ページ1に含まれる内容の要旨
®
DLP Cinema Projector
NC1600C
User’s Manual
ページ2に含まれる内容の要旨
Important Information Precautions: DOC compliance Notice Please read this manual carefully before using your This Class A digital apparatus meets all requirements of the NC1600C and keep the manual handy for future reference. Canadian Interference-Causing Equipment Regulations. Important Safeguards Machine Noise Information Regulation - 3. GPSGV, These safety instructions are to ensure the long life of your The highest sound pressure level is less than 70 dB (A) in projector and to prevent fire
ページ3に含まれる内容の要旨
Important Information • Do not place the projector in the following conditions: • When main body is damaged, cooling fluids may come out - near water, baths or damp rooms. of internal part. DO NOT touch and drink the cooling fluid. - on an unstable cart, stand, or table. When the cooling fluids are swallowed or contacted with - in direct sunlight, near heaters or heat radiating appliances. your eyes, please consult with doctors immediately. - in a dusty, smoky or steamy environment. • When using
ページ4に含まれる内容の要旨
Important Information Lamp Caution: Please read before operation • Due to the lamp being sealed in a pressurized environment, there is a small risk of explosion, if not operated correctly. There is minimal risk involved, if the unit is in proper working order, but if damaged or operated beyond the recommended hours, the risk of explosion increases. Please note that there is a warning system built in, that displays following message when you reach a preset operating time “Bulb Over Time”. When yo
ページ5に含まれる内容の要旨
Table of Contents Table of Contents ............................................................................ 5 1.What’s in the Box? and the Names of the Projector Parts............. 6 1-1. Features .................................................................................................................................................................... 6 1-2. What’s in the Box? ...........................................................................................................
ページ6に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-1. Features ® • DLP Cinema dedicated projector that supports large screen needs NEC has applied its mounting technology and leading imaging technology to newly develop lamp and optical systems as well as a cooling system to support large screen needs. • Equipped with easy to use functions (1) Lens memory function that can be operated with one touch, and lamp power memory function ® The DLP Cinema projector is provided with a lens memor
ページ7に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts • DMD Face Dust Protection Structure A dust contral shield is arranged between each DMD chip of R, G and B, and the spectroscopic/condenser prism to prevent dust and dirt in the air, and oily particles in smoke associated with event halls from coming into contact with the face of the DMD and causing operating problems. •Efficient cooling of the heat from the DMD unit by the cooling structure The DMD unit uses a highly efficient liquid co
ページ8に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-2. What’s in the Box? Check the content of the accessories. NC1600C projector Exhaust outlet protective sheet fastening band x 4 Small iris x 1 Remote control (RD-371E) Lamp door key x 2 UM-3 AA size battery (for the remote control) x 2 Sheet of title labels (for 20 labels) x 2 Remote cable (16 m) x 1 Important Information x1 Attachment for lamp x 1 CD-ROM (User’s Manual) Exhaust outlet protective sheet x 1 ○○○○○○○○○○○○○○○○○○○○○ ○○○○○○
ページ9に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-3. Names of the Projector Parts 1-3-1. Front of the Projector 5 1 6 7 2 3 4 1. Air outlet Connects to an exhaust device to exhaust heat from the lamp. Please contact your dealer/distributor to install the exhaust device. 2. Control panel On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of projected screen. (See page 12) 3. Connection terminals Various image signal
ページ10に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-3-2. Rear of the projector 3 4 1 5 2 1. AC power cable This is the cable that supplies AC power to the projector head. The AC power cable is not an accessory. Consult with your dealer/distributor about the AC power cable. 2. Level adjusters (in four positions on bottom) In the ordinary installation, you can adjust the projector inclination at 4 positions. 3. Air inlet Air is taken in here to provide cooling of the projector. Do not cov
ページ11に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-3-3. Connection terminals 1 2 3 4 5 SDI-A SDI-B DVI-A DVI-B GPI/O LAN-A LAN-B CINEMA SYSTEM REMOTE RS-232C PC CARD USB IN 6 7 8 9 10 11 1. HDSDI A input terminal (SDI-A) (BNC) Connect a Video Server of Video source to this terminal. Use a 75 Ω coaxial cable. 2. HDSDI B input terminal (SDI-B) (BNC) Connect a Video Server or Video source to this terminal. Use a 75 Ω coaxial cable. 3. DVI-D A input terminal (DVI-A) (DVI-D 24P) Connect the
ページ12に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-3-4. Control panel 3 12 8 9 MMS STATUS 4 10 11 12 13 14 15 16 17 1819 20 21 5 6 7 1. Remote control light reception unit This receives signals from the remote control. 2. BACKLIGHT button Operate this button to turn on/off the back light of the LCD screen and operation panel. 3. MMS STATUS indicator This indicates the link status of the optional multi-media switcher (MMS). Off When not using multi-media switcher. Green lighting When l
ページ13に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 9. 1 to 8 buttons Press the 1 to 8 buttons while depressing the CTL (MACRO) button to select titles (input signals) assigned to each button. To this projector, 100 titles at most can be registered (input signal registration). Among the registered titles, any 8 titles can be assigned to the buttons <1> to <8>. The indicator to the left of the buttons show the assigned/selected status of titles. Green lighting When any title is assigned to
ページ14に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 1-4. Names on the Remote Control 1. POWER ON button Operate this button to turn on the power to your projector. Press it three seconds or longer. When turning on the power to your projector, first set the main power switch to the main unit to ON, which puts your projector on standby. (See page 21) 2. POWER OFF button Operate this button to turn off (standby) the power to your projector. Press it three seconds or longer. 3. Numeric
ページ15に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts 11. SELECT buttons •Press the SELECT / button when the menu is displayed, and a menu item can be selected. •Press the SELECT button when the menu is displayed, and a submenu will be displayed. •Press the SELECT button when the menu is displayed, and a menu one level above will be displayed. • During character entry, press the SELECT button while depressing the CTL button, then one character will be deleted. 12. ENTER button
ページ16に含まれる内容の要旨
1. What’s in the Box? and the Names of the Projector Parts Using the remote control cable Use the remote control cable when there are objects that interrupt or obstruct the space between the remote control reception unit on the projector and the remote control, or when you are using the remote control beyond its effective range. Note that the remote control cable is connected first to the remote control, then to the projector head. SDI-A SDI-B DVI-A DVI-B CINEMA SYSTEM REMOTE RS-232C PC CARD USB
ページ17に含まれる内容の要旨
2. Installation and Connection 2-1. Steps for setting up and connecting Use the following steps for setting up your projector: • Step 1 Setup the screen and projector. (Contact your dealer to carry out the setup.) • Step 2 Connect cables to the image input terminals. (See page 18) Connect cables to the various control terminals. (See page 19) 17
ページ18に含まれる内容の要旨
2. Installation and Connection 2-2. Connecting the image input terminals Your projector has four image input terminals, namely, the HDSDI A input terminal, the HDSDI B input terminal, the DVI-D A input terminal, and the DVI-D B input terminal. • HDSDI A/B input terminal (SDI A/SDI B) ------------ Inputs serial digital images from a Video Server or Video source. • DVI-D A/B input terminal (DVI A/DVI B) ------------- Inputs digital RGB signals from a PC. 75Ω coaxial cable DVI-D signal cable SDI-A
ページ19に含まれる内容の要旨
2. Installation and Connection 2-3. Connecting the various control terminal For control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45). • PC control terminal (PC CONTROL) ----- Use this terminal when controlling the projector in serial connection from a PC. • Ethernet port (LAN 1/LAN 2) --------------- Use this port when controlling the projector in LAN connection from a PC. RS-232C SDI-A SDI-B DVI-A DVI-B GP I/O LAN-A LAN-B CINEMA SYSTEM REMOTE RS
ページ20に含まれる内容の要旨
3. Projection of Images (Basic Operation) 3-1. Steps of projecting images • Step 1 Turn on the power to the projector. (See page 21) • Step 2 Select the title of input signal. (See page 23) • Step 3 Adjust the position and size of the projected screen. (See page 24) • Step 4 Turn off the power to the projector. (See page 27) 20
