ページ1に含まれる内容の要旨
CONTENTS 1
Before use
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP450E
( )
WITH DOCUMENT IMAGING CAMERA
TLP451E
TLP650E
( )
WITH DOCUMENT IMAGING CAMERA
TLP651E
TXP450
( )
WITH DOCUMENT IMAGING CAMERA
TXP451
TXP650
( )
WITH DOCUMENT IMAGING CAMERA
TXP651
ページ2に含まれる内容の要旨
CONTENTS 2 Before use SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: Laser beam is emitted when the laser button of the remote control is pressed. Do not look from the front of the remote control. Do not face toward a person or to a mirror. The lightning flash with arrowhead symbol, wi
ページ3に含まれる内容の要旨
CONTENTS 3 Before use In the spaces provided below, record the Model and Serial No. located IMPORTANT PRECAUTIONS at the rear of your LCD projector. Model No. Serial No. Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum Retain this information for future reference. protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids,
ページ4に含まれる内容の要旨
CONTENTS 4 Before use IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE 3. Source of Light 1. Read Owner’s Manual ALL WARNINGS AND Do not look into the lens while the lamp is After unpacking this product, read the INSTRUCTIONS GIVEN IN THIS on. The strong light from the lamp may owner’s manual carefully, and follow all the OWNER’S MANUAL AND THOSE cause damage to your eyes or sight. operating and other instructions. MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This
ページ5に含まれる内容の要旨
CONTENTS 5 Before use IMPORTANT SAFETY INSTRUCTIONS 5. Heat 7. Cleaning 9. Overloading The product should be situated away from Unplug this product from the wall outlet Do not overload wall outlets; extension heat sources such as radiators, heat before cleaning. Do not use liquid cleaners cords, or integral convenience receptacles registers, stoves, or other products or aerosol cleaners. Use a damp cloth for as this can result in a risk of fire or electric (including amplifiers) that produce hea
ページ6に含まれる内容の要旨
CONTENTS 6 Before use IMPORTANT SAFETY INSTRUCTIONS 11. Object and Liquid Entry 13. Stack Inhibited 15. Accessories Never push objects of any kind into this Do not stack other equipment on this Do not place this product on an unstable product through openings as they may product or do not place this product on the cart, stand, tripod, bracket, or table. The touch dangerous voltage points or short-out other equipment. product may fall, causing serious injury to a parts that could result in a fir
ページ7に含まれる内容の要旨
CONTENTS 7 Before use IMPORTANT SAFETY INSTRUCTIONS 16. Damage Requiring Service 17. Servicing 19. Safety Check Unplug this product from the wall outlet and Do not attempt to service this product Upon completion of any service or repairs refer servicing to qualified service yourself as opening or removing covers to this product, ask the service technician to personnel under the following conditions: may expose you to dangerous voltage or perform safety checks to determine that the other hazards.
ページ8に含まれる内容の要旨
CONTENTS 8 Before use IMPORTANT SAFETY INSTRUCTIONS 21. Do not carry by the camera arm. 23. Do not move the projector while the arm is still erect. Do not carry the projector by the camera arm. Always store the arm back in position when Doing so can result in damage or injury. moving the projector. Otherwise injury or damage may result. 22. Do not leave documents on the unit for long periods of time while using the document imaging function. Do not leave texts, papers or other documents for proj
ページ9に含まれる内容の要旨
CONTENTS 9 Before use Power supply cord selection If your line voltage is 220 to 240, use one of the following types of cable. Plug configuration Plug type Line voltage EURO 220 – 240V UK 220 – 240V Use a 5A fuse which is approved by ASTA or BSI to BSI362. Always replace the fuse cover after changing the fuse.
ページ10に含まれる内容の要旨
CONTENTS 10 Before use Contents Before use Camera SAFETY PRECAUTIONS ............................................................... 2 Part names and functions of document imaging camera ............. 35 IMPORTANT PRECAUTIONS....................................................... 3 Picture projection with the document imaging camera ................ 37 IMPORTANT SAFETY INSTRUCTIONS ..................................... 4 Overlaying projection .....................................................
ページ11に含まれる内容の要旨
CONTENTS 11 Before use Part names and functions Control panel ON/STANDBY button 21 1 SELECT/ADJUST ON To turn the projector on or off. ON/STANDBY MENU ENTER INPUT LAMP MENU button 27 2 Main unit TEMP To display or close the menu. SELECT/ADJUST button 28 3 ( / / / ) 1 2 3 4 5 6 7 8 To select items or adjust values on the menu. ENTER button 30 4 Lens cover To enter your selection on the menu. Zooming ring 21 INPUT button 21 5 Projection lens Focusing ring 21 To select the input source. O
ページ12に含まれる内容の要旨
CONTENTS 12 Before use (Continued) Left side Right side 1 2 3 4 RS-232C RGB AUDIO RGB AUDIO CONTROL MONITOR OUTPUT RGB INPUT VIDEO INPUT Carrying handle AC IN socket S-VIDEO VIDEO L - AUDIO -R 19 Open to carry the projetor. Rear side CONTROL connector 17 49 1 To connect a computer to control the projector. MONITOR OUTPUT connectors 2 (RGB output, AUDIO output) 17 Speaker To connect to a monitor or audio equipment. Infrared remote sensor RGB INPUT connectors (RGB input, AUDIO input) 3 16 To conn
ページ13に含まれる内容の要旨
CONTENTS 13 Before use (Continued) AVOID EXPOSURE-LASER Location of the labels RADIATION IS EMITTED FROM THIS APERTURE REAR Remote control MADE IN JAPAN AUTO SET ON/STANDBY KEYSTONE MARKER LASER POINTER PJ RAYONNEMENT LASER CAUTION NE PAS REGARDER DANS LE FAISCEAU Caution - use of controls or adjustments or L-CLICK R-CLICK MENU ENTER LASER RADIATION APPAREIL A LASER DE CLASSE 2 RGB VIDEO CAMERA LONGUEUR D'ONDE: 645nm DO NOT STARE INTO BEAM performance of procedures other than those RESIZE RESET
ページ14に含まれる内容の要旨
CONTENTS 14 Before use MUTE button 23 16 (Continued) To cut off the picture and sound temporarily. L-CLICK button* / MENU button 26 28 6 CALL button 23 • To left-click.* 17 Laser emission part • To display or close the menu. To display the current input source and signal status information. RGB button 21 7 AUTO SET ON/STANDBY To select the RGB input. KEYSTONE 1 9 Installing batteries RESIZE button 24 8 10 MARKER LASER To change the picture size. 1) Open the cover. 2 POINTER ON/STANDBY button
ページ15に含まれる内容の要旨
CONTENTS 15 Before use Notes Remote control operation (Continued) • The remote control may not operate when Point the remote control at the infrared there is sunlight or other strong light such as Notes a fluorescent lamp shining on the remote remote sensor and press a button. Using batteries incorrectly can cause them to sensor. Front side Rear side leak or burst. Strictly observe the following. • Operate the remote control from a position • Install the batteries with their + and – ends where t
ページ16に含まれる内容の要旨
CONTENTS 16 Connections and installation Connections Connecting an IBM PC or compatible computer (DOS/V) Connecting a Macintosh computer Check that the power for the projector and computer is off before • Attach the supplied adapter for Macintosh computers. connecting the cables. • Check that the power for the projector and computer is off before connecting the cables. Connect when you Laptop Desktop want to view a picture computers computers Laptop Desktop on the computer monitor. computers c
ページ17に含まれる内容の要旨
CONTENTS 17 Connections and installation (Continued) Connecting video equipment Output terminals Check that the power for the projector and computer is off before Check that the power for the projector and computer is off before connecting the cables. connecting the cables. (not supplied) To C (P ) output R R To CB(PB) output Audio cable (not supplied) RS-232C RGB AUDIO RGB AUDIO CONTROL MONITOR OUTPUT RGB INPUT To Y output To audio output R (red) VIDEO INPUT To audio output L S-VIDEO VIDEO
ページ18に含まれる内容の要旨
CONTENTS 18 Connections and installation Floor-mounted front projection Floor-mounted rear projection Projector placement Viewing a picture projected on the front of Viewing a picture projected through the the screen from a floor. back of the screen from a floor installation. There are four ways of installing this projector Translucent screen as shown right. This section explains the standard case of the floor-mounted front projection. Viewer Viewer CAUTION • When a ceiling mount is required, pl
ページ19に含まれる内容の要旨
CONTENTS 19 Connections and installation (Continued) Adjust the distance between Connect the power cord. 2 3 the lens and the screen. • Insert one end in the AC IN socket on the projector. The projection size depends on the Place the projector on a steady, 1 • Insert the other end in a wall outlet. distance between the lens and the level surface such as a table. screen. Point the projector squarely at the screen Adjust the projection size by changing the for the best possible picture. distances
ページ20に含まれる内容の要旨
CONTENTS 20 Connections and installation 3) To put the foot adjuster back, hold down How to use the foot adjuster (Continued) the foot adjuster release button and The tilt of the projector can be adjusted using lower the front slowly. Notes the foot adjuster. The foot adjuster will put back. • When the projector is moved from a cold 1) Lift the front of the projector until a tilt location to a warm location, or when the Note angle desired is obtained and hold down ambient temperature in the proj
