ページ1に含まれる内容の要旨
Table of Contents
SETUP | Security ............................... 42
Table of Contents ............................1
SETUP | Advanced ............................ 44
Usage Notice ...................................2
SETUP | Network ............................... 45
Safety Information ...............................2
OPTIONS ...........................................50
Precautions .........................................3
OPTIONS | Advanced ........................ 52
Eye Safety Warnings ....
ページ2に含まれる内容の要旨
Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
ページ3に含まれる内容の要旨
Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀■ Warning- To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture. ▀■ Warning- Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow the
ページ4に含まれる内容の要旨
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, c
ページ5に含まれる内容の要旨
Usage Notice Eye Safety Warnings ▀■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features ▀■ XGA (1024x768) Native resolution / WXGA (1280x800) Native resolution ▀■ HD compatible – 1080p support
ページ6に含まれる内容の要旨
Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Projector with lens cap Power Cord VGA Cable Due to different IR Remote Control USB Cable 5m 2 × AAA Batteries applications in each country, some regions may have Documentation : different accessories. User’s Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) STOP
ページ7に含まれる内容の要旨
Introduction Product Overview Main Unit 6 1 2 4 3 6 5 4 7 8 4 4 9 4 10 11 Air Flow 1. Control Panel 7. Input / Output 2. Focus Ring Connections 3. Speaker 8. Power Socket 4. Tilt-Adjustment Feet 9. Security Bar 5. Lens 10. Ventilation (inlet) 6. IR Receiver 11. Ventilation (outlet) 7 English
ページ8に含まれる内容の要旨
Introduction Control Panel 1 2 3 4 LAMP TEMP 11 5 MENU POWER/STANDBY 10 9 8 7 6 1. Source 2. Enter / Help 3. Re-Sync 4. IR Receiver 5. Temp LED 6. Presenter 7. Four Directional Select Keys 8. Power/Standby button and LED 9. Keystone Correction 10. Menu 11. Lamp LED 8 English E C R U O S
ページ9に含まれる内容の要旨
Introduction Input/Output Connections 1 2 3 4 5 6 7 8 9 10 PB/MOUSE HDMI S-VIDEO VIDEO RS-232 AUDIO1-IN VGA-OUT VGA1-IN / YPbPr (VGA1/VGA2) SERVICE 12V OUT RJ-45 MIC AUDIO 2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr DISPLAY AUDIO OUT USB / L R 12V OUT 14 19 18 17 16 15 13 12 11 1. RJ-45 Networking Connector 2. 5pin Mini-USB for interactive function and firmware upgrade 3. HDMI Connector 4. VGA-Out Connector (Monitor Loop-through Output) 5. VGA1-In/YPbPr Connector Monitor loop (PC Analog Signal/Com
ページ10に含まれる内容の要旨
Introduction Remote Control 1. LED Indicator 2. Power On/Off 1 3. Four Directional Select Keys 2 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 12 3 8. Volume +/- 13 4 9. 3D 10. AV mute The interface 14 5 is subject to 11. Video model’s specifi- 15 6 12. PC/Mouse control cations. 13. Mouse Left Click 16 7 14. Enter/Help 17 8 15. Source 16. Keystone +/- 18 9 17. Menu 19 10 18. Brightness 20 19. HDMI 11 20. S-Video 21. Numbered keypad (for password input) 21 22 23 22. Freeze
ページ11に含まれる内容の要旨
Introduction Interactive Pen 1 3 2 4 7 5 8 6 1. Battery Cover 5. Lens 2. Mouse Right Click 6. Nib The interactive 3. Menu 7. Power On/Off pen is optional accessory. 4. Mouse Left Click 8. LED Indicators 1 Warning: 2 • Danger of explosion if battery is incor- 3 rectly replaced. • Replace only with the same or equiva- lent type recom- mended by the Battery Installation: manufacturer. 1. Press firmly and slide the battery cover off. 1 • Dispose of used 2. Install new batteries (AAA). E
ページ12に含まれる内容の要旨
Installation Connecting the Projector +12V Output MOLEX MOLEX 3 3 5 7 2 4 6 10 11 PB/MOUSE HDMI S-VIDEO VIDEO RS-232 AUDIO1-IN VGA-OUT VGA1-IN / YPbPr (VGA1/VGA2) SERVICE 12V OUT RJ-45 MIC AUDIO 2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr DISPLAY Due to the USB / AUDIO OUT L R 1 difference in applications for each country, some regions may 9 have different accessories. 8 (*) Optional accessory Audio Output 1....................................................................................
ページ13に含まれる内容の要旨
Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver S-Video Output 6 4 7 Composite Video Output 8 2 12 5 3 +12V Output PB/MOUSE HDMI S-VIDEO VIDEO RS-232 AUDIO1-IN VGA-OUT VGA1-IN / YPbPr (VGA1/VGA2) SERVICE 12V OUT RJ-45 MIC AUDIO 2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr DISPLAY 1 USB / AUDIO OUT L R 9 Audio Output 10 11 8 Due to the difference in applications 1....................................................................................................Power Co
ページ14に含まれる内容の要旨
Installation Powering the projector On / Off Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 3. Turn on the lamp by pressing “ ” button either on the top of the projector or on the remote. The POWER/STANDBY LED When Power mode will now turn Green. (Standby) is set The startup screen will display in approximately 10 seconds. to Eco (<1W), the VGA output, Audio The first ti
ページ15に含まれる内容の要旨
Installation Powering Off the Projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector. The following message will be displayed on the screen. Press the “ ” button again to confirm otherwise the message will disappear after 15 seconds. When you press the “ ” button for the second time, the projector will display countdown timer and will shut down. 2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the POWE
ページ16に含まれる内容の要旨
Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring 16 English
ページ17に含まれる内容の要旨
Diagonal Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. XGA series: The projector will focus at distances from 1.64 to 12.46 feet (0.5 to 3.8 meters). WXGA series: The projector will focus at distances from 1.64 to 11.15 feet (0.5 to 3.4 meters). Focus Ring Adjusting Projection Image Size XGA series: Projection Image Size from 41.0” to 312.0” (1.0 to 7.9 meters). WXGA series: Projection Image Size from 44.6” to 303.0
ページ18に含まれる内容の要旨
Installation XGA Screen Size W x H Projection Distance (D) Diagonal length Offset (Hd) (m) (inch) (m) (feet) (inch) size of 4:3 Screen Width Height Width Height wide tele wide tele (m) (feet) 40.00 0.81 0.61 31.89 24.02 0.50 0.50 1.64 1.64 0.09 0.30 60.00 1.22 0.91 48.03 35.83 0.80 0.80 2.62 2.62 0.14 0.45 70.00 1.42 1.07 55.91 42.13 0.90 0.90 2.95 2.95 0.16 0.53 80.00 1.63 1.22 64.17 48.03 1.00 1.00 3.28 3.28 0.18 0.60 90.00 1.83 1.37 72.05 53.94 1.10 1.10 3.61 3.61 0.21 0.67 100.00 2.03
ページ19に含まれる内容の要旨
User Controls Control Panel & Remote Control Control Panel LAMP TEMP MENU POWER/STANDBY Using the Control Panel Refer to the “Power On/Off the Projector” section on POWER pages 14-15. Automatically synchronize the projector to the input RE-SYNC source. Confirm your item selection. Enter / Help / Help Menu (only available whe n OSD menu is not shown). Press “SOURCE” to select an input signal. SOURCE Press “Menu” to launch the on-screen display Menu (OSD) menu. To exit OSD, Press “Menu” ag
ページ20に含まれる内容の要旨
User Controls Remote Control Using the Remote Control Refer to the “Power On/Off the Projector” Power section on pages 14-15. L Button Mouse left click. R Button Mouse right click. Use this button to page up. Page + Page - Use this button to page down. Confirm your item selection. Enter / Help Help Menu (only available wh en OSD menu is not shown). Press “Source” to select an input signal. Source Automatically synchronizes the projector to Re-SYNC the input source. Four Directional U
