ページ1に含まれる内容の要旨
Regulation & safety notices
Regulation & safety notices
This appendix lists the general notices of your Projector.
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with
ページ2に含まれる内容の要旨
Regulation & safety notices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interfer- ence that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Declaration of Conformity for EU countries EMC Directive 89/336/EEC (including a
ページ3に含まれる内容の要旨
Table of Contents Table of Contents ......................................................................................... Usage Notice ................................................................................................ 2 Safety Information ................................................................................................2 Precautions...........................................................................................................3 Eye Safety Warnings ...
ページ4に含まれる内容の要旨
Usage Notice Safety Information The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the a
ページ5に含まれる内容の要旨
Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow unit
ページ6に含まれる内容の要旨
Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventila- tion. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible to e
ページ7に含まれる内容の要旨
Usage Notice Eye Safety Warnings ▀■ Avoid staring directly into the projector beam at all times. ▀■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀■ A stick or laser pointer is recommended to avoid the need for the user to enter the beam. ▀■ Ensure that projectors are located out of the line of sight from the screen to the audience; this ensures that, when presenters look at the audience, they do not also have to stare at the pro- jector lamp. T
ページ8に含まれる内容の要旨
Introduction Product Features Congratulations and Thank You for choosing Optoma projec- ® tor. This product is a XGA single chip 0.7” Darkchip3 DLP projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels ® Texas Instruments Single chip DLP Technology NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) Multi-Auto functions: Auto detection, Automatic saving of user adjustments Full function IR remote control with laser point
ページ9に含まれる内容の要旨
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Composite Video Cable USB Cable 1.8m RS232 Cable 1.8m 1.8m Due to the difference in applications for each country, some regions may have different accessories. S-Video Cable 1.8m 2 x AA Batteries SCART VGA/S-Video Adaptor (Optional Accessory) Documen
ページ10に含まれる内容の要旨
Introduction Product Overview Main Unit 1 2 3 4 5 7 6 5 7 2 1 4 9 8 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Elevator Button (one on each side) 5. Elevator Foot (one on each side) 6. Zoom Lens 7. IR Receivers 8. Power Socket 9. Connection Ports English 8
ページ11に含まれる内容の要旨
Introduction Control Panel 1 1 2 2 3 3 4 4 11 11 5 5 10 10 6 6 9 9 9 9 8 8 5 5 7 7 1. IR Receiver 2. Power/Standby LED 3. Temp Indicator LED 4. Lamp Indicator LED 5. Keystone +/- 6. Re-Sync 7. Power/Standby 8. Four Directional Select Keys 9. Menu (On/Off) 10. Source Select 11. Enter English
ページ12に含まれる内容の要旨
Introduction Connection Ports 4 6 1 2 3 5 7 8 9 9 10 11 12 14 15 13 1. DVI-D Input Connector (PC Digital/HDTV/HDCP Input) 2. VGA1-In Connector (PC Analog signal/HD/Component Video Input) 3. Audio Input Connector (For DVI-D or VGA1-In) 4. S-Video Input Connector 5. Audio Input Connector (For S-Video or Composite) 6. Composite Video Input Connector 7. Networking Connector RJ45 8. Monitor Loop-through Output Connector 9. VGA2-In SCART Connector (PC Analog signal/SCART RGB/HD/Component Video Input
ページ13に含まれる内容の要旨
Introduction Remote Control with Mouse Function and Laser Pointer 15 1. Power 2. Re-Sync 3. Keystone Correction 1 16 4. Display Format 5. Mouse 2 17 6. Mouse Right Click 18 3 7. Page Up 8. Page Down 4 19 9. Four Directional Select 5 Keys 10. Enter 11. S-Video Source 12. Composite Video 20 6 Source 13. DVI Source 14. Source Lock 15. Button LED 21 7 16. Laser Button 22 8 17. AV Mute 18. Freeze 9 19. Display Mode 20. Mouse Left Click 23 21. Zoom In 24 10 22. Zoom Out 23. Clear 25 11 24. Menu 25
ページ14に含まれる内容の要旨
Installation Connecting the Projector Connect the Computer/Notebook USB VGA RS232 DVI 5 3 7 6 4 2 Due to the difference in applications for 1 each country, some regions may have different accessories. 8 Audio Output (For Active Speakers) 1...............................................................................................................Power Cord 2................................................................................................................. USB Cable 3......
ページ15に含まれる内容の要旨
Installation Connect the Video DVD Player, Set-top Box, HDTV receiver S-Video Output 4 3 3 6 2 Video Output 8 7 5 Due to the difference in 1 applications for each 9 country, some 3 11 regions may have different accessories. 10 Audio Output (For Active Speakers) DVD Player, Set-top Box, HDTV receiver 1...............................................................................................................Power Cord 2...............................................................
ページ16に含まれる内容の要旨
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red. 3. Turn on the lamp by pressing “Power/Standby” button on the control panel. And the Power LED will turn green. 4. Turn on your source (computer, notebook, video player, Text Pattern etc.). The projector will detect your source automatically within “Management” menu; check that “Source Lock” has
ページ17に含まれる内容の要旨
Installation Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp; you will see a message displayed on the projector’s screen. Press the “Power/ Standby” button again to confirm, otherwise the message will disappear after 5 seconds. 2. The cooling fans continue to operate for about 30 seconds for cooling cycle and the Power LED will flash red. When the Power LED stops flashing, the projector has entered standby mode. Once in standby mode, simply p
ページ18に含まれる内容の要旨
Installation Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator buttons . 2. Raise the image to the desired height angle , then release the button to lock the elevator feet into position. 3. Use screw in feet to fine-tune the display angle. To lower the image: 1. Press the elevator buttons. 2. Lower the image, then release the button to lock the eleva- t
ページ19に含まれる内容の要旨
Diagonal Installation Adjusting the Projector Zoom / Focus You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.3 to 40.0 feet (1.0 to 12.2 meters). Zoom Lever Focus Ring Adjusting Projection Image Size 300.2" (762.5cm) 221.5" (562.5cm) 172.2" (437.5cm) 123.0" Width 250.2" (312.5cm) (635.4cm) 184.5" 73.8" (468.8cm) (187.5cm) 143.5" 24.6" (364.6cm) 102.5" (62.5cm) (260.4cm) 61.5" (156.
ページ20に含まれる内容の要旨
User Controls Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control Panel Refer to the “Power On/Off the Projector” section Power/ on pages 14-15. Standby Press “Source” to select an input signal. Source Turns the menu On or Off. Menu Four Direc- Use to navigate through the menus. tional Select Keys Confirm your item selection. Enter Adjusts image distortion caused by tilting the / projector (±16 de
