ページ1に含まれる内容の要旨
Table of Contents
Table of Contents ...................................................................................
Usage Notice ..........................................................................................2
Safety Information .........................................................................................2
Precautions....................................................................................................3
Eye Safety Warnings ...............................
ページ2に含まれる内容の要旨
Usage Notice Safety Informations The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magni- tude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the
ページ3に含まれる内容の要旨
Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may damage your eyes. ▀■ Warning- To reduce the risk of fi re or electric shock, do not expose this projector to rain or moisture. ▀■ Warning- Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow unit to co
ページ4に含まれる内容の要旨
Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with a mild detergent to clean the display housing. Disconnect the power plug from the AC outlet if the product is not being used for a long period of time. Don’t: Do not block the ventilation slots and openings on the unit. Do not use abrasive cleaners, waxes or solvents to clean the unit. Do not use under the following conditions: - In extremely hot, cold or humid envir
ページ5に含まれる内容の要旨
Usage Notice Eye Safety Warnings ▀■ Avoid staring directly into the projector’s beam of light at all times. ▀■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀■ Using a stick or laser pointer is recommended to avoid the need for the presenter to enter the beam. ▀■ Ensure that projectors are located out of the line of sight from the screen to the audience; this ensures that, when presenters look at the audience, they do not also have to stare at th
ページ6に含まれる内容の要旨
Introduction Product Features ® This product is a single chip 0.55” DLP projector. Outstanding features include: ® Texas Instruments Single chip DLP Technology Computer Compatibility: Apple Macintosh, iMac, and VESA Standards: UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA Video Compatibility: ■ NTSC, NTSC4.43 ■ PAL/PAL-M/PAL-N/SECAM ■ SDTV compatible (480i/p, 576i/p) ■ HDTV compatible (720p, 1080i) Auto source detection with user definable settings Full function IR remote control with l
ページ7に含まれる内容の要旨
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Y-type Cable 100mm USB Cable 1.8m (Available in EMEA and ASIA version only) (Available in EMEA only) IR Remote Control Due to the difference in applications for each country, Documentation : some regions may have different User’s Manual accessori
ページ8に含まれる内容の要旨
Introduction Product Overview Main Unit 1 2 3 4 7 7 6 5 9 10 8 1. Control Panel 6. Elevator foot 2. Zoom 7. IR Receivers 3. Focus 8. Connection Ports 4. Zoom Lens 9. Power Socket 5. Elevator Button 10. Tilt-Adjustment Foot 8 English
ページ9に含まれる内容の要旨
Introduction Control Panel 9 10 6 5 8 4 7 3 2 1 1. Enter 2. Menu 3. Power 4. AV Mute 5. Source 6. Re-Sync 7. Four Directional Select Keys 8. Temp LED 9 Lamp LED 10. Power LED 9 English
ページ10に含まれる内容の要旨
Introduction Connection Ports 7 6 5 4 3 2 1 8 9 1. USB Connector (Connect to PC for Remote Mouse function) 2. RS-232 Connector 3. Audio Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital (HDCP)/PC Analog/Component Video Input) 6. VGA In/SCART Connector (PC Analog Signal/Component Video Input, HDTV/SCART Input) 7. VGA Output Connector (Monitor Loop-through Output) 8. Power Socket TM 9. Kensington Lock Port 0 English
ページ11に含まれる内容の要旨
Introduction Remote Control 1 1. Button LED 2. Power On/Off 3. Laser Button 2 4. Page Up 5. Mouse Right Click 6. Four Directional 3 Select Keys 7. Re-Sync 23 8. Page Down 4 9. Volume +/- 22 10. Zoom 5 11. AV mute 21 6 12. Video Source 7 20 13. VGA Source 14. Freeze 19 8 15. S-Video Source 18 9 16. DVI Source 17. Brightness 17 10 18. Menu 16 11 19. Keystone +/- 20. Source 15 12 21. Enter 22. Mouse Left Click 23. PC/Mouse control 24. Number Buttons 24 14 13 (for password input) English
ページ12に含まれる内容の要旨
Installation Connecting the Projector Connect to Computer/Notebook 6 3 4 5 2 Due to the difference in 1 applications for each country, some regions may have different accessories. 1...............................................................................................................Power Cord 2................................................................................................................VGA Cable 3.........................................................DVI-I t
ページ13に含まれる内容の要旨
Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver 2 7 8 3 4 1 8 5 6 Due to the difference in applications for each country, some regions may have different accessories. Video Output S-Video Output 1...............................................................................................................Power Cord 2......................................SCART RGB/S-Video Adaptor (Optional accessories) 3......................................................
ページ14に含まれる内容の要旨
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will be Amber. 3. Turn on the lamp by pressing “Power” button either on the top of the projector or on the remote. The Power LED will flash green. The startup screen will display in approximately 10 seconds. The first time you use the projector, you can select your preferred language from quick menu after the s
ページ15に含まれる内容の要旨
Installation Powering Off the Projector 1. Press the “Power” button to turn off the projector lamp, you will see a message displayed on the projector’s screen. 2. Press the “Power” button again to confirm, otherwise the message will disappear after 15 seconds. When you press “Power” button second, the system will show the timing countdown on the screen. 3. The cooling fans continue to operate for about 10 seconds for cooling cycle. When the Power LED turn Amber, the projector has ente
ページ16に含まれる内容の要旨
Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped withelevator foot for adjusting theimage height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator foot into position. 3. Use screw in foot to fine-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the ele
ページ17に含まれる内容の要旨
Diagonal Installation Adjusting the Projector’s Zoom / Focus You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters). Zoom Ring Focus Ring Adjusting Projection Image Size 302.9" (769.2cm) 227.1" (576.9cm) 176.7" (448.7cm) 126.2" Width 275.3" (320.5cm) (699.3cm) 206.5" 75.7" (524.5cm) (192.3cm) 160.6" 30.3" (407.9cm) 114.7" (76.9cm) (291.4cm) 68.8" (174.8
ページ18に含まれる内容の要旨
User Controls Control Panel & Remote Control There are twoways for you to control the functions: ControlPanel andRemote Control. Control Panel Using the Control Panel Refer to the “Power On/Off the Projector” section Power on pages 14-15. Press “Menu” to launch the on-screen display Menu (OSD) menu. To exit OSD, Press “Menu” again. Enter Confirm your item selection. AV Mute Momentarily turns off/on the audio and video. Source Press “Source” to select an input signal. Automatic
ページ19に含まれる内容の要旨
User Controls Using the Remote Control Refer to the “Power On/Off the Projector” Power Remote Control section on pages 14-15. Aim the remote at the viewing screen, press Laser and hold this button to activate the laser pointer. The PC/Mouse control can be used to con- PC/Mouse trol mouse movement. The mouse function is enabled using the USB cable to connect control your computer and the projector. L Button Mouse left click. R Button Mouse right click. Use this button to page up. Page
ページ20に含まれる内容の要旨
User Controls Using the Remote Control Press “Menu” to launch the on-screen Remote Control Menu display (OSD) menu. To exit OSD, Press “Menu” again. Zoom Press “+/-” button to zoom in of an image. DVI Press “DVI” to choose DVI source. Press “VGA” to choose source from VGA- VGA IN connector. Momentarily turns off/on the audio and AV Mute video. S-Video Press “S-Video” to choose S-Video source. Freeze Press “Freeze” to pause the screen image. Press “Video” to choose Composite video source. Thi
