ページ1に含まれる内容の要旨
Projector
CPX3
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in
a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury
ページ2に含まれる内容の要旨
Content Content About this manual . . . . . . . 1 . . EASY MENU . . . . . . . . . . .21 . . . . Aspect , Aout onekeyst execute , Content . . . . . . . . . . . . . 2 . . . . . Koneeyst , Picture mode , Brightness , Projector features . . . . . . . 3 . . . Contrast , Color , Tint , Sharpness , Preparations . . . . . . . . . .3 . . . . Whisper , Mirror , Reset , Fteril time , Contents of package . . . . . . . . . . . . .3 Language , Go to Advanced Menu... Fastening
ページ3に含まれる内容の要旨
Projector features / Preparations Projector features This projector has a capability to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. The compact and light body of the projector can give a benefit to mobile users to carry it to anywhere comfortably. ü The WXGA (1280x800) native resolution can support Widescreen PCs to realize your original images on
ページ4に含まれる内容の要旨
Part names Part names (1) (2) (3) (4) HOT! Projector (5) (1) Lamp cover (52) The lamp unit is inside. (2) Focus ring (16) (7) (6) (3) Zoom ring (16) (10) (7) (4) Control panel (5) (9) (8) (11) (Bottom) (5) Speaker (32) (6) Elevator knobs (x 2) (16) (7) Elevator feet (x 2) (16) (8) Lens (13, 55) (9) Lens cover (3) (10) Intake vents (11) Filter cover ( 54) The air filter and intake vent are inside. (12) Exhaust vents (13) AC inlet (10) (14) VIDEO port (8) (13) (15) S-VIDEO port (8
ページ5に含まれる内容の要旨
Part names (1) (2) (3) (4) (5) (6) Control panel LAMP INPUT/ STANDBY/ON (1) STANDBY/ON button (13) ENTER MENU TEMP (2) INPUT/ENTER button (14, 20) POWER (3) MENU button (20) It consists of four cursor buttons. (4) POWER indicator (13, 57) (5) TEMP indicator (57) (6) LAMP indicator (57) Remote control (1) VIDEO button (15) (2) (3) (2) COMPUTER button (14) (4) (3) MY SOURCE/DOC.CAMERA button (15) (1) MY SOURCE/ (7) VIDEO COMPUTER DOC.CAMERA (4) STANDBY/ON button (13) (6) (8) ASPECT AUT
ページ6に含まれる内容の要旨
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280x800. (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%) On a horizontal surface B A C 16:10 Suspended from the ceiling • Keep a space of 30 cm or more between th
ページ7に含まれる内容の要旨
Setting up Arrangement (continued) WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand. • Do not place the projector on its side, front or rear position. • Consult with your dealer before a special i
ページ8に含まれる内容の要旨
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. Speakers VCR/DVD player PC (with an amplifier) S-VIDEO OUT AUDIO OUT L R AUDIO AUDIO AUDIO RGB OUT USB-A RGB OUT OUT OUT IN or AUDIO OUT HDMI USB COMPUTER IN1 COMPUTER IN2 AUDIO IN S-VIDEO
ページ9に含まれる内容の要旨
Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector . - Some PCs have multiple screen display modes that may include some signals which are not supported by this projector. - Alth
ページ10に含まれる内容の要旨
AC IN Setting up Connecting power supply POWER indicator Put the connector of the power cord into 1. POWER the AC inlet of the projector. Firmly plug the power cord’s plug into AC inlet 2. the outlet. In a couple of seconds after Connector of the power cord the power supply connection, the POWER to the outlet indicator will light up in steady orange. Please remember that when the AUTO ON function (38) activated, the connection of the power supply make the projector turn on. WARNING ►Pl
ページ11に含まれる内容の要旨
Remote control Remote control Putting batteries Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. Holding the hook part of the battery 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus te
ページ12に含まれる内容の要旨
Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal MY SOURCE/ frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK control does not function properly, attempt to change the signal MAGNIFY FREEZE PAGE VOLUME UP frequency. ON DOWN In order to set the Mode, please keep pressing the OFF KEYSTONE MY BUTTON MUTE 1 2 combination of two buttons listed below simultaneously
ページ13に含まれる内容の要旨
Power on/off Power on/off Turning on the power STANDBY/ON button POWER indicator Make sure that the POWER indicator turns in 1. steady orange and the lens cover is removed. LAMP INPUT/ STANDBY/ON ENTER COMPUTER/ MENU TEMP SEARCH VIDEO STORAGE Press the STANDBY/ON button on the projector or POWER 2. the remote control. ASPECT AUTO BLANK The projection lamp will light up and the POWER MY SOURCE/ VIDEO COMPUTER DOC.CAMERA indicator will begin blinking in green. When the power ASPECT AUTO SEA
ページ14に含まれる内容の要旨
Operating Operating VOLUME +/- button Adjusting the volume Use the VOLUME +/VOLUME - buttons to adjust the volume. 1. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA A dialog will appear on the screen to aid you in adjusting the volume. ASPECT AUTO SEARCH BLANK If you do not do anything, the dialog will automatically disappear after MAGNIFY FREEZE PAGE VOLUME a few seconds. UP ON DOWN ● When is selected for the AUDIO item of the AUDIO menu (32), OFF the volume adjustment is disabled. KEYSTON
ページ15に含まれる内容の要旨
Operating Selecting an input signal (continued) VIDEO button Press the VIDEO button on the remote control. 1. Each time you press the button, the projector switches its input MY SOURCE/ VIDEO COMPUTER DOC.CAMERA port as below. ASPECT AUTO SEARCH BLANK S-VIDEO VIDEO MAGNIFY FREEZE PAGE VOLUME UP ON ● If the VIDEO button is pushed to switch from a signal from the DOWN OFF COMPUTER IN1, COMPUTER IN2 or HDMI port, when TURN KEYSTONE MY BUTTON MUTE 1 2 ON is selected for the AUTO SEA
ページ16に含まれる内容の要旨
Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 11 degrees. This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjustable while pulling up the elevator knob on the same side as it. Holding
ページ17に含まれる内容の要旨
Operating Using the automatic adjustment feature AUTO button Press the AUTO button on the remote control. 1. Pressing this button performs the following. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA For a PC signal ASPECT AUTO SEARCH BLANK The vertical position, the horizontal position, the horizontal MAGNIFY FREEZE PAGE VOLUME UP ON phase and the horizontal size will be automatically adjusted. DOWN OFF And the aspect ratio will be automatically set to default. Make KEYSTONE MY BUTTON M
ページ18に含まれる内容の要旨
Operating KEYSTONE button Correcting the keystone distortions Press the KEYSTONE button on the remote control. A dialog MY SOURCE/ 1. VIDEO COMPUTER DOC.CAMERA will appear on the screen to aid you in correcting the distortion. ASPECT AUTO SEARCH BLANK Use the ▲/▼ cursor buttons to select the AUTO or MANUAL MAGNIFY FREEZE PAGE VOLUME UP ON 2. operation, and press the ► button to perform the following. DOWN OFF KEYSTONE MY BUTTON MUTE (1) The AUTO executes automatic vertical keyston
ページ19に含まれる内容の要旨
Operating Freezing the screen FREEZE button Press the FREEZE button on the remote control. 1. The “FREEZE” indication will appear on the screen (although MY SOURCE/ the indication will not appear when the TURN OFF is selected VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK to the MESSAGE item of the SCREEN menu (36)), and the PAGE VOLUME MAGNIFY FREEZE UP projector will go into the FREEZE mode. ON DOWN OFF To exit the FREEZE mode and restore the screen to normal, KEYSTONE MY BU
ページ20に含まれる内容の要旨
Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, COMPUTER/ SCREEN, OPTION, C.C. and EASY MENU. EASY MENU consists of functions often used, VIDEO STORAGE SEARCH ASPECT AUTO BLANK and the other menus are classified into each purpose. Each of these menus is operated MAGNIFY HOME PAGE UP VOLUME using the same methods. The basic operations of these menus are as follows. ON END PAGE DOWN MUTE OFF Press the MENU FREEZE MY BUTTON KEYSTONE
