ページ1に含まれる内容の要旨
Multimedia Projector
MODEL PLC-XP200L
✽ Projection lens is optional.
Owner’s Manual
ページ2に含まれる内容の要旨
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Functionally Rich ◆ Multilanguage Menu Display This projector has many useful functions such Operation menu is available in 12 languages; as lens shifting, ceiling and rear projection, English, German, French, Italian, S
ページ3に含まれる内容の要旨
Table of Contents Features and Design . . . . . . . . . . . . . . . . 2 Computer Input . . . . . . . . . . . . . . . . . . 38 Computer System Selection 38 Table of Contents . . . . . . . . . . . . . . . . . . 3 Auto PC Adjustment 39 To The Owner . . . . . . . . . . . . . . . . . . . . . 4 Manual PC Adjustment 40 Safety Instructions . . . . . . . . . . . . . . . . . 5 Image Level Selection 42 Air Circulation 6 Screen Size Adjustment 43 Installing the Projector in Proper Directions 7 Video Inpu
ページ4に含まれる内容の要旨
To The Owner Before installing and operating the projector, read this Safety Precaution manual thoroughly. WARNING: ● THIS APPARATUS MUST BE EARTHED . The projector provides many convenient features and functions. Operating the projector properly enables ● T O REDUCE THE RISK OF FIRE OR you to manage those features and maintains it in good ELECTRIC SHOCK, DO NOT EXPOSE THIS condition for many years to come. APPLIANCE TO RAIN OR MOISTURE . Improper operation may result in not only shorte
ページ5に含まれる内容の要旨
Safety Instructions This projector should be operated only from the type of power All the safety and operating instructions should be read before source indicated on the marking label. If you are not sure of the product is operated. the type of power supplied, consult your authorized dealer or local power company. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before Do not overload wall outlets and extension cords as this
ページ6に含まれる内容の要旨
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. IMPORTANT! To ensure reliable operation of the product and to protect it from overheating, these openings must not Filter Maintenance!! be blocked or covered. The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the CAUTION housing and the filter is located in the intake vents to Hot air is exhausted from
ページ7に含まれる内容の要旨
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up. ✔Note: • T o in ver se or rever se the image, set t
ページ8に含まれる内容の要旨
Safety Instructions Moving the Projector Use the handle grip when moving the projector. Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it into a suitable case to protect the projector. CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not tran
ページ9に含まれる内容の要旨
Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
ページ10に含まれる内容の要旨
Part Names and Functions q Indicators e Front w Top Cover q w e Top Cover Release Button r Infrared Remote Receiver (Front) t Projection Lens (optional) y Light-Block Sheet u Adjustable Feet i Air Intake Vent o Filter Cover !0 Lamp Cover !1 Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. r t y u i o !0 !2 Terminals and Connectors !3 Infrared Remote Receiver (Back) !1 !4 Power Cord Connector !2 !3 Back !5 Optional Parts Attach
ページ11に含まれる内容の要旨
Part Names and Functions Rear Terminal q w e !0 o i r t u y y USB CONNECTOR (Series B) q COMPUTER INPUT TERMINAL (DIGITAL) Use this connector when controlling a computer Connect the computer output digital signal to this with the remote control of the projector. Connect terminal. The HDTV (HDCP compatible) signal can the USB terminal of your computer to this also be connected (pp.22-23). connector with the supplied USB cable (p.22). w COMPUTER INPUT TERMINAL (ANALOG) Connect the computer
ページ12に含まれる内容の要旨
Part Names and Functions Rear Terminal !3 ✽ !2 !1 !1 MONITOR OUT TERMINAL This terminal can be used to output the incoming analog RGB signal from INPUT 1-3 terminal to the other monitor (pp.22-23). !2 AUDIO MONITOR OUTPUT j ACK This jack outputs the audio signal from computer or video equipment to external audio equipment (p.24). !3 INFRARED REMOTE RECEIVER (Back) The infrared remote receiver is also located in the front (pp.10, 16). ✽ Kensington Security Slot This slot is for a Kensing
ページ13に含まれる内容の要旨
Part Names and Functions Side Control and Indicators Side Control Indicators (on the top panel) q i w u e y o r !0 !1 t !2 q ON/STAND-By button i POWER indicator Turn the projector on or off (pp.26–27). – Light when in stand-by mode and during operations. w INPUT button – Blink in the Power management mode (p.56). Select an input source (pp.35–37). o LAMP/ indicator SHUTTER e MENU button Light red during operations. Open or close the On-Screen Menu (p.28). Light blue when the shutter is c
ページ14に含まれる内容の要旨
Part Names and Functions Remote Control e w q r t !3 y !4 u !2 i !1 o !0 q STAND-By button !0 MOUSE POINTER button Turn the projector off (p.27). Move a pointer of the projector or a pointer for wireless mouse operation (p.34). w WIRED REMOTE jack Connect the remote control cable (not supplied) to !1 SELECT button this jack when using as a wired remote control. – Execute the selected item (p.28). – Expand or compress the image in the Digital e SIGNAL EMISSION indicator zoom mode (p.44).
ページ15に含まれる内容の要旨
Part Names and Functions Remote Control @6 !5 @5 !6 @4 @7 For PIN code and remote @3 control code. !7 @2 !8 @1 !9 @0 @3 FREEZE button !5 D .ZOOM button Freeze the picture on the screen (p.33). Select the Digital zoom +/- mode and resize the image (p.44). @4 P-TIMER button !6 INPUT 1 – 3 buttons Operate the P-timer function (p.33). Select an input source (INPUT 1 – INPUT 3) (pp.35–37). @5 R-CLICK button Act as the right mouse button for wireless mouse !7 KEySTONE button operation (p.34
ページ16に含まれる内容の要旨
Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries into Replace the compartment lid. the compartment. compartment lid. 1 2 3 Press the lid downward and Two AAA size batteries slide it. For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operation, please observe the following precautions : ● Use two (2) AAA or LR03 type alkaline batteries. ● Always replace batteries in sets.
ページ17に含まれる内容の要旨
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 55. Press and hold the MENU and a num
ページ18に含まれる内容の要旨
Installation Adjustable Feet Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 15, 33, 44, 48). ADJUSTABLE FEET 18
ページ19に含まれる内容の要旨
Installation Lens Installation When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Top cover release button Removing the lens Top cover Shift the lens to the center position by using the 1 Lens shift function (p. 30). Turn off the projector and unplug the AC power 2 cord. While pressing the top cover release button on 3 the top cover, slide the top cover t
ページ20に含まれる内容の要旨
Installation Attaching the lens to the projector Turn off the projector and unplug the AC power 1 cord. Fit the lens to the projector. Make sure that the 2 lens is fully inserted to the projector. Push the Lens Lock Lever downward. Make sure 3 that the lens is properly locked. Slide the light-block sheet in the groove to mount. 4 While pressing the top cover release button on the 5 top cover, slide the top cover back to the projector. Groove NOTES ON LENS INSTALLATION ● Do not touch or re
