ページ1に含まれる内容の要旨
DATA PROJECTOR
- -
U5 632h/U5 732h
- -
U5 532h/U5 512h
User’s Manual
( )
U5-532h/U5-512h
( )
U5-632h
( )
U5-732h
IMPORTANT
* DLP™ (Digital Light Processing) and DLP™ chip are registered trademarks of Texas Instru-ments Incorporated (U.S.A.).
* DLP™ chip is an ultra-precise part developed by Texas Instruments (U.S.A.) which takes the place of liquid crystal (in
the projector).
* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).
* S-VGA is
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Precautions Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future reference. This User’s Manual applies to the U5-632h, U5-732h, U5-532h and U5-512h Data Projectors. The resolution differs from model to model, and not all models have the high brightness black/white mode or the PC mouse function. This User’s Manual describes the U5-632h (the full-function model). Also note that the included remote control unit dif
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Important Safeguards These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings. Installation • For best results, use the unit in a darkened room. • Place the unit on a flat, level surface in a dry area away from dust and moisture. • Do not place the unit in direct sunlight, near heaters or heat radiating appliances. • Exposure to direct sunlight, smoke or steam can harm internal c
ページ4に含まれる内容の要旨
Major Features Lightweight high-intensity projector The synergy of the DLP™ (Digital Light Processing) display system and our own optical design serve to improve the optical utilization efficiency. The three primary colors (RGB) required in color expression are reproduced with one DLP™ chip. These factors have enabled a design that offers both high intensity and small size/lightweight features. Sharp, clear picture The DLP™ display system affords RGB color fidelity and inconspicuous gaps bet
ページ5に含まれる内容の要旨
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................................... E-2 Major Features ....................................................................................................................... E-4 Table of Contents ................................................................................................................... E-5 Checking the Supplied Accessories ......................................................
ページ6に含まれる内容の要旨
Table of Contents Color ...................................................................................................................................... E-49 Quick Color Adj. ........................................................................................................ E-49 Gamma ..................................................................................................................... E-49 Color Temp. ....................................................................
ページ7に含まれる内容の要旨
Checking the Supplied Accessories Remove the main unit and the accessories from the box and check that the following items are included. Wireless remote control unit with laser pointer [1] / S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1] Size AAA batteries [2] Applicable Projector: U5-632h/U5-732h/U5-532h Applicable Projector: U5-632h/U5-732h This cable is used in the connection of video equipment that This controls the projector. (See Page E-11.) has an S-video connector. Connections a
ページ8に含まれる内容の要旨
Checking the Supplied Accessories USB cable (type A, 2 m / 6.6 feet) [1] Applicable Projector: U5-632h/U5-732h Used to perform mouse operations on a computer using the projector’s remote control unit. Connections are described on Page E-35. No. 777707000 * The wireless remote control is sold separately for the U5- 532h and U5-512h. VR-100 remote mouse set (sold separately) (Ordering code: 28-052) Storage case (for projector and accessories) [1] HOW TO PUT THE PROJECTOR INTO THE STORAGE CASE Appl
ページ9に含まれる内容の要旨
Names of the Main Unit Parts Applicable Projector: U5-632h Zoom ring [E-26] Focus ring [E-27] Exhaust vents Ventilation slots Remote control Adjuster button [E-27] sensor [E-12] (Also on opposite side) Lens Applicable Projector: U5-732h Zoom ring [E-26] Lens cap Remove before use. Attach the lens cap after use to Exhaust protect the lens. vents Remote control sensor [E-12] Focus ring [E-27] Lens Lens cap Ventilation slots Applicable Projector: U5-532h/U5-512h Zoom ring [E-26] Exhaust vents Focus
ページ10に含まれる内容の要旨
STATUS STANDBY STANDBY AUTO SOURCE RGB S VIDEO VIDEO AUDIO MOUSE PC CONTROL Names of the Main Unit Parts STATUS STATUS indicator [E-23, 61] STANDBY STANDBY indicator [E-23, 61] STANDBY button [E-23] STANDBY AUTO button [E-28] AUTO SOURCE SOURCE button [E-28] Remote control sensor [E-12] AC IN connector [E-23] Speaker Built-in security slot Ventilation slots (See description below.) Applicable Projector: U5-632h/U5-732h/U5-532h MOUSE connector [E-35] AUDIO connector [E-21] PC CONTROL PC CONTROL c
ページ11に含まれる内容の要旨
Names of the Remote Control Parts/Preparing the Remote Control There are two types of remote control units included with the U5 series of projectors. Both types are described below. Refer to the description (and diagram) for the remote control unit included with your projector. Precautions Handling of the Remote Control * Do not drop the remote control or handle it inappropriately. * Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry imm
ページ12に含まれる内容の要旨
CR2025 Names of the Remote Control Parts/Preparing the Remote Control Names of Parts/Preparing the Remote Control Unit Applicable Projector: U5-532h/U5-512h Included with the U5-532h and U5-512h Names of the Remote Control Parts 1. Infrared transmitter [E-12] 9. Buttons used for menu operations 1 9 [E-40] 2 2. STANDBY button [E-23, 25] The , , and buttons are the This button is used to switch ON the power select (, , and ) buttons. 3 STANDBY and set the unit to the STANDBY mode. MENU 10 1
ページ13に含まれる内容の要旨
The Procedure Up to Projecting to the Screen Perform setup adjustments in the following order. 1 Position the projector Determine the locations to set up the screen and the projector. See “Placement Guide” on Page E-14. 2 Connect the video equipment and personal computer Connect your equipment to the projector. When making connections with the personal computer’s RGB connector, see “Connections with Personal Computer” on Page E-17. When making connections with the video equipment’s video connect
ページ14に含まれる内容の要旨
300" h1 250" h2 200" 180" 150" 120" 100" 80" 60" 38.4" Placement Guide • Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. • Refer to the projection distance table for your projector model. • When suspending the projector from the ceiling, change the projection method. See “Vertical Flip” on E-53. U5-632h Screen Size and Projection Distance • The projection d
ページ15に含まれる内容の要旨
300" h1 250" h2 200" 150" 120" 100" 80" 40" 60" 33" 27" STAT U S STAND BY STANDBY AUT O SOURCE RGB S V D IEO V D IEO AUD O I MOUSE P C CON T ROL Placement Guide U5-732h Screen Size and Projection Distance • The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 13.81 m (45.31 feet). The projector should be placed within this range. Screen Size Designation (Inches) Height from center of lens to top edge of the projection Height from center of lens to bottom edge of th
ページ16に含まれる内容の要旨
300" h1 250" h2 200" 180" 150" 120" 100" 80" 60" 40" 27.6" Placement Guide U5-532h/U5-512h Screen Size and Projection Distance • The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 13.36 m (43.83 feet). The projector should be placed within this range. Screen Size Designation (Inches) Height from center of lens to top edge of the projection Height from center of lens to bottom edge of the projection Unit: m (feet) Width Lens surface of the main unit Screen size (D
ページ17に含まれる内容の要旨
Connecting Personal Computers and Video Equipment Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equip- ment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater. Connections with Personal Computer Please check the following before making connections w
ページ18に含まれる内容の要旨
Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure. Check whether a signal is being sent from the notebook c
ページ19に含まれる内容の要旨
Connecting Personal Computers and Video Equipment Connections with Composite Signals Applicable Projector: U5-632h/U5-732h/U5-532h Video Equipment with VIDEO Connectors • The input setting of the VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project, please change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] → [Input Format] → [Video]. See “Input Format” on Page E-56. Video Equipment with S-VIDEO
ページ20に含まれる内容の要旨
Connecting Personal Computers and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector • The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo- nent” using the menu sequence of [Setup] → [Input Format] → [RGB]. See “Input Format” on Page E-56. • When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being gree
