ページ1に含まれる内容の要旨
Getting Started Basic Operation Special Features For Your Information
Camcorder
Operating Instructions
Model No. PV-L591
Please read these instructions carefully before attempting to operate this product.
Please save this manual.
For assistance, please call : 1-800-211-PANA(7262) or
send e-mail to : consumerproducts@panasonic.com
LSQT0503A
ページ2に含まれる内容の要旨
Things You Should Know Thank you for choosing Panasonic! Date of Purchase You have purchased one of the most sophisticated and reliable products on the Dealer Purchased From market today. Used properly, it will bring Dealer Address you years of enjoyment. Please take time to fill in the information at the right. Dealer Phone No. The serial number is on the tag located on Model No. the rear side of your Camcorder. Be sure to retain this manual as your convenient Serial No. Camcorder information s
ページ3に含まれる内容の要旨
Getting Started Things You Should Know Safety Precautions WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP) and Super Long Play (SLP) modes. You can also play a Compact VHS Camcorder recording on your VHS VCR using the VHS PlayPak supplied. This Camcorder is equipped with the HQ System to provide excellent video pictures, and is compatible with standard VHS equipment. I
ページ4に含まれる内容の要旨
Important Safeguards 1. Read Instructions – All the safety and 11. Grounding or Polarization – This video unit operating instructions should be read before may be equipped with either a polarized 2- the unit is operated. wire AC (Alternating Current) line plug (a plug having one blade wider than the other) 2. Retain Instructions – The safety and or 3-wire grounding type plug, a plug having operating instructions should be retained for a third (grounding) pin. future reference. The 2-wire polariz
ページ5に含まれる内容の要旨
Getting Started Important Safeguards 15. Power Lines – An outside antenna system b. If any liquid has been spilled into, or should not be located in the vicinity of overhead objects have fallen onto, the video unit. power lines or other electric light or power c. If the video unit has been exposed to rain circuits, or where it can fall into such power or water. lines or circuits. When installing an outside d. If the video unit does not operate normally antenna system, extreme care should be take
ページ6に含まれる内容の要旨
Getting Started Basic Operation Special Features For Your Information Table of Contents Things You Should Know .............................................................................2~3 Important Safeguards ...................................................................................4~5 Precautions........................................................................................................ 5 Self Demo Mode ...................................................................
ページ7に含まれる内容の要旨
Getting Started Self Demo Mode Self Demo mode is on when the screen Before you begin... below appears. To turn it off, follow • Connect Camcorder to power source. steps 1-4 below. EVF or LCD Monitor 1 Set POWER to CAMERA. 2 Press MENU for MENU mode. Press UP or DOWN to select 2, 3, 4 SELF DEMO . 3 Press DISPLAY to select OFF. 4 Press MENU to exit. Note: • Self Demo stops automatically if battery is attached (page 9) and cassette tape is inserted (page 11). • Inserting a tape alone (or attach
ページ8に含まれる内容の要旨
Quick Operation Guide Charging the Battery Pack Insert Cassette Charge Battery Pack fully before Attach fully operation (page 9). 1 charged Battery (page 9). Plug in AC 1 Slide TAPE EJECT Adaptor. 2 to open door. Insert cassette 3 (page 11). Press here to close Insert Battery. CHARGE 4 2 door. Lamp flashes, then stays lit Protection Film when charging is complete. Note: • Remove the Protection Film before use. Camera Recording When the LCD monitor is open, the EVF automatically turns OFF (page 1
ページ9に含まれる内容の要旨
Getting Started Supplying Power Charging the Battery Pack 1 Plug in AC Adaptor. Charge Battery Pack fully before use. POWER Lamp lights. 3 2 Insert Battery. 2 A Align left side of Battery with left edge of AC Adaptor. B Press Battery down and slide in direction of arrow. POWER The CHARGE Lamp flashes, then stays lit 1 Lamp when charging is complete. 3 Remove Battery. Slide Battery to the left and lift off. Note: CHARGE • Charging takes about 1 and 1/2 hours. Lamp • While the DC Power Cable (supp
ページ10に含まれる内容の要旨
Supplying Power Battery Care Caution: To avoid Battery damage: • Charge only with specified charger. • Do not drop or jar Battery. • Battery can be charged within a temperature range of • Use Battery with specified units only. 10 °C (50 °F) and 35 °C (95 °F). • If Battery is used in extremely high • Battery is normally warm after charging or just after use. temperatures, a safety device will • Do not use an insufficiently charged or worn-out Battery. automatically prevent operation. Safety preca
ページ11に含まれる内容の要旨
Getting Started Cassette Information Cassette Insertion/Removal 1 Turn Tape Wheel in direction of arrow until there is no slack. 1 2 Attach Battery (page 9). 3 3 Slide TAPE EJECT to open door. 2 4 Insert cassette as shown. 5 Press here to close door. 4 • To remove the cassette, slide the TAPE 5 EJECT switch. Record/Playback Time Use tapes with the mark in this unit. Cassette type Tape Speed Selector Position TC-20 TC-30 TC-40 SP 20 minutes 30 minutes 40 minutes (Standard Play) SLP 1 hour 1 hour
ページ12に含まれる内容の要旨
Using MENU Mode Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA or VCR. 1 Press MENU for MENU mode. 2 The CAMERA or VCR MENU screen (see below left) appears when Menu mode is entered. 1, 4 3 2 Press UP or DOWN to highlight the desired menu item. 3 Press DISPLAY to set selection. 4 Press MENU to exit. Note: • The Menu mode is canceled if UP/DOWN(/), DISPLAY, or MENU are not pressed within 5 minutes when Self Demo mode is off. • The Menu mode is canceled if UP/
ページ13に含まれる内容の要旨
Getting Started Setting the Clock Set the following items in order: Time Before you begin... Zone, Daylight Saving Time, Date, • Connect Camcorder to power source. and Time. • Set POWER to CAMERA or VCR. 1 Press MENU for MENU mode. Press UP or DOWN to select CLOCK SET . 1, 2, 3, 4 [ CAMERA MODE ] [ VCR MODE ] 2 Press DISPLAY for CLOCK SET menu. Press UP or DOWN to select TIME ZONE, DST, or DATE/TIME. 3 Press DISPLAY for menu of item selected in step 2. To change the setting: TIME ZONE
ページ14に含まれる内容の要旨
Setting the Clock (continued) Setting the Time Zone 3a Press UP or The Camcorder is preset to Eastern time. DOWN to select [ Time Zone chart ] local time zone. Press DISPLAY to confirm entry. ALASKA MOUNTAIN MOUNTAIN • When traveling, repeat this operation and select one of the 8 listed time zones to set the clock to local time. CENTRAL CENTRAL EASTERN Note : • Clock may lose or gain up to 2 minutes per month. HAWAII HAWAII • When traveling outside the listed time ATLANTIC PACIFIC PACIFIC SA
ページ15に含まれる内容の要旨
Getting Started Built-in Auto Light Before you begin... Using the Light • Connect Camcorder to power source. For recording in dim lighting. • Set POWER to CAMERA. Set LIGHT to AUTO. Light turns on/off automatically according to lighting conditions. Or, set LIGHT to ON/OFF manually. appears in EVF or Note: LCD monitor when • Using Light reduces battery operating time. Light is on. • Provide proper ventilation when using Light extensively in a hot environment. • Using Light when the Camcorder is C
ページ16に含まれる内容の要旨
Camera Recording Before you begin... Recording via EVF or LCD • Connect Camcorder to power source. Monitor • Insert cassette with record tab (page 11). View recording scene on EVF or LCD (Liquid Crystal Display) monitor. 1 Press LCD-OPEN to unlock the LCD monitor. Swing LCD monitor fully open 3 and adjust viewing angle. • If you want to record using EVF, close and lock LCD monitor. 2 Set POWER to 1 CAMERA. Lens Cover opens. CAUTION : Power Lamp lights. Rotating partially open LCD • Be sure POWER
ページ17に含まれる内容の要旨
Basic Operation Camera Recording Before you begin... Stand-by Quick Release • Connect Camcorder to power source. If left in RECORD/PAUSE mode for 5 • Insert cassette with record tab (page 11). minutes, Camcorder switches to Stand- by mode to conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by pressing RECORD/PAUSE two times. Stand-By Quick Release is set to OFF at the 2, 3, 4 factory. 1 Set POWER to CAMERA. 2 Press MENU for MENU mode. Press UP or DOWN to sel
ページ18に含まれる内容の要旨
Camera Recording Before you begin... Programmed Recording • Connect Camcorder to power source. Set a recording start and stop time. Or, Use AC Adaptor for longer recordings. set a 5 or 10 second interval recording • Insert cassette with record tab (page 11). • Set POWER to CAMERA. to be done each minute. 1 Press MENU for MENU 1, 2, 3 mode. Press UP or DOWN to select PROGRAMMED REC . 2 Press DISPLAY. (Current time is displayed.) Each additional press of DISPLAY increases start time by 30 minu
ページ19に含まれる内容の要旨
Basic Operation Playing Back Recordings Before you begin... Playback on EVF or LCD Monitor • Connect Camcorder to power source. • Insert recorded tape. Press LCD-OPEN and swing LCD 1 monitor fully open. • If you want to playback on EVF, close and lock LCD monitor. D Set POWER to VCR. 2 Power Lamp lights. • If tape has no record tab, auto playback begins. 1 • EVF or LCD monitor turns on/off by the POWER switch. Speaker • EVF shuts off when LCD monitor is opened and turns back on when LCD 3 is clo
ページ20に含まれる内容の要旨
Playing Back Recordings Before you begin... TV Playback or Viewing • Connect Camcorder to power source. Connect Camcorder to a TV to view • Make all TV-Camcorder connections. playback or recordings in progress. Connections 1 Set POWER to: VCR view playback. CAMERA view picture as it is recorded. 2 Turn TV ON and set to LINE INPUT. See TV owner’s manual. Audio/ 3 Begin playback or recording. Video Out VCR Playback using PlayPak Load Battery in PlayPak Insert Cassette in PlayPak 1 2 R
