ページ1に含まれる内容の要旨
Mounts by
A division of David Engineering & Mfg. Inc.
Model
PMU50 PROJECTOR MOUNT
Thank you for purchasing the PDR Projector mount with the exclusive “Bayonet locking system”.
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference.
All PDR mo
ページ2に含まれる内容の要旨
INSTALLATION LOCATION WARNING The ceiling where the mount is to be installed must be capable of long-term support of the total load of the projector and mount. Measures should be taken to ensure sufficient strength to withstand the force of earthquakes, vibrations and other external forces. Note: Incorrect installation can cause the projector mount to fall and cause injury. Total load of the mount (projector + Mount) Maximum weight - 55 Lbs (25Kg
ページ3に含まれる内容の要旨
PRODUCT SPECIFICATIONS 2.13” 5° 3.26” 30° 5° 5° Ø 15.75” MAX REACH 3
ページ4に含まれる内容の要旨
ADAPTER PLATE HARDWARE Leveling barrels 4 pcs A Fig 1 1/4-20 x 5/8 carriage bolts 4 pcs B 9/32” x 47/64” Nylon washer 4 pcs G,H,I,J C D,E 4.3 mm x 8.9mm steel washer 4pcs F D A C 2.7mm x 6mm steel washer 4 pcs E Black plastic knob 4 pcs F M6 x 25mm Pan Head Philips machine Screw 4 pcs M G B K L M4 x 25mm Pan Head Philips machine Screw 4 pcs H M 3 x 25mm Pan Head Philips machine Screw 4 pcs I M2.6 x 25mm Cheese Head slotted
ページ5に含まれる内容の要旨
1. FASTEN THE PROJECTOR MOUNT TO 1 ½”NPT PIPE 1: The bracket must be secured to a ceiling structure capable of at least (4) times the weight of the projector + mount. 2: Screw the bayonet sub assembly onto the 1 ½” NPT pipe (not supplied). 3: Secure with the locking set screw making sure the sub assembly safety lever is facing the front of the projector. 4: Fine adjustment can be made for rotation by loosening the two screws on the 1 ½’collar and rotating to the desired
ページ6に含まれる内容の要旨
3. ATTACH THE ADAPTER PLATE TO THE PROJECTOR. 1: Start by screwing the leveling barrels ( A ) into the Adjustable arms (K and L). A screwdriver slot is provided in the barrel (A). The barrels only need to be threaded approx. 1/8“ through the bottom of the arm (K and L). If the mounting plane of the projector is not flat, the barrels can be adjusted to make up the difference in height. SEE FIG 1 2: Using the adapter plate ( M ) attach the adjustable arms ( K,L ) with the hardwar
