ページ1に含まれる内容の要旨
PJ-Net Organizer
Model No. POA-PN01
Preparation
Installation
Basic Setting and Operation
Controlling the Projector
Controlling the Multi-Projectors
Controlling External Equipment
Appendix
INSTALLATION and OPERATION of the PJ-Net
Organizer
This PJ-Net Organizer is an optional product to control
and set up a projector via a network. Attach this prod-
uct to the projector and connect a network cable. By
accessing the connected projector using the web
browser on your computer, the projector can be c
ページ2に含まれる内容の要旨
Preparation Compliances Federal Communication Commission Notice This equipment has been tested and found to comply SANYO POA-PN01 with the limits for a Class B digital device, pursuant to Tested To Comply part 15 of the FCC Rules. These limits are designed With FCC Standards to provide reasonable protection against harmful interference in a residential installation. This equip- FOR HOME OR OFFICE USE ment generates, uses and can radiate radio frequency energy and, if not installed and used in ac
ページ3に含まれる内容の要旨
Preparation Expression/Abbreviation The following abbreviations may appear in this manual: ● Windows 95, Windows 98, Windows 2000, Windows Me, Windows XP, Windows NT4.0 ➜ Windows ● Macintosh, Power Macintosh ➜ Macintosh ● Mac OS 8 or later ➜ Mac OS In some cases, the “PJ-Net Organizer” is explained as “this product” or “Network Board” in this manual. The word “projector” found in this manual means “projector provided with PJ-Net Organizer” unless otherwise noted. Use of this manual This manual
ページ4に含まれる内容の要旨
Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Flow of installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Name and function of each part . . . . . . . . . . . . . . . . . . . . . . . . . .11 [1] Mounting . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Contents Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Screen Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 How to set the Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Cancel the timer . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Preparation Features Web Management function With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer. Power ON ! E-Mail Alert function Projector (PJ-Net Organizer) sends messages to the registered e-mail addresses when a lamp abnormality or power failure occurs with the projector. In this message, it describes how to solve the cause of the p
ページ7に含まれる内容の要旨
Features Multi-control function A single computer can control and set up the multiple computers at the same time. 3F Meeting Room 5F Show Room Automatic On/Off using Timer function Automatically turn on or off the projectors at specified date/day and time by using the clock function. I am ready to turn ON, and select Input 3 (Video) Now it's 11:30 Control port ready for external equipment via network This product provides a serial port (RS-232C) for controlling external equipment. By connecting
ページ8に含まれる内容の要旨
Preparation Operating Environment To perform the management and setting up the projector using this product, the envi- ronment described below is required. Operating System Windows 95 / Windows 98 / Windows 2000 / Windows Me / Windows NT / Windows XP Mac OS 8.0 or later Network Network must handle Ethernet correctly and accept TCP/IP protocol. Computer The computer must provide a 10Base-T or 100Base-TX network card. Web browser application* ● Microsoft Internet Explorer version 5.0 or later ● Ne
ページ9に含まれる内容の要旨
1 Installation PJ-Net Organizer 9 OWNER’S MANUAL ENGLISH
ページ10に含まれる内容の要旨
Installation Flow of installation The following are instructions for attaching this product to the projector and connect- ing it to the network. Please review the entire procedure to become familiar with it. 1 Check package (p.11) Please check the contents of a package. This product contains a network board and an owner’s manual (this manual). Also please check the name and function of each part. Installation (p.12-14) 2 1. Mount this product onto the projector. 2. Connect the LAN cable and join
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
Connection of LAN cable [2] Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) strait cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distribute the network cable if required. 1 Disconnect the AC plug from the projec- tor. 2 Connect the UTP strait cable to the LAN port on the network board. 3 Connect the UT
ページ14に含まれる内容の要旨
▲ Installation [3] Confirmation of network menu activity When installing this product onto the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check chapter “Mounting” on page 12. Turn on the projector and display the menu on the screen. Confirmation of network setting menu [PJ-Net Organizer] Using the pointers on the remote control handset or on the projector, select the PJ-Net
ページ15に含まれる内容の要旨
Network configuration [4] Network configuration When you connect a projector to a network, the network number of projector must be the same as the network you intend to connect. You should configure projector’s network first. Make sure that the projector is connected to the network correctly. There are 2 ways to configure the network, by using the projector’s menu [A], or by using the computer [B]. Refer to the chart below and use the method you prefer. Procedure of Connecting the projector to t
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
ページ18に含まれる内容の要旨
Installation Configure the network with the computer B This example explains how to set the following configuration. IP Address : 192.200.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.200.1.1 DNS : 0.0.0.0 The default network configuration is set as follows. IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gateway : 0.0.0.0 DNS : 0.0.0.0 Make sure that the projector is connected to the network and then connect the AC cord to the outlet. 1 1 Temporarily* set up your computer
ページ19に含まれる内容の要旨
Network configuration 2 Configure the network of the projector by using the web browser. 1. Enter the IP address of the projector as the URL. The login page will be dis- played and login. For further information, please see chapter “2: Basic Setting and Operation” on page 25. 2. Configure the network through the setting page on the browser. For further information, please see chapter “Network Configuration” on page 30. Completing of installation Now the installation is completed. The IP address
ページ20に含まれる内容の要旨
Installation Configure the network of computer When you use the projector through the network, the IP address of the pro- jector must be the same IP network number of the existing network. Also it is required to use the same IP network number of the computer to set up the projec- tor. In the network included with the gateway (router), it must be used with the IP network number specified by the gateway (router). Configure the computer's network by following steps: Windows 98/85/Me This example ex
