ページ1に含まれる内容の要旨
37_CoverEB_Eng.fm 1 ページ ２００５年１２月１３日 火曜日 午後８時３９分
Operating Instructions
Digital Video Camera
Model No. NV-GS37EB
NV-GS27EB
NV-GS37EB NV-GS27EB
DV IN — —
Video Light ¥ —
Before use, please read these instructions completely.
LSQT1006 A
ページ2に含まれる内容の要旨
LSQT1006ENG.book 2 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Movie Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Information for Your Safety As this equipment gets hot
ページ3に含まれる内容の要旨
LSQT1006ENG.book 3 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Operating Instructions ≥These Operating Instructions apply to models Information on Disposal for Users of NV-GS37 and NV-GS27. Waste Electrical & Electronic Equipment ≥The illustrations used in these Operating (private households) Instructions show model NV-GS37, however, This symbol on the products and/ parts of the explanation refer to different or accompanying documents models. means that used electrical and ≥Depending on the model, som
ページ4に含まれる内容の要旨
LSQT1006ENGTOC.fm 4 ページ ２００５年１２月１４日 水曜日 午前１１時５４分 Contents Information for Your Safety.............................. 2 Playback mode Playing back tape .......................................... 31 Before using Slow-motion playback/frame-by-frame playback...................................................... 32 Accessories ..................................................... 5 Variable-speed search function Optional ........................................................... 5 (NV-GS37 only)
ページ5に含まれる内容の要旨
Eng_Body.fm 5 ページ ２００５年１２月１５日 木曜日 午後１時４８分 Before using Before using Accessories ª Sales and Support Information The followings are the accessories supplied with this product. Customer Care Centre ≥For customers within the UK: 08705 357357 1) ≥For customers within the Republic of lreland: 01 289 8333 ≥Visit our website for product information VSK0651B K2CT3CA00004 (DE-974GB) K2GJ2DC00015 (RJA0053-3X) ≥E-mail: customer.care@panasonic.co.uk 2) 3) 4) Technical Support for AV Software CR2025 ≥Fo
ページ6に含まれる内容の要旨
LSQT1006ENG.book 6 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using Parts identification and handling (16) (17) ª Camera (12) (18) (19) (20) (13) (1) (4) (21) (22) (2) (5) (14) (6) (3) (1) Built-in LED video light (NV-GS37 only) -20- (2) White balance sensor -29- (15) Remote control sensor (NV-GS37 only) -19- (12) Viewfinder -11-, -48- (3) Grip belt -7- (4) Lens Due to limitations in LCD production ≥Fit the MC protector (VW-LMC30E; technology, there may be some tiny bright or optional), the ND fi
ページ7に含まれる内容の要旨
LSQT1006ENG.book 7 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using Fitting the lens cap Fit the lens cap to protect the surface of the lens. 1 The lens cap and lens cap cord comes (27) preattached to the grip belt. Pass the end of the lens cap cord through the attached eye on the lens cap. Then pass the lens cap through the loop made by itself (28) and pull tight. (29) (27) Cassette cover -13- (28) Zoom lever [W/T] -24- Volume lever [sVOLUMEr] -31- (29) Photoshot button [PHOTO SHOT] -23- ≥When
ページ8に含まれる内容の要旨
LSQT1006ENG.book 8 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ª Connecting to the AC outlet Power supply ª Charging the battery When this product is purchased, the battery is not charged. Charge the battery before using this product. ≥Battery charging time (-9-) ≥We recommend using Panasonic batteries. ≥If you use other batteries, we cannot guarantee 1 the quality of this product. ≥If the DC input lead is connected to the AC adaptor, then the battery will not get charged. Remove the DC inp
ページ9に含まれる内容の要旨
LSQT1006ENG.book 9 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ≥When you use both the viewfinder and the Charging time and recordable time LCD monitor simultaneously while rotating The times shown in the table below show the the LCD monitor frontward to record yourself times at a temperature of 25 oC and a humidity of etc. 60%. This is just a guide. If the temperature is ≥The batteries heat up after use or charging. The higher or lower than the specified value, the main unit of the movie
ページ10に含まれる内容の要旨
LSQT1006ENG.book 10 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ª How to turn the power on and off with Setting date and time the LCD monitor/viewfinder When the movie camera is turned on for the first When the power switch is set to [ON], the power time, [SET DATE AND TIME] will appear. can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode. OFF ON 1 Open the LCD monitor out or extend the viewfinder to use. (-11-) ≥Select [YES] and press th
ページ11に含まれる内容の要旨
LSQT1006ENG.book 11 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using Using the viewfinder WARNING ª Extending the viewfinder THE LITHIUM BATTERY IN THIS 1 Pull out the viewfinder. Extend it by EQUIPMENT MUST ONLY BE REPLACED pinching the extension knob. BY QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL PANASONIC SUPPLIER. Using the LCD monitor You can record the image while viewing it on the opened LCD monitor. 1 Put a finger on the LCD monitor open part and open the LCD monitor out in
ページ12に含まれる内容の要旨
LSQT1006ENG.book 12 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ª To cancel Quick Start Quick start 1 Set [SETUP] >> [QUICK START] >> [OFF]. When quick start is on the battery power is still (-16-) being consumed, even when the LCD monitor ≥If the [OFF/ON] switch is set to [OFF] while the and the viewfinder are closed. unit is in quick start standby, the power turns off. The camera will resume recording/pause mode ≥If the standby continues for approx. 30 minutes, about 1.7 seconds after the
ページ13に含まれる内容の要旨
LSQT1006ENG.book 13 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ≥When inserting a previously recorded cassette, Inserting/removing a cassette use the blank search function to find the position 1 Fit the AC adaptor or the battery and turn on where you want to continue recording. If you are the power. overwriting a previously recorded cassette, be 2 Slide the [OPEN/EJECT] lever and open the sure to find the position where you want to cassette cover. continue recording. ≥Close the cassette co
ページ14に含まれる内容の要旨
LSQT1006ENG.book 14 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ª Joystick and screen display Selecting a mode Push the centre of the joystick, and icons will be Rotate the mode dial to select the desired mode. displayed on the screen. Each time the joystick is 1 Rotate the mode dial. moved down, the indication changes. ≥Set your desired mode to 1. (In the Tape Playback Mode, the icons will be automatically displayed on the screen.) 1 1) Tape Recording Mode ([AUTO/MANUAL/FOCUS] switch is set t
ページ15に含まれる内容の要旨
Eng_Body.fm 15 ページ ２００５年１２月１３日 火曜日 午後８時３５分 Before using 2) Tape Recording Mode Help mode ([AUTO/MANUAL/FOCUS] switch is set to Select an icon for an explanation of the function. [MANUAL]) ≥Set to Tape Recording Mode. 1 Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears. 1 2 2 Move the joystick right to select the Help mode icon [ ]. 1 2 ≥The help mode explains the operation icons displayed when the [AUTO/MANUAL/ FOCUS] switch
ページ16に含まれる内容の要旨
LSQT1006ENG.book 16 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using 5 Move the joystick right or press it to set the Switching the language selection. You can switch the language on the screen display or the menu screen. 1 Set [LANGUAGE] >> select the desired language. 6 Move the joystick up or down in order to select the item to be set. Using the menu screen For each individual menu, please refer to -37-. 7 Press the joystick to determine the setting. 1 Press the [MENU] button. MENU ª To exit th
ページ17に含まれる内容の要旨
LSQT1006ENG.book 17 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ª Operating with remote control Adjusting LCD monitor/viewfinder (NV-GS37 only) The menu screen transition is the same as when ª Adjusting the brightness and colour the buttons on the main unit are used. level 1 Press the [MENU] button. 1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES]. 2 Select a menu item. ≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit. 2 Move the joystick u
ページ18に含まれる内容の要旨
Eng_Body.fm 18 ページ ２００５年１２月１３日 火曜日 午後８時３６分 Before using Using the remote control (NV-GS37 only) (10) (14) ª Remote control Using the remote control supplied will enable (15) controlling almost all the functions of this camera (16) to be controlled. (11) (12) (13) (1) (17) (3) (2) (4) (10) Photoshot button [PHOTO SHOT] ¢ (11) Rewind/review button [6] (12) Pause button [;] (5) (13) Stop button [∫] (14) Recording start/stop button [START/STOP] ¢ (15) Playback button [PLAY 1] (16) Fast for
ページ19に含まれる内容の要旨
LSQT1006ENG.book 19 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using ª Selecting the remote control mode If 2 cameras are used simultaneously, set the WARNING mode for one pair of movie camera and remote “THE LITHIUM BATTERY IS A CRITICAL control to [VCR1] and that of the other pair to COMPONENT (TYPE NUMBER CR2025 [VCR2]. This will prevent interference between MANUFACTURED BY PANASONIC). the 2 pairs. (The default setting is [VCR1]. When IT MUST NEVER BE SUBJECTED TO the button-type battery is
ページ20に含まれる内容の要旨
LSQT1006ENG.book 20 ページ ２００５年１２月９日 金曜日 午前１１時１７分 Before using Recording with the built-in LED video light (NV-GS37 only) Gain up mode works with the built-in LED video light to enhance the light’s brightness and brighten the natural colours in a scene. 1 Press the [LIGHT] button. 1 LIGHT ≥The built-in LED video light lights up and the gain up mode is set to on. ≥The gain up mode will be brighter than when only the LED video light is on, but washed out images will appear. 2 Press the [LIGH
