ページ1に含まれる内容の要旨
Mounts by
A division of David Engineering & Mfg. Inc.
Model
UPM51 PROJECTOR MOUNT
Thank you for purchasing the PDR Projector mount with the exclusive “Bayonet locking system”.
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference.
All PDR mo
ページ2に含まれる内容の要旨
INSTALLATION LOCATION WARNING The ceiling where the mount is to be installed must be capable of long-term support of the total load of the projector and mount. Measures should be taken to ensure sufficient strength to withstand the force of earthquakes, vibrations and other external forces. Note: Incorrect installation can cause the projector mount to fall and cause injury. Total load of the mount (projector + Mount) Maximum weight - 40 Lbs ( 10Kg.)
ページ3に含まれる内容の要旨
ADAPTER PLATE HARDWARE Leveling barrels 4 pcs A Fig 1 1/4-20 x 5/8 carriage bolts 4 pcs B G,H,I,J 9/32” x 47/64” Nylon washer 4 pcs C D,E F 4.3 mm x 8.9mm steel washer 4pcs A D C 2.7mm x 6mm steel washer 4 pcs E Black plastic knob 4 pcs F M M6 x 25mm Pan Head Philips machine Screw 4 pcs G B K L M4 x 25mm Pan Head Philips machine Screw 4 pcs H M 3 x 25mm Pan Head Philips machine Screw 4 pcs I M2.6 x 25mm Cheese Head slotted
ページ4に含まれる内容の要旨
1. FASTEN THE PROJECTOR MOUNT TO 1 ½”NPT PIPE 1: The bracket must be secured to a ceiling structure capable of at least (4) times the weight of the projector + mount. 2: Screw the bayonet sub assembly onto the 1 ½” NPT (not supplied). 3: Secure with the locking set screw making sure the sub assembly safety lever is facing the front of the projector. SEE FIG 2 Fig 2 Pipe Not Supplied locking set screw Projector Front Bayonet Sub Assembly safety lever
ページ5に含まれる内容の要旨
3. MOUNT THE PROJECTOR ASSEMBLY TO THE PROJECTOR MOUNT 1: Place the projector assembly into the bayonet slots on the mount (small end into large end) and slide backward until the safety lever engages SEE FIG 4. 2: Adjust the thumb screws to secure the mount to the projector. 3: To remove, loosen the thumb screws and lift the safety lever to slide the unit out. 4: Adjust for best view and tighten all hardware. Fig 4 Bayonet Sub Assembly Safety lever Locking thumb screw Projector a
