ページ1に含まれる内容の要旨
LSQT1174ENG.book 1 ページ ２００７年１月２９日 月曜日 午後１時２８分
Operating Instructions
Digital Video Camera
Model No. NV-GS60GN
Before use, please read these instructions completely.
LSQT1174 A
ページ2に含まれる内容の要旨
LSQT1174ENG.book 2 ページ ２００７年１月２９日 月曜日 午後１時２８分 ª Carefully read the Operating Information for your safety Instructions and use the Movie Camera correctly. ≥Injury or material damage resulting from any WARNING: kind of use that is not in accordance with the TO REDUCE THE RISK OF FIRE, ELECTRIC operating procedures explained in these SHOCK OR PRODUCT DAMAGE, Operating Instructions are the sole ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, responsibility of the user. MOISTURE, DRIPPING OR SPLASH
ページ3に含まれる内容の要旨
LSQT1174ENG.book 3 ページ ２００７年１月２９日 月曜日 午後１時２８分 IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD. Use only the recommended accessories. ≥Do not use any other AV cables except the supplied one. ≥When you use the cable which are sold separately, please make sure to use the one whose length is less than 3 metres. -If you see this symbol- Information on Disposal in other Countries outside the European Union This symbol is only valid
ページ4に含まれる内容の要旨
LSQT1174ENG.book 4 ページ ２００７年１月２９日 月曜日 午後１時２８分 Contents Information for your safety ............................... 2 Playback mode Playing back tape .......................................... 29 Before using Frame-by-frame playback ............................. 30 Playback on TV ............................................. 30 Accessories ..................................................... 5 Optional ........................................................... 5 Parts identification and handl
ページ5に含まれる内容の要旨
LSQT1174ENG.book 5 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using Before using Parts identification and handling Accessories ª Camera The followings are the accessories supplied with this product. (3) 1) (1) (4) 2) 4) 3) (5) (2) (1) White balance sensor -27- (2) Grip belt -7- (3) Lens 1) AC adaptor, DC input lead, AC mains lead ≥Fit the MC protector (VW-LMC30E; -8- optional), the ND filter (VW-LND30E; 2) Battery pack -8- optional), the tele conversion lens 3) AV cable -31- (VW-LT3014E; optional)
ページ6に含まれる内容の要旨
LSQT1174ENG.book 6 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using (15) (16) (11) (17) (25) (18) (19) (12) (20) (26) (27) (13) (25) Cassette cover -13- (26) Zoom lever [W/T] -21- Volume lever [sVOLUMEr] -29- (27) Photoshot button [ ] -20- (14) (11) Viewfinder -11-, -45- Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the Viewfinder screen. However, this is not a malfunction and does not affect the recorded picture. (12) Battery holder -8- (28) (13) B
ページ7に含まれる内容の要旨
LSQT1174ENG.book 7 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using Fitting the lens cap The grip belt Fit the lens cap to protect the surface of the lens. Adjust the belt length so it fits your hand. 1 The lens cap and lens cap cord comes 1 Adjust the belt length. preattached to the grip belt. Pass the end of the lens cap cord through the attached eye on the lens cap. Then pass the lens cap through the loop made by itself and pull tight. 3 2 1 1 Flip the belt. 2 Adjust the length. 3 Fix the belt.
ページ8に含まれる内容の要旨
LSQT1174ENG.book 8 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using 1 Connect the AC mains lead to the AC Power supply adaptor and the AC mains socket. 2 Connect the DC input lead to the AC ª Charging the battery When this product is purchased, the battery is not adaptor. 3 Connect the DC input lead to this product. charged. Charge the battery before using this product. ≥The output plug of the AC mains lead is not completely connected to the AC adaptor ≥Battery charging time (-9-) socket. As show
ページ9に含まれる内容の要旨
LSQT1174ENG.book 9 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using ≥The recordable time will become shorter in the Charging time and recordable time following cases: The times shown in the table below show the ≥When you use both the viewfinder and the times at a temperature of 25 oC and a humidity of LCD monitor simultaneously while rotating 60%. This is just a guide. If the temperature is the LCD monitor frontward to record yourself higher or lower than the specified value, the etc. charging
ページ10に含まれる内容の要旨
LSQT1174ENG.book 10 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using ª How to turn the power on and off with Setting date and time the LCD monitor/viewfinder When the movie camera is turned on for the first When the power switch is set to [ON], the power time, [SET DATE AND TIME] will appear. can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode. OFF ON 1 Open the LCD monitor out or extend the viewfinder to use. (-11-) ≥Select [YES] and press the
ページ11に含まれる内容の要旨
LSQT1174ENG.book 11 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using WARNING Using the viewfinder THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED ª Extending the viewfinder PERSONNEL. IF THIS IS NECESSARY, 1 Pull out the viewfinder. Extend it by CONTACT THE PANASONIC CUSTOMER pinching the extension knob. CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE. Using the LCD monitor You can record the image while viewing it on the opened LCD monitor. 1 Put a finger on
ページ12に含まれる内容の要旨
LSQT1174ENG.book 12 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using ª To cancel Quick Start Quick start 1 Set [SETUP] >> [QUICK START] >> [OFF]. When quick start is on the battery power is still (-16-) being consumed, even when the LCD monitor ≥If the [OFF/ON] switch is set to [OFF] while the and the viewfinder are closed. unit is in quick start standby, the power turns off. The camera will resume recording/pause mode ≥If the standby continues for approx. 30 minutes, about 1.7 seconds after the L
ページ13に含まれる内容の要旨
LSQT1174ENG.book 13 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using ≥When inserting a previously recorded cassette, Inserting/removing a cassette use the blank search function to find the position 1 Fit the AC adaptor or the battery and turn on where you want to continue recording. If you are the power. overwriting a previously recorded cassette, be 2 Slide the [OPEN/EJECT] lever and open the sure to find the position where you want to cassette cover. continue recording. ≥Close the cassette cov
ページ14に含まれる内容の要旨
LSQT1174ENG.book 14 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using ª Joystick and screen display Selecting a mode Push the centre of the joystick, and icons will be Rotate the mode dial to select the desired mode. displayed on the screen. Each time the joystick is 1 Rotate the mode dial. moved down, the indication changes. ≥Set your desired mode to 1. (In the Tape Playback Mode, the icons will be automatically displayed on the screen.) 1 1) Tape Recording Mode ([AUTO/MANUAL/FOCUS] switch is set to
ページ15に含まれる内容の要旨
LSQT1174ENG.book 15 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using 2) Tape Recording Mode Help mode ([AUTO/MANUAL/FOCUS] switch is set to Select an icon for an explanation of the function. [MANUAL]) ≥Set to Tape Recording Mode. 1 Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears. 1 2 2 Move the joystick right to select the Help mode icon [ ]. 1 2 ≥The help mode explains the operation icons displayed when the [AUTO/MANUAL/ FOCUS] swi
ページ16に含まれる内容の要旨
LSQT1174ENG.book 16 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using 5 Move the joystick right or press it to set the Switching the language selection. You can switch the language on the screen display or the menu screen. 1 Set [LANGUAGE] >> select the desired language. 6 Move the joystick up or down in order to select the item to be set. Using the menu screen For each individual menu, please refer to -35-. 7 Press the joystick to determine the setting. 1 Press the [MENU] button. MENU ª To exit the
ページ17に含まれる内容の要旨
LSQT1174ENG.book 17 ページ ２００７年１月２９日 月曜日 午後１時２８分 Before using Adjusting LCD monitor/viewfinder ª Adjusting the brightness and colour level 1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES]. 2 Move the joystick up or down in order to select the item to be adjusted. [LCD SET] : Brightness of the LCD monitor : Colour level of the LCD monitor [EVF SET] : Brightness of the viewfinder EVF 3 Move the joystick left or right to move the bar indication representing the brightness. 4 Press the [MENU] bu
ページ18に含まれる内容の要旨
LSQT1174ENG.book 18 ページ ２００７年１月２９日 月曜日 午後１時２８分 Record mode ≥Adjustment of LCD monitor/viewfinder (-17-) Record mode ≥Power supply (-8-) ≥Insert a cassette (-13-) Check before recording ≥Setting date/time (-10-) Check the following before recording important ≥Setting SP/LP mode (-18-) events such as weddings or when the movie ª About auto mode camera has not been used for a long time. ≥Set the [AUTO/MANUAL/FOCUS] switch to Conduct a test recording to make sure that the [AUTO], and colou
ページ19に含まれる内容の要旨
LSQT1174ENG.book 19 ページ ２００７年１月２９日 月曜日 午後１時２８分 Record mode ª Concerning the remaining tape time Recording on a tape indication on the screen Remove the lens cap. (-7-) ≥The remaining tape time is indicated in minutes. (When the camera is turned on with the lens cap (When it reaches less than 3 minutes, the fitted, the automatic white balance adjustment indication starts flashing.) may not function properly. Please turn the camera ≥During a 15 seconds or shorter recording, the on after
ページ20に含まれる内容の要旨
LSQT1174ENG.book 20 ページ ２００７年１月２９日 月曜日 午後１時２８分 Record mode Blank search function Recording a still picture on a tape (Photoshot) Searches for the last part of the image recorded (unused part of the tape). After the search is Still pictures can be recorded from the movie finished, the blank search function is cancelled camera lens. and the camera is put into recording pause. ≥Set to Tape Recording Mode. ≥Set to Tape Recording Mode. 1 Press the [ ] button in the recording 1 Press the joyst
