ページ1に含まれる内容の要旨
DATA PROJECTOR
V-1080/V-807
User’s Manual
IMPORTANT
Digital Light Processing, DLP, Digital Micromirror Device and DMD are all trademarks of Texas Instru-
ments.
Windows 98, Windows 95, and Windows 3.1 are registered trademarks in the United States and other
countries of Microsoft Corporation.
IBM is a registered trademark of International Business Machines Corporation.
Macintosh and MAC are trademarks of Apple Computer Inc.
Other names of companies and products mentioned are trademarks and regis
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Precautions Please read this manual carefully before using your PLUS V-1080 / V-807 Data Projector and keep the manual handy for future reference. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Important Safeguards These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings. Installation •For best results, use the unit in a darkened room. • Place the unit on a flat, level surface in a dry area away from dust and moisture. • Do not place the unit in direct sunlight, near heaters or heat radiating appliances. • Exposure to direct sunlight, smoke or steam can harm internal co
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit and walls. • Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If something sho
ページ5に含まれる内容の要旨
Major Features Book-sized, lightweight (at about 0.9 kg/2.0 lbs) and small high-inten- sity mobile projector TM DMD and the synergistic effects of our own optical design serve to improve the optical utilization TM efficiency. The three light sources (RGB) required in color expression are reproduced with one DMD . These factors have enabled a design that offers both high intensity and small size/lightweight fea- tures. Sharp, clear picture The absence of RGB color infidelity and the inconspicuous
ページ6に含まれる内容の要旨
Table of Contents Preparation and Background Knowledge IMPORTANT SAFETY INFORMATION ............................................................................ E-2 Major Features ................................................................................................................. E-5 Table of Contents ............................................................................................................. E-6 Checking the Supplied Accessories ....................................
ページ7に含まれる内容の要旨
Table of Contents Menu Operations Menu Operation Method................................................................................................ E-37 Names and Functions of the Parts ............................................................................ E-37 Names and Functions of the Remote Control Buttons that Operate Via a Menu ...... E-37 Names and Functions of the Main Unit Buttons Used in Menu Operation ................ E-38 Names and Functions of Menu Screen Parts............
ページ8に含まれる内容の要旨
Checking the Supplied Accessories Remove the main unit and the accessories from the box and check that the following items are included. Remote control Power cable (1.8 m / 5.9 feet) [1] (includes one button battery) [1] This power cable supplies power to the unit. See Page E-24 This controls the projector. Please remove the transportation about connections. insulation sheet at time of purchase. (See Page E-13.) DVI / Mini D-sub 15-pin conversion cable RGB signal cable (19 cm / 0.6 feet) [1] (Mi
ページ9に含まれる内容の要旨
Checking the Supplied Accessories Audio cable (2.5 mm diameter plug / RCA pin Soft pouch (for projector and accessories) [1] plug, 1.5 m / 4.9 feet) [1] This pouch is used when storing or moving the projector. The This cable is used with equipment that has phono type audio pouch is made up of two portions that are joined by hook-and- jacks. Connections are described on Page E-23. loop tape to form a single item. The pouch can be separated No. 772706000 into two pieces. Accessories Projector User
ページ10に含まれる内容の要旨
STATUS POWER MENU POWER SOURCE AUTO QUICK MENU AUDIO VIDEO Names of the Main Unit Parts STATUS indicator [E-61] POWER indicator [E-24] POWER button [E-24] MENU button [E-38] SOURCE button [E-28] AUTO button [E-28] QUICK MENU button [E-32] Speaker Remote control sensor [E-14] Exhaust vents Exhaust vents Front adjuster Ventilation slots Remote control sensor Lens Front adjuster button [E-27] (There is also one on the left side.) Focus ring [E-27] Lens cap To protect the lens, attach the lens cap w
ページ11に含まれる内容の要旨
SOURCE AUTO QUICK MENU PC AUDIO VIDEO STATUS POWER MENU POWER SOURCE AUTO QUICK MENU AUDIO VIDEO PC Names of the Main Unit Parts AUDIO jack [E-23] VIDEO jack [E-21, 22] PC connector [E-18,19,22] Ventilation slots Built-in security slot (See description below.) AC IN connector [E-24] Rear adjuster [E-27] Ventilation slots Lamp cover [E-67] Front adjusters [E-27] Built-in Security Slot This security slot supports the MicroSaver Security System manufactured by Kensington Microware Inc. E-11
ページ12に含まれる内容の要旨
CANCEL HKSTN Names of the Remote Control Parts Infrared transmitter [E-14] POWER button [E-24] PIP button [E-31] (Displays the picture associated FREEZE button [E-31] ON POWER OFF with the VIDEO connector as a (Freezes moving pictures) smaller picture within the display FREEZE MUTE PIP screen associated with the PC connector) MUTE button [E-31] DIGITAL RGB YPbPr (Temporarily cancels the Buttons used for input selec- VIDEO S-VIDEO YCbCr video and audio) tion [E-28] DIGITAL button, RGB button, QUI
ページ13に含まれる内容の要旨
M M CR2025 CR2025 n n O O 2 2 - - L L i i C C Preparing the Remote Control Button Battery Replacement Using the remote control for the first time The battery compartment is fitted with a transportation insulation sheet at the time of shipping. Pull out the sheet and remove it. The remote control is now ready for use. Replacement Method Insert the tip of a ballpoint pen or some other pointed object into the hole of the 1 battery holder, then pull out to open. Remove the old battery and install a
ページ14に含まれる内容の要旨
4m / 13.1 feet 4m / 13.1 feet Preparing the Remote Control Remote Control Range Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate. Reception of the remote control signal should generally be possible within the range illustrated below. Remote control infrared transmitter Remote control sensor 30˚ 30˚ Side View 7m / 23 feet 50˚ 50˚ 7m / 23 feet Remote control sensor Remote control infrared Top View transm
ページ15に含まれる内容の要旨
The Procedure Up to Projecting to the Screen Perform setup adjustments in the following order. 1 Position the projector See "Projection Distance and Screen Size" on Pages E-16 and E-17. Determine the locations to set up the screen and the projector. 2 Connect the video equipment and personal computer Connect your equipment to the projector. When the personal computer has a DVI connector or a mini D-sub 15-pin connector See "Connections with PC Connectors" on Page E-18. When the video equipment h
ページ16に含まれる内容の要旨
Placement Guide ● Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. ● The projection distance over which focussing is adjustable is 1.2 m (3.9 feet) to 6.9 m (22.6 feet) from the front of the main unit lens for V-807 and 1.2 m (3.9 feet) to 6.6 m (21.7 feet) for V-1080. The projector should be placed within this range. ● Please see the projection distance tab
ページ17に含まれる内容の要旨
Placement Guide V-1080 Screen Size and Projection Distance Height from center of lens to top edge of the projection m (feet) 4.0(13.1) 200" 3.5(11.5) 180" 150" 3.0(9.8) 2.5(8.1) 120" 100" h1 2.0(6.6) 80" 1.5(4.9) 60" 40" 1.0(3.3) 36" 0.5(1.6) h2 17.2˚ Projection angle 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 (m) 0 (1.6) (3.3) (4.9) (6.6) (8.1) (9.8) (11.5) (13.1) (14.8) (16.4) (18.0) (19.7) (21.3) (23.0) (feet) Projection Distance Height from center of lens to Center of lens botto
ページ18に含まれる内容の要旨
Connecting Personal Computers and Video Equipment ● Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equipment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater. Connections with PC Connectors Please check the following matters before making connectio
ページ19に含まれる内容の要旨
Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin Connector * Make the connection to the projector's PC connector and the mini D-sub 15-pin connector through the use of a DVI/mini D-sub 15-pin conversion cable. * When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs and fasten to the connector of the main unit. * Switch the input selection of the projector to "Analog RGB". Personal computer AUDIO VIDEO PC D
ページ20に含まれる内容の要旨
Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while per- forming the following procedure. Check whether a signal is being sent from the notebook
