ページ1に含まれる内容の要旨
2
English
Table of Contents
Usage Notice
Precautions ............................................................................................. 3
Introduction
About the Product .................................................................................... 4
Package Overview .................................................................................. 5
Installation
Product Overview .................................................................................... 6
Start Your Ins
ページ2に含まれる内容の要旨
3 English Usage Notice Warning- Do not look into the lens. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow unit to cool down, and follow all changing directions. Warning- If the cooling fan is not working, switch off the power immediately. The product will be overheated w
ページ3に含まれる内容の要旨
4 English Introduction About the Product This product is a SVGA data/video portable projection display. The outstanding features of it are listed as follows: q 9.25 lbs (4.2 kg) lightweight compact design q Single panel 6.4” TFT LCD projection system q 800 x 600 SVGA addressable pixels q Compression for 1024 x 768 XGA computer image q 16.7M (24-bit) displayable colors q XGA/ SVGA/ VGA/ VESA/ Mac/ NEC PC-98/ Fujitsu FM Towns compatible q NTSC/ NTSC 4.43/ PAL/ SECAM composite video & S-Video q Mu
ページ4に含まれる内容の要旨
5 English Package Overview This projection display comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. LCD Projection Display Remote Control Battery x 2 EVD Lamps x 2 Warranty Card User’s Manual S-Video Cable Composite Video Cable Audio Cable Carrying Case VGA Cable Power Cord
ページ5に含まれる内容の要旨
6 English Installation Product Overview w Main Unit Lens Panel Control Buttons Keystone Correction Lens Latch Lamp Door Carrying Handle Elevator Foot Lamp Latch Rear Connection Ports Monitor Loop- Power Switch Audio Outputs through Connector Power S-Video Connector Computer Input Connector Connector Composite Video Connector Audio Inputs for Audio Inputs Fuse Computer for Video
ページ6に含まれる内容の要旨
7 English w Remote Control Reset Power on/Standby POWER ON RESET FREEZE STANDBY Freeze CURTAIN ZOOM ZOOM Curtain/Color functions COL/TIN OUT IN Zoom in/Zoom out Tracking CON/BRI TRACK SOURCE Source selection Contrast/Brightness VOLUME Volume _ + MUTE Directional select keys ENTER MENU POINTER Enter/Pointer On-Screen menus Notice: For more detailed information, please refer to “Function descriptions” on page 13.
ページ7に含まれる内容の要旨
8 English Start Your Installation w Connecting the projection display Power Cord Monitor Cable Mac Monitor Adapter Mac Adapter* VGA Signal Cable Audio Cable Audio Cable Audio Cable S-Video Cable * For Macintosh, use the Mac adapter. (Refer to the Apple Macintosh Connection on page Composite Video Cable 18 for more information.) Notice: To ensure the projection display works well with your computer, please config-ure the display mode of your graphic card to make it less than or equal to 800 x 60
ページ8に含まれる内容の要旨
9 English w Setting up the projection display q Positioning the projection display Projection 5 ft. 6.5 ft. 9.5 ft. 13 ft. 20 ft. Distance (1.5 m) (2 m) (3 m) (4 m) (6 m) 160" 40" 60" 80" 110" Image Size (1.01m) (1.52m) (2.03m) (2.79m) (4.06m) (diagonal) (min.) (max.) (projection distance and image size) q Slide the lens latch and pop-up the projection lens. Switch on the power and press “Power on/Standby” button. (Either from the main unit or remote control) Power on/ Standby Buttons Lens Latc
ページ9に含まれる内容の要旨
10 English User Controls User Control Overview We have two ways for you to control the functions: panel control and remote control. w Panel control POWER ON STANDBY RESET MENU ENTER 4 Directional Keys w Remote control Reset POWER ON Power on/Standby RESET FREEZE STANDBY Freeze CURTAIN ZOOM ZOOM COL/TIN OUT IN Curtain/Color functions Zoom in/Zoom out Tracking CON/BRI TRACK SOURCE Source selection Contrast/Brightness VOLUME Volume _ MUTE + Directional select keys ENTER MENU POINTER Enter/Pointer O
ページ10に含まれる内容の要旨
11 English w OSD Menus The OSD (On-Screen Display) menus will allow you to easily adjust the display functions. Press the “MENU” button for the OSD menu options. When in computer sources, 4 the OSD will be: When in video sources, 4 Language the OSD will be: Contrast Language Tracking Contrast/Brightness Frequency Color/Tint Custom Memory Audio Audio Source Source Rear Projection Rear Projection Ceiling Projection Ceiling Projection Exit Auto Image Exit
ページ11に含まれる内容の要旨
12 English Function Descriptions w Basic Functions: Press the “Power On/Standby” button to turn on the Power On/Standby 4 projection lamp. Menu Press “Menu” button to pop up the OSD menu. 4 Reset Press “Reset” to return the display parameters of the 4 current mode to its factory default settings. Enter “Enter” is used for confirming your selection. 4 Four Directional (1)Use or button to select items. Use or to make 4 5 6 3 4 Select Keys adjustments for your selection. (2) Use or button to chang
ページ12に含まれる内容の要旨
13 English Ceiling Projection Choose this funtion from OSD menu for a ceiling 4 mounted projection. Exit 4 Choose “Exit” item to leave OSD menu. w Presentation Functions - computer source Pointer Press the “Pointer” button to show a hand shape pointer. 4 Use , , or button to move pointer around the 563 4 projected image. Freeze Press the “Freeze” button to still the screen image. 4 Curtain Press “Curtain” button to cover all the screen, then use 4 or to pull up or down the curtain. 5 6 Zoom In/Z
ページ13に含まれる内容の要旨
14 English Tracking Choose “Tracking” item to synchronize the signal timing 4 of the display to that of the graphic card. When you experience an unstable or flickering image, use this function to correct it. Frequency “Frequency” is for changing the display data frequency 4 to match the frequency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make an adjustment. Custom Memory This function enables you to save your current settings 4 for the
ページ14に含まれる内容の要旨
15 English w Presentation Functions -- video source To adjust the contrast or brightness of the image, select Contrast/Brightness 4 “Contrast/Brightness” from OSD menus. Color/Tint To adjust the color or tint of the image, select “Color/ 4 Tint” from OSD menus. Freeze Press the “Freeze” button to still the screen image. 4
ページ15に含まれる内容の要旨
16 English Appendices Troubleshooting If you are experiencing trouble with the projection display, refer to the follows. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. Press “Power on/Standby” button. Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has secure
ページ16に含まれる内容の要旨
17 English 6. Under “Manufacturers”, select “Standard monitor types” 7. Verify that the resolution setting of the monitor display is less than or equal to 800x600. If you are using a Notebook PC: 1. You are required to implement above steps of resolution setting of computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only” mode. If you are using an Apple Macintosh: Resolution of your computer is higher than that of the projection display. You may need to
ページ17に含まれる内容の要旨
18 English The Apple Macintosh Connections Connecting a Macintosh Desktop Computer For 640 x 480 Resolution: 1. Connect the supplied 15-pin VGA signal cable to the unit. 2. Connect the supplied MAC (VGA) adapter between the VGA signal cable and the signal output of your computer. For 800 x 600 Resolution: 1. Connect the supplied 15-pin VGA signal cable to the unit. 2. Connect the supplied MAC 8x6 (SVGA) adapter between the VGA signal cable and the signal output of your computer. 3. Restart
ページ18に含まれる内容の要旨
19 English Maintenance Changing the lamp Make sure the projection display has cooled for at least 30 minutes before changing the lamp. After you slide the lamp latch and open the lamp door, you will see two lamps inside; one is in “usage” position, the other is in “spare” position. Refer to the lamp changing directions below. Warning: Lamp compartment is hot! Allow it to cool before changing lamps! Lamp Changing Directions: Slide the lamp latch; open the lamp compartment. Slide the lamp asse
ページ19に含まれる内容の要旨
20 English Changing the fuse Fuse Holder the Blown Fuse Switch off the power and unplug the power cord. Pull out the fuse holder. Remove the blown fuse and then insert a new fuse. Put the fuse holder back in position.
ページ20に含まれる内容の要旨
21 English Specifications LCD panel - active matrix TFT color LCD - 6.4” panel x 1 - tr=30ms, tf=50ms response time - 150:1 contrast ratio Lamp - 400 watt halogen Display Resolution - 800 pixels(H) x 600 lines(V) Displayable Color - 16.7M colors Image Size - 40” to 180” diagonal Projection Distance - 5 ft. to 20 ft. / 1.5 m to 6 m Computer Compatibility - IBM & VESA VGA 640 x 350, 70/85Hz 640 x 400, 70/85Hz 720 x 400, 70/85Hz 640 x 480, 60/72/75/85Hz VESA SV GA 800 x 600, 56/60/72/75Hz VESA XGA
