ページ1に含まれる内容の要旨
®
V iewSonic
- User Guide
WPG-360
W ireless Presentation Gateway - Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Pyк ов о д ств о по льз ов ателя
- 使用手冊(繁中)
- 使用手冊 (簡中)
Model No. : VS13670
ページ2に含まれる内容の要旨
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protect
ページ3に含まれる内容の要旨
FCC Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This wireless module device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Notice This wireless module device complies with C
ページ4に含まれる内容の要旨
D e c l a ra t i o n o f R oH S C o m pl i a n c e This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentratio
ページ5に含まれる内容の要旨
Copyright Information ® Copyright © ViewSonic Corporation, 2011. All rights reserved. ® ® ™ ® ViewSonic , the three birds logo, OnView , ViewMatch , and ViewMeter are registered ® trademarks of ViewSonic Corporation. ® Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. ® In the interest of continuing
ページ6に含まれる内容の要旨
Table of Contents 1-1 Package Contents ............................................................................................... 1 1-2 Requirements ...................................................................................................... 2 1-3 Highlights............................................................................................................. 3 1-4 Part Names ................................................................................................
ページ7に含まれる内容の要旨
4-8-2 Firmware Upgrade .................................................................................. 38 4-9 Restart............................................................................................................... 39 4-10 Logout ............................................................................................................. 40 Chapter V Appendix ..................................................................................................... 41 5-1 Hardwar
ページ8に含まれる内容の要旨
Chapter I Product Introduction Congratulations on your purchase of ViewSonic Wireless Presentation Gateway WPG-360. This section introduces you to the WPG-360 (referred to as the WPG in this user guide). 1-1 Package Contents (1) WPG-360 (2) IR receiver extension cable (3) AC adapter extension cable (4) VGA cable (1) (5) Remote controller (6) USB cable (7) AC adapter (8) CD-ROM (9) Quick Installation Guide ViewSonic WPG-360 1
ページ9に含まれる内容の要旨
1-2 Requirements PC CPU Intel Pentium 4/1.5 GHz or higher (Recommend Intel Core 2 Duo CPU) Speed 512 MB of RAM or higher Memory (Recommend 1GB of RAM) Windows XP 32 bit or above Operating (Recommend Windows XP 32 bit) System MAC OS X 10.5 and 10.6 (Intel Version only) 100Mbps Wired Fast Ethernet / Network 11Mbps 802.11b wireless Ethernet (Recommend 54Mbps 802.11g wireless Ethernet) USB 1.1 / 2.0 Port USB (Recommend USB 2.0 port) ViewSonic WPG-360 2
ページ10に含まれる内容の要旨
1-3 Highlights Thanks again for choosing the product. This product allows multiple users to connect to the same projector by wired or wireless network and avoiding the hassle of using VGA cable. Features 1. 802.11 b/g/n Wireless compatibility 2. Supports both Wireless and Ethernet connectivity 3. VGA connections 4. Conference control 5. Supports multiple users at the same time with Quarter split screen 6. WPS (Wi-Fi Protected Setup) 7. Output Resolution: 1400x1050, 1280x800, 102
ページ11に含まれる内容の要旨
1-4 Part Names Front View Item No. Description 1 WPS: Single Click when the device is ON. Turn On: Single Click when the device is OFF. 2 ‘POWER’ LED 1 2 - 5 3 ‘LAN’ LED 4 ‘WIRELESS’ LED 5 ‘PC IN’ LED Back View Name Description 12V Connect to A/C adapter / ViewSonic projector’s D/C power outlet LAN 10/100Mbps fast Ethernet port IR IN Connect to IR receiver USB A For mouse function USB B Connect to computer for USB display Side View Audio Out Stereo audio o
ページ12に含まれる内容の要旨
Remote Controller Item No. Description 1 Power Stand-by mode on/off 1 2 Show user list: Single Click. 2 Login WPS: Press and hold for 3 seconds. 2 3 5 7 6 Move up to select user for 3 Prev.user 4 presentation Move down to select user for 4 Next user presentation Go to previous page 5 Page up Go to next page 6 Page down Confirm selected user for 7 Confirm presentation Press battery lid and push it 8 Battery Lid downward by your thumb to open battery com
ページ13に含まれる内容の要旨
1-5 Setup Connecting with your device Start-up instructions Connect one end of the VGA cable to the external display, and the other to WPG VGA-out port locates at back. Connect the Ethernet cable to the LAN port ViewSonic WPG-360 6
ページ14に含まれる内容の要旨
Connect the IR receiver extending cable to ‘IR IN’ port located at the back of WPG, and place the IR receiver at a place where you can point the remote controller to it easily Adjust the antennas so they are perpendicular to the ground. Connect the A/C power adapter to the electrical outlet on the wall. Connect A/C power adapter to the power jack labeled as ‘12V’ at the back of WPG. To fix the product placement, please use two wall mount holes located at the back of the prod
ページ15に含まれる内容の要旨
If you can see this start screen display on projector, indicates WPG-360 is working and all connection cables are correctly connected. Note: DO NOT USE VELCRO STICKER ALONE TO FIX THE PRODUCT ON THE WALL! ViewSonic WPG-360 8
ページ16に含まれる内容の要旨
Chapter II Using WPG 2-1 Check the IP address of WPG When WPG is powered on, check the connected display, you can find the IP address and login code Instruction Page: The IP Address (Wireless / Wired Ethernet) of the device. You can connect to WPG by the IP address of the connection type you’re using (wired / wireless). ViewSonic WPG-360 9
ページ17に含まれる内容の要旨
2-2 Connect to WPG by wireless network Use your computer’s Wireless Network Connection window to access an available wireless network. Select the device from the list. Click Connect. The default device name is WPG-360. Note: If using a wireless client other than Windows, the screen above may look differently. For more details, see your PC user guide. ViewSonic WPG-360 10
ページ18に含まれる内容の要旨
2-3 Manual Network Connection Setting If there’s no DHCP server available on your LAN, please follow the following instructions to set the IP address of the computer. If the operating system of your computer is…. Windows XP - please go to section 2-3-1 Windows Vista / 7 - please go to section 2-3-2 Macintosh - please go to section 2-3-3 ViewSonic WPG-360 11
ページ19に含まれる内容の要旨
2-3-1 Windows XP IP address setup: Click ‘Start’ from windows toolbar locate at bottom, open control panel, then select Network and Internet Connections, click Network Connections, and then double-click Local Area Connection, Local Area Connection Status window will appear, and then click ‘Properties’ Select ‘Use the following IP address’, then input the following settings in respective field: IP address: 192.168.0.x (where x is an integer greater or less than 200, if there’s mor
ページ20に含まれる内容の要旨
2-3-2 Windows Vista / 7 IP address setup: Click ‘Start’ from windows toolbar locate at bottom to select control panel. Click View Network Status and Tasks, then click Manage Network Connections. Right-click Local Area Netwrok, then select ‘Properties’. Local Area Connection Properties window will appear, select ‘Internet Protocol Version 4 (TCP / Ipv4), and then click ‘Properties’ Select ‘Use the following IP address’, then input the following settings in respective field: IP ad
