ページ1に含まれる内容の要旨
COM2
3. When connecting power to the SMART-V1 or SMART-V1G,
SMART-V1/SMART-V1G ANTENNA™
The multi-cables are also available without any
it is recommended that you use a battery source. In this
WARNING: If you do not use a battery, you must tie together
connectors but with all their wires open-ended.
QUICK START GUIDE
case, it is important that you tie together the bare wires
the bare wires tagged as GND2 (brown), GND
tagged as GND2 (brown) and GND (black) to the battery’s
(black) and DIG
ページ2に含まれる内容の要旨
As CDU establishes the communication session with the ESTABLISHING RECEIVER COMMUNICATION receiver, a progress box is displayed. To open a serial port to communicate with the receiver, complete the following. Once CDU is connected, the progress box disappears and several windows open, including the Console window. CDU SMART ANTENNA 1. Launch CDU from the Start menu folder specified during the is now ready to be used to view status information, enter installation process. The default locati
ページ3に含まれる内容の要旨
DETERMINING WHEN THE POSITION IS VALID LOGGING DATA ENABLING SBAS POSITIONING ENABLING L-BAND POSITIONING When the receiver has a valid position, the Solution Status field An extensive collection of logs has been created to capture the SMART-V1/V1G models are also capable of SBAS positioning. L-Band equipped receivers allow you to achieve sub-meter in CDU’s Position window shows Computed. data your SMART-V1/V1G receives and processes. These logs This positioning mode is enabled using the SBASCO
ページ4に含まれる内容の要旨
Base REAL-TIME KINEMATIC (RTK) POSITIONING USING THE CAN BUS QUESTIONS OR COMMENTS interfacemode com2 none rtcm off Corrections can be transmitted from a base station to a rover A CAN Bus is a serial bus that provides services for processes, If you have any questions or comments regarding your fix position 51.11358042 -114.04358013 station to improve position accuracy. The base station is the data and network management. There is a CAN Bus capable SMART-V1 or SMART-V1G please contact NovAtel
