ページ1に含まれる内容の要旨
®
ViewSonic
- User Guide
- Guide de l’utilisateur
PJD6531w
DLP Projector
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
IMPORTANT: Please read this User Guide to obtain important information on install-
- 사용자 안내서
ing and using your product in a safe manner, as well as registering your product for
future service. Warranty information contained in this User Guide will describe your
ページ2に含まれる内容の要旨
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
ページ3に含まれる内容の要旨
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety
ページ4に含まれる内容の要旨
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0.
ページ5に含まれる内容の要旨
Copyright Information © ® Copyright ViewSonic Corporation, 2010. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
ページ6に含まれる内容の要旨
Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recomme
ページ7に含まれる内容の要旨
CONTENTS Introduction ..................................................................................5 Projector Features .......................................................................................................5 Package Contents .......................................................................................................6 Projector Overview ......................................................................................................7 Using the Product .......
ページ8に含まれる内容の要旨
Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: ® Single chip 1.651cm / 0.65" Texas Instruments DLP technology WXGA (1280 x 800 pixels) Auto image re-sizing (Auto-Sync.) to 1280 x 800 full screen with scaling compression compatibility for VGA, SVGA, XGA, SXGA and WXGA ® Compatibility with Macintosh computers Compatibility
ページ9に含まれる内容の要旨
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries Projector Carrying Case VGA Cable (D-SUB to D- ViewSonic CD Quick Start SUB) Wizard Guide Optional accessories RS232 cable RGB to component adapter P/N: J2552-0208-00 P/N: J2552-0212-00 Contact you dealer immediately if any items are missing, appear damaged, or if the unit does not work. Save the original shipping carton and Packing mat
ページ10に含まれる内容の要旨
Projector Overview Front View 11 10 9 8 7 1 2 3 4 5 6 Lens cap Speaker 1 7 Elevator button Focus ring 2 8 Lens cap strap Zoom ring 3 9 Projection lens Control panel 4 10 Front IR remote control sensor Lamp cover 5 11 Ventilation holes (intake) 6 EN-7
ページ11に含まれる内容の要旨
Rear View 2 1 3 4 5 6 Connection ports 1 AC power socket 2 Kensington lock 3 2 Rear IR remote control sensor 4 Ventilation holes (exhaust) 5 Security bar 6 Bottom View 1 2 70.0mm 90.0mm Ceiling mount (M4*6) 1 Tilt-adjustment feet 2 2 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. EN-8 143.0mm
ページ12に含まれる内容の要旨
Using the Product Control Panel LED 9 1 2 3 4 5 8 6 7 4 Power (Power LED indicator) 1 Refer to “LED Indicator Messages”. TEMP (Temperature LED indicator) 2 Refer to “LED Indicator Messages”. LAMP (Lamp LED indicator) 3 Refer to “LED Indicator Messages”. Button Function / Keystone 4 Manually correct distorted images resulting from an angled projection. Four directional buttons 5 Use four directional buttons to select items or make adjustments to your selection. ENTER 6 Enter to sub-menu and con
ページ13に含まれる内容の要旨
Connection Ports 1 2 3 4 5 6 7 8 9 10 11 12 LAN 1 For network control. USB 2 This connector is for firmware update and mouse function support. HDMI 3 Connect HDMI output from video equipment to this jack. VIDEO 4 Connect composite video output from video equipment to this jack. S-VIDEO 5 Connect S-Video output from video equipment to this jack. MONITOR OUT 6 Connect to a computer display, etc. AUDIO OUT 7 Connect to a speaker or other audio input equipment. COMPUTER IN 1 8 Connect image input si
ページ14に含まれる内容の要旨
Remote Control POWER 1 Turn the projector on or off. VGA1 2 Select analog RGB signal from COMPUTER IN 1 terminal. Source 3 Manually select an input source by sequence. Enter 4 Confirmed selections. Keystone+ / - 5 Adjust image distortion caused by tilting the projector. ViewM 6 Switch in between high brightness performance or Accuracy color performance. Freeze Four directional buttons 7 14 Press “Freeze” to pause the screen Use four directional buttons to select items image. Press again to ca
ページ15に含まれる内容の要旨
Installing the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the compartment. 3. Close the battery cover into position. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Make sure the plus and minus terminals are correctly aligned when loading a battery. Keep the batteries out of the reach of children. There is a danger of death by accidental
ページ16に含まれる内容の要旨
Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear Do not point the laser directly to the people's eyes (especially small children). There is a danger of injury to the eyes. The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a position where the rem
ページ17に含まれる内容の要旨
Installation Connecting the Projector USB Cable Composite Video Cable 1 6 VGA Cable (D-Sub to D-Sub) S-Video Cable 2 7 RS-232 Cable Internet Cable 3 8 Audio Cable HDMI Cable 4 9 VGA (D-Sub) to HDTV (RCA) Cable 5 Laptop type Desktop type 2 2 2 3 1 4 8 5 5 4 9 7 6 4 WPG-350 When connecting cable, power cords of both projector and external equipment should be disconnected from AC outlet. The figure above is a sample connection. This does not mean that all of these devices can or must be connect
ページ18に含まれる内容の要旨
Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source. If you are connecting multiple sources to the projector simultaneously, press the SOURCE button on the control panel or the Source button
ページ19に含まれる内容の要旨
Adjusting the Projector Adjusting the Projector Height Tilt-adjustment foot Elevator foot Elevator button The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image: 1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment. 2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height. To avoid damaging the projector, make sure that
ページ20に含まれる内容の要旨
Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. 3.81m / 150” 3.05m / 120” 2.54m / 100” 1.52m / 60” 1.02m / 40” Wide: 1.2m / 47.24” Tele: 1.0m / 39.37” Wide: 1.9m / 74.80” Tele: 1.5m / 59.06” Wide: 3.2m / 125.98” Tele: 2.6m / 102.36” Wide: 3.8m / 149.61” Tele: 3.1m / 122.05” Wide: 4.8m / 188.98” Tele: 3.9m / 153.54” 16 : 10 Screen Screen size Wide Tele Diagonal Projection distance Projection distance minch m inch
