ページ1に含まれる内容の要旨
LCD
Projector
User Manual
X70B
MODEL LVP-X70BU
EN – 1
ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
ページ3に含まれる内容の要旨
Contents Important safeguards ...........................................................................4 Overview ............................................................................................... 6 Using the remote control ......................................................................8 Battery installation ......................................................................................................... 8 Installation ...............................................
ページ4に含まれる内容の要旨
Important safeguards 10. Power sources Please read all these instructions regarding your LCD This projector should be operated only from the projector and retain them for future reference. Follow type of power source indicated on the marking all warnings and instructions marked on the LCD pro- label. If you are not sure of the type of power, jector. please consult your appliance dealer or local power company. 1. Read instructions All the safety and operating instructions should 11. Power-cord pr
ページ5に含まれる内容の要旨
WARNING: Do not touch Air outlet grill and Unplug immediately if there is Bottom plate which becomes hot. Do not touch them or put other equipment in front of something wrong with your projector. Do not operate if smoke, strange noise or odor comes Air outlet grill. The heated Air outlet grill and Bottom out of your projector. It might cause fire or electric plate may cause injury or damage to other equipment. shock. In this case, unplug immediately and contact Also, do not set the projector on
ページ6に含まれる内容の要旨
Overview 10 9 7 6 5 8 1 Air inlet grill (Front) 2 Front height adjuster button 3 Air inlet grill (Side) 4 Terminal board 5 Speaker 6 Remote control sensor (Front) 7 Zoom ring 8 Focus ring 9 Control panel 10 Lens 11 Kensington Security Lock Standard connector 14 2 3 12 Remote control sensor (Rear) 13 Air outlet grill 12 13 11 Control panel 1 LAMP indicator 2 TEMP (temperature) indicator 3 + , – (VOLUME) button 12 11 10 9 8 4 VIDEO button 5 MENU button AUTO POSITION 6 ENTER button POWER MUTE 7 Dir
ページ7に含まれる内容の要旨
Bottom side 3 1 Adjustment foot (right and left) 2 Lamp cover 3 Adjustment foot (up and down) Caution: Do not replace the lamp right after using the projector. The lamp is very hot. 2 1 1 Transmitter indicator Remote control 2 Power button 3 SOURCE button 1 4 Mouse button 5 Right click button (For mouse) 2 16 POWER MUTE 6 MENU button SOURCE KEYSTONE 7 AUTO POSITION button 3 15 MOUSE LASER 8 PinP button 14 9 + , – (VOLUME) buttons 10 EXPAND button 4 11 STILL button 12 ENTER button 13 13 Mouse poi
ページ8に含まれる内容の要旨
Using the remote control Battery installation Use two AAA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring side, and make sure to set them tightly. 3. Replace the back cover. 12 3 Important: • Do not combine a new battery with an old one. • Load batteries in the correct position. • Do not
ページ9に含まれる内容の要旨
H Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be- tween the projector and screen: Width Multiply the width of the screen Screen × 1.9 (min.) , Multiply the width of the A B screen × 2.4 (max.). • Refer to the chart for recommended Screen distances in maximum zoom and minimum zoom. A=B (between the screen and L the head of the projector) Distance from scre
ページ10に含まれる内容の要旨
Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the AC power cord. • If connected units are set too close to one another, the image may be affected. • Refer to the user manual of each component for details of connections. Projector + AV equipment Important: • Match the color of video and audio p
ページ11に含まれる内容の要旨
Projector + Personal computer RGB cable for PC to COMPUTER IN computer MAIN S-VIDEO COMPUTER OUT COMPUTER IN RS-232C VIDEO IN VIDEO AUDIO L (MONO) AUDIO R AC IN to monitor port to COMPUTER OUT to AUDIO IN AUDIO OUT to PC audio MONITOR OUTPUT output PC audio cable (option) RGB cable for PC (option) When outputting to both a PC monitor and the projector. Important: • Connectors or analog RGB output adapters may be necessary depending on the PC connected to this projector. Please contact your
ページ12に含まれる内容の要旨
Preparing the projector for operation Getting ready for projection Adjusting the angle of projection 1. Connect the power cord provided to the projector. For the best result, project onto a flat screen with a 90 2. Connect the power cord to the wall power outlet. degree angle to the floor. If necessary, tilt the projector 3. Remove the lens cap. by adjusting two foot adjustments on the bottom of the projector. Warning: • Do not look directly into the lens when projector is “ON”. • The lens cap i
ページ13に含まれる内容の要旨
To operate projector power ON 2 • • 9 MUTE button MAIN S-VIDEO COMPUTER OUT COMPUTER IN POWER MUTE USB RS-232C VIDEO IN VIDEO SOURCE KEYSTONE 3 • • 7 • • 8 MOUSE LASER AUDIO L (MONO) AUDIO R 4 AC IN AUTO POSITION button 3 • • 7 • • 84 R-CLICK MUTE button MENU ENTER AUTO POSITION POWER MUTE AUTO POSITION STILL AUTO POSITION STILL button COMPUTER P in P EXPAND button LAMP SOURCE –+ VOLUME VIDEO VOLUME MENU TEMP ENTER 1. Turn on the equipment connected to the projector. • When the lamp indicato
ページ14に含まれる内容の要旨
To operate projector power ON (Continue) Turning off the projector The volume from the speaker Press the volume + or – button to change the volume 7. Press the POWER button. from the speaker. The message “POWER OFF? YES : PRESS AGAIN” The volume control bar will appear on the screen. appears on the screen. • To exit from this mode, press any button except POWER, LASER, mouse pointer, R/L-click, 30 STILL and VOLUME + and - buttons. 8. Press the POWER button again. • The volume control bar will d
ページ15に含まれる内容の要旨
Menu operation RED ± 30 IMAGE CONTRAST ± 30 YELLOW ± 30 BRIGHTNESS ± 30 GREEN ± 30 COLOR MATRIX 1 CYAN ± 30 2 BLUE ± 30 USER USER MAGENTA ± 30 OFF SATURATION ± 5 COLOR TEMP. STANDARD CONTRAST R ± 30 HIGH CONTRAST B ± 30 LOW BRIGHTNESS R ± 30 USER BRIGHTNESS B ± 30 SHARPNESS ± 10 TINT ± 10 (Displays only when the source is selected to VIDEO) COLOR ± 10 (Displays only when the source is selected to VIDEO) INSTALLATION KEYSTONE -15˚, -12˚, -9˚, -6˚, -3˚, 0˚, +3˚, +6˚, +9˚, +12˚, +15˚ AUTO POWER ON
ページ16に含まれる内容の要旨
Menu operation (continued) 1 IMAGE CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher Opt XGA60 as the number increases. IMAGE BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as CONTRAST 0 the number increases. BRIGHTNESS 0 COLOR MATRIX. ......Adjusts color balance in each color of the image. See page COLOR MATRIX USER 18. COLOR TEMP. STANDARD COLOR TEMP... . Adjusts color temperature. See page 18. SHARPNESS 0 SHARPNESS ...... Adjusts the picture sha
ページ17に含まれる内容の要旨
4 SIGNAL MEMORY CALL ........Use to select AUTO, USER 1 or USER 2. See below. Opt XGA60 HORIZ. POSITION ....Use to adjust the horizontal position of the image. SIGNAL VERT. POSITION .....Use to adjust the vertical position of the image. A MEMORY CALL AUTO U FINE SYNC. ....... Use to synchronize the projector with PC input signals so HORIZ. POSITION 0 that the image is not blurred. VERT. POSITION 0 TRACKING ......... Use to avoid image noise such as wide stripes. FINE SYNC. 0 COMPUTER INPUT ....T
ページ18に含まれる内容の要旨
Picture adjustment Adjusting the image 3. Press the $ or % button to select USER }. You can adjust the picture by using the IMAGE menu. 4. Press the { or } button to select the desired color. Opt • If you wish to adjust the color intensity of the XGA60 image, select SATURATION. IMAGE 5. Press the $ or % button to adjust the color balance CONTRAST 0 of the color. BRIGHTNESS 0 COLOR MATRIX USER 6. Repeat steps 4 and 5 for more adjustments. COLOR TEMP. STANDARD 7. Exit the menu system by pressin
ページ19に含まれる内容の要旨
Top part of image curves : Adjustment from personal computer Change the setting of HOLD in SIGNAL menu or Although this projector sets proper signal systems PLL in SIGNAL - USER menu. automatically for the image signal from personal HOLD ...Select ON, and adjust BEGIN or computers, it cannot be applied to some of personal END for image which top part is the computers. In this case, press the AUTO POSITION least curved. button. If the images are still not projected
ページ20に含まれる内容の要旨
Picture adjustment (continued) Specification of RGB signals in each computer mode of the projector Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 1024 x 768 – TV50 – 15.63 50.00 1024 x 768 – 1080i – 33.75 60.00 1024 x 576 – 720p – 45.00 60.00 1024 x 576 – PC98 640 x 400 24.82 56.42 1024 x 640 640 x 400 CGA70 640 x 400 31.47 70.09 1024 x 640 640 x 400 CGA85 640 x 400 37.86 85.08 1024 x 640 640 x 400 VGA60
