled that you have decided to take one of your products into your home. We take as much pride in making our ranges as we hope you will in owning them. My family started manufacturing cooking appliances in 1882. Each of BERTAZZONI SpA our products is a blend of Itali
ページ3に含まれる内容の要旨
TABLE OF CONTENTS WARRANTY AND SERVICE........................................................................................................................................ 5 CUSTOMER SERVICE.......................................................................................................................................................5 REPLACEMENT PARTS ...................................................................................................................................
ページ4に含まれる内容の要旨
BAKE ..................................................................................................................................................................... 32 PREHEATING THE OVEN ..................................................................................................................................... 32 GETTING THE BEST RESULTS .............................................................................................................................. 32 BAKEWARE TY
ページ5に含まれる内容の要旨
WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labour warranty. Service on all Bertazzoni products shall be carried out by factory ‐trained professionals only. For warranty service please contact Customer Service at the numbers indicated below. CUSTOMER SERVICE English/Spanish hotline (866) 905 ‐0010 French (800) 561 ‐7625 Fax (714) 428 ‐0040 Email BERTAZZONIHELP@SERVICEPOWER.COM Mailing address SERVICEPOWER 1503 South Coast drive Suite 320 Co
ページ6に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF THE PEOPLE LIVING IN IT. Save this Manual for local electrical inspector’s use. Read and save these instructions for future reference. Observe all governing codes, ordinances and regulations. WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or
ページ7に含まれる内容の要旨
WARNING! Read this instruction booklet before installing and using the appliance. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting the essential safety and operating characteristics. This appliance has been designed for non ‐professional, domestic use only. Do not use
ページ8に含まれる内容の要旨
PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and back) Weight Burner power Auxiliary 3400 BTU/h Semi ‐rapid 6100 BTU/h Rapid 10400 BTU/h Dual burner (inner) 2800 BTU/h Dual burner ( outer) 12000 BTU/h 8
ページ9に含まれる内容の要旨
BEFORE INSTALLATION WARNING! This appliance shall only be installed by an authorized professional. Do not use aerosol sprays in the vicinity of this appliance while it is in operation This appliance shall be installed in accordance with the manufacturer’s installation instructions. ROOM VENTILATION: An exhaust fan may be used with the appliance; in each case it shall be This appliance must be installed in accordance installed in conformity with the appropriate with the norms & st
ページ10に含まれる内容の要旨
INSTALLING THE LEGS INSTALLING THE WORKTOP FRONTGUARD Bertazzoni ranges must be used only with the legs properly installed. To increase the clearance between the front edge of the worktop and the burners it is possible to Four height ‐adjustable legs are shipped with the install the worktop front guard shipped with the range in the polystyrene container situated over appliance. the appliance. To install the front guard, hold it with the pointed Before installing the legs, position
ページ11に含まれる内容の要旨
2 lateral screws from the bottom. INSTALLING THE BACKGUARD The back guard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The supplied back guard is a 2 ‐part assembly. The box also contains a set of metal screws for securing the back guard to the worktop. Disassemble the back guard and position the front part on the worktop. Align the screw holes with the corresponding holes at the back of the worktop. If the hol
ページ12に含まれる内容の要旨
INSTALLING THE ANTI ‐TIP Stability DEVICE INSTALLATION REQUIREMENTS The anti ‐tip bracket shipped with the range must be properly secured to the rear wall as shown in the picture below. ELECTRICAL The height of the bracket from the floor must be determined after the range legs have been A properly grounded and horizontally ‐mounted adjusted to the desired height and after the electrical receptacle Type NEMA 14 ‐50R should range has been levelled. be installed no higher than 3" (
ページ13に含まれる内容の要旨
EXHAUST HOOD INSTALLATION This range will best perform when used with PRO INSTALLATION ADJACENT TO KITCHEN line Bertazzoni exhaust hoods. These hoods have CABINETS been designed to work in conjunction with the This range may be installed directly adjacent to Bertazzoni range and have the same finish for a existing countertop high cabinets (36" or 91.5 cm perfect look. from the floor). For maximum performance, the height of the For the best look, the worktop should be level bottom o
ページ14に含まれる内容の要旨
OPTION 1 – FOUR Wires connection: ELECTRICAL CONNECTION ‐ Connect the L1 receptacle terminal to the The appliance shall be connected to a single incoming BLACK electrical supply wire (L1 ‐hot phase electric line rated at 120/208Vac or wire) 120/240Vac and 60Hz frequency. ‐ Connect the L2 receptacle terminal to the incoming RED electrical supply wire (L2 ‐hot Electric power rating: wire) ‐ 120/208Vac: 6700 Watt or 32 A max. ‐ 120/240Vac: 8500 Watt or 37 A max. ‐ Connect the NEUTRA
ページ15に含まれる内容の要旨
4) Loose strain relief by unscrewing the two strain relief's screws as in diagram. 15
ページ16に含まれる内容の要旨
5) Remove damaged supply cord set by taking off the 4 electrical connection screws (block L1, N, L2 and Ground screw, see diagram) 6) Insert the new supply cord set in the strain relief and lock it with two strain relief's screws in suitable position. 7) Fix well the ring terminals G, L1, N, L2 of the new supply cord set as shown in diagram with its 4 screws 8) Re ‐install the back enclosure panel with 6 screws 9) Slide the appliance back into its proper location A= Rating pl
ページ17に含まれる内容の要旨
WIRING DIAGRAM LEFT OVEN + GAS TOP IGNITION 17
ページ18に含まれる内容の要旨
RIGHT OVEN + GRIDDLE 18
ページ19に含まれる内容の要旨
MANUAL SHUT ‐OFF VALVE GAS CONNECTION THIS VALVE IS NOT SHIPPED WITH THE All gas connections must comply with national APPLIANCE AND MUST BE SUPPLIED BY THE and local codes. The gas supply line (service) INSTALLER. must be the same size or greater than the inlet The manual shut ‐off valve must be installed in line of the appliance. This range uses a 1/2" NPT the gas service line between the gas hook ‐up on inlet (see drawing below for details of gas the wall and the appliance
ページ20に含まれる内容の要旨
PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. The pressure regulator shipped with the appliance has two female threads ½” NPT. The regulator shall be installed properly in order to be accessible when the appliance is installed in its final position. Manifold pressure should be checked with a manometer and comply wi
