ページ1に含まれる内容の要旨
RD-20
FM RDS/DAB digital radio
Please read this manual before use
RD20 Issue 2.pmd 1 1/25/2007, 9:53 AM
ROBERTS
Sound for Generations
ページ2に含まれる内容の要旨
Contents Controls ...............................................................................2 Specifications ...................................................................16 Battery operation.................................................................3 Circuit features .................................................................16 Mains operation...................................................................3 Mains Supply ..................................................
ページ3に含まれる内容の要旨
Controls 1 2 3 457 6 8 9 10 11 (Top) 18 17 16 15 14 13 12 1. Telescopic aerial (on rear) 7. Line out socket (on rear) 13. Tuning up button 8. FM/DAB button 2. On/Off button 14. Tuning down button 3. Mains LED indicator 9. +5 button 15. Liquid crystal display (LCD) 10. Info button 4. Station presets 16. Treble control 5. Headphone socket (on rear) 11. Select button 17. Bass control 12. Tuning control 6. Auto Tune button 18. Volume control If you need any further advice, please call our Technical
ページ4に含まれる内容の要旨
Battery operation 1. Remove the Battery cover on the rear of the unit by pushing the battery door in and downwards. . 2. Insert six LR20 (D size) batteries into the spaces in the compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery cover. 3. Reduced power, distortion and a ‘stuttering’ sound are all signs that the batteries may need replacing. 4. If the radio is not to be used for any extended period
ページ5に含まれる内容の要旨
Operating your radio - DAB 2 1. Fully extend the telescopic aerial 2. Press the On/Off button to switch on your radio. The display will show "Roberts DAB digital radio" for a few seconds. 3. If this is the first time the radio is used a quick scan of the UK band III DAB channels will be carried out. The display will show "Autotune Quick scan". If the radio has been used before the last used station will be selected. 4. During Autotune as each group of stations is detected the bottom line of the
ページ6に含まれる内容の要旨
Selecting a station - DAB 1. The top line of the display shows the name of the station currently selected. 2. Rotate the Tuning control or press the Up or Down buttons to scroll through the list of available stations. 2 3. Press and release the Select button to select the station. The display 2 may show "Tuning" while your radio finds the new station. 2 4. Adjust the Volume and Tone controls to the required settings. Note: If after selecting a station the display shows "Not Available" it may be
ページ7に含まれる内容の要旨
Secondary services - DAB 1. Certain radio stations have one or more secondary services associ- ated with them. If a station has a secondary service associated with it the display will show ">" next to the station name on the station list. The secondary service will then appear immediately after the primary service as you turn the tuning control. Display modes - DAB a 1 Your radio has five display modes:- 1. Press the Info button to cycle through the various modes. a. Scrolling text Displays scro
ページ8に含まれる内容の要旨
Finding new stations - DAB As time passes new stations may become available. To find new stations 1 proceed as follows:- 1. Press and release the AutoTune button, the display will show Autotune Quick scan. Your radio will perform a scan of the UK DAB frequencies. As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list 2. To carry out a full scan of the entire DAB band III frequencies press and hold down the AutoTune
ページ9に含まれる内容の要旨
Manual Tuning - DAB Manual tuning allows you to tune directly to the various band III DAB 1 channels. UK DAB stations are currently located in the range 11B to 12D. 1. Press and hold down the Select button until the display shows Manual tune. Release the Select button. 2 2. Rotate the Tuning control or press the Up or Down buttons to select the required DAB channel. 3. Press and release the Select button to select the channel. 2 4. Rotate the Tuning control or press the Up or Down buttons to
ページ10に含まれる内容の要旨
Operating your radio - FM 2 3 1. Carefully extend the telescopic aerial 2. Press the On/Off button to switch on your radio. The display will show "Roberts DAB digital radio" for a few seconds. 4 3. Press the FM/DAB button to select the FM band. 4. Press and hold down either the Up or Down buttons until the frequency in the display begins to change rapidly. Release the button. Your radio will scan the FM waveband, stopping each time 4 it finds a station of sufficient strength. 5. After a few seco
ページ11に含まれる内容の要旨
Manual tuning - FM 1 2 1. Press the On/Off button to switch on your radio. 2. Press the FM/DAB button to select the FM band. Fully extend the 3 Telescopic aerial . 3. Rotate the Tuning control or press the Up or Down buttons to tune to a station. The frequency will change in steps of 50kHz. 3 3 4. When the waveband end is reached the radio will recommence tuning from the opposite waveband end. 5. Set the Volume control and Tone controls to the desired settings. 6. To switch off your radio press
ページ12に含まれる内容の要旨
Display modes - FM 1 a On FM the bottom line of the display can be set to any of the following modes:- b 1. Press the Info button to cycle through the various modes. a. Scrolling text Displays scrolling text messages such as artist/ c track name, phone in number etc. b. Program Type Displays type of station being listened to e.g. d Pop, Classic, News etc. c. Signal strength Displays signal strength for station being listened to. e d. Time and date Displays current time and date. f e. Frequency D
ページ13に含まれる内容の要旨
Presetting stations - DAB and FM 1 There are 10 memory presets for each of the 2 wavebands. 1. Press the On/Off button switch on the radio. 2. Tune to the required station as previously described. 3. Press and hold down the required Preset button until the display 3 shows e.g. Preset 1 stored. The station will be stored under the chosen preset button. Repeat this procedure for the remaining presets. 4. Presets 6 to 10 are obtained by pressing +5 followed by Preset button 1 to 5. e.g preset 7 c
ページ14に含まれる内容の要旨
Recalling a preset station - DAB and FM 1 2 1. Press the On/Off button to switch on the radio. 2. Select the required waveband by pressing the FM/DAB button. 3. Momentarily press the required Preset button, your radio will tune to the station stored in preset memory. 3 4. Presets 6 to 10 are obtained by pressing +5 and Preset button 1 to 5. e.g preset 7 can be recalled by pressing +5 followed by Preset button 2 4 4 13 RD20 Issue 2.pmd 14 1/25/2007, 9:53 AM
ページ15に含まれる内容の要旨
System reset 1 If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. 1. Switch off your radio 2. Switch on your radio - before the screen shows Roberts DAB digital radio press and hold down the Select button until the display 2 2 shows System Reset. 3. A full reset will be performed all presets and station lists will be erased. 4. If DAB was used last then a quick scan of the UK band III DAB channels will be carried
ページ16に含まれる内容の要旨
Headphone socket A 3.5mm Headphone Socket located on the rear of your radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker. IMPORTANT: Excessive sound pressure from earphones and head- phones can cause hearing loss. Line out socket A 3.5mm Line out socket located on the rear of your radio is provided for connecting the audio signal to an external amplifier. Inserting a line out audio cable will not mute the internal lou
ページ17に含まれる内容の要旨
• No objects filled with liquids such as vases, shall be placed on General the radio. Do not allow this radio to be exposed to water, steam or sand. Do not • It is recommended to operate the product such that there is a minimum leave your radio where excessive heat could cause damage such as in distance (10cm recommended) to adjacent objects in order to a parked car where the heat from the sun can build up even though the ensure good ventilation. outside temperature may not seem too high. It is
ページ18に含まれる内容の要旨
Mains supply The RD-20 will operate from a supply of AC 230 volts, 50Hz only. The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too The wire coloured BROWN must be connected to the terminal marked L short to reach a power point, then obtain an appropriate safety approved or coloured RED. extension lead or adaptor. If in doubt
ページ19に含まれる内容の要旨
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge. The guarantee does not cover: 1. Damage resulting from incorrect use. 2. Consequential damage. 3. Receivers with removed or defaced serial numbers. N.B. Damaged or broken telesco
ページ20に含まれる内容の要旨
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Website: http://www.robertsradio.co.uk Issue 2 RD20 Issue 2.pmd 20 1/25/2007, 9:53 AM
