ページ1に含まれる内容の要旨
010-0752-02
ページ2に含まれる内容の要旨
Declaration of Conformity FCC Warning Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon This device complies with part 15 of the FCC Rules. Operation is subject to the following two 97223-8368 USA conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. We declare under our sole responsibility that this projector conforms to the follow
ページ3に含まれる内容の要旨
Setup menu 33 Table of Contents Status and Service menu 36 Introduction 4 Using LitePort 37 Positioning the projector 6 LiteShow 39 Connecting a computer source 7 LiteShow Menu Options 40 USB connection 7 Maintenance 46 VGA connection 7 Cleaning the lens 46 Optional computer connections 7 Using the security lock 46 Displaying an image 8 Replacing the projection lamp 47 Adjusting the image 9 Connecting a video device 11 Video device connections 11 Composite video connection 11 VGA connection 11
ページ4に含まれる内容の要旨
2’ / 0.6 m 8’/2.4m • Refer all service to qualified service personnel. Servicing your own projector Important Operating Considerations for Safety can be dangerous to you and will void the warranty. • Refer to this guide for proper startup and shutdown procedures. • Only use replacement parts specified by InFocus. Unauthorized substitutions • Follow all warnings and cautions in this manual and on the projector. may result in fire, electrical shock, or injury, and may void the warranty • Place
ページ5に含まれる内容の要旨
Introduction Your new digital projector is simple to connect, easy to use, and straightforward to maintain. It is a versatile projector that is flexible enough for business presentations and home video viewing too. The IN3916 has native XGA 1024x768 resolution. It touch keypad is compatible with a wide variety of computers and video devices. focus (front ring) Product specifications To read the latest specifications on your multimedia projector, be sure to visit our website at www.infocus.com
ページ6に含まれる内容の要旨
Connector panel The projector provides both computer and video connection options, including: • VGA computer RJ45 port audio L/R • Composite video HDMI USB A audio in/out • HDMI computer USB mini • USB mini B connector. Used for USB Display, slide advance (and mouse control when used with an optional remote control only) and LiteBoard™ Wand control. USB A • USB A connector. Used for LitePort (JPEG images displayed from USB flash USB mini B drive) and WLAN. • Monitor out, for VGA pass through
ページ7に含まれる内容の要旨
Positioning the projector Table 1: Screen Size To determine where to position the projector, consider the size and shape of your Projection screen, the location of your power outlets, and the distance between the projector Diagonal Screen Size of the Projected Image Distance (L) and the rest of your equipment. Here are some general guidelines: Size Width Minimum • Position the projector between 30 inches (.75m) and 65 inches (1.65m) from Feet Inches Meters Inches Milimet Meters Inches the scr
ページ8に含まれる内容の要旨
To take advantage of HDMI 1.3 Deep Color (30 bit), you must have a 1.3- Connecting a computer source compatible source. USB Mini B connection Connecting power Connect the USB cable to your computer's USB A connector and to the projector's Connect the black power cord to the Power connector on the rear of the projector USB mini B connector. and to your electrical outlet. The Power light on the Status Indicator Panel (page 16) turns amber. NOTE: Always use the power cord that shipped with the p
ページ9に含まれる内容の要旨
Displaying an image press Power button Touch the Power button. The Power button blinks green and the fans start to run. When the lamp comes on, the start up screen displays and the Power button is steady green. It can take up to a minute for the image to achieve full brightness. ? No start up screen? Get help on page 17. Turn on your computer or video device. turn on computer or video device The image should appear on the projection screen. If it doesn’t, press the Source button on the proje
ページ10に含まれる内容の要旨
Adjusting the image adjust height If necessary, adjust the height of the projector by pressing the elevator foot release button to extend the foot. release button If necessary, rotate the leveling foot located at the rear of the projector. elevator foot Avoid placing your hands near the hot exhaust vent at the front of the projector. adjust distance Position the projector the desired distance from the screen at a 90 degree angle to the screen. See page 6 for a table listing screen sizes and d
ページ11に含まれる内容の要旨
What is Aspect Ratio? 4:3 screen 16:10 screen Aspect ratio is the ratio of the image width to image height. Depending on your source, you will want to choose the aspect ratio (using your projector remote or keypad) which matches your source. Older TV screens and laptops are 4:3; newer TV screens, HDTV and most DVDs 4:3 are 16:9; and widescreen computers are 16:10. mode Use an aspect ratio of 16:9 for widescreen movies and HDTV, and use Native for 4:3 content. Force Wide can also be enabled
ページ12に含まれる内容の要旨
Composite video connection Connecting a video device Plug the composite video cable’s yellow connector into the video-out connector on You can connect video devices such as VCRs, DVD players, camcorders, digital the video device. Plug the other yellow connector into the yellow Video connector cameras, video game consoles, HDTV receivers, and TV tuners to the projector. on the projector. You can connect the audio directly to the projector to get sound from the built-in If your source uses RC
ページ13に含まれる内容の要旨
the source to VGA 1 or VGA 2 (press the source button on the projector or its LiteBoard™ Wand remote if needed - you may need to press it several times). The LiteBoard Wand works like a wireless mouse - but one that works in midair, not 6 Turn on the wand by pressing its tip, left or right button - the wand's blue status on your desktop. Just hold the wand in your hand, and point it at the projected light will start to blink. image to point, click and drag. The wand works with all your softw
ページ14に含まれる内容の要旨
How to Hold the Wand Wand Features You can hold the wand the way you would hold a normal pencil or pen, or you can Tip Sensor Left mouse button hold it like a remote control - use in whichever position is most comfortable. Scroll Wheel button NOTE: If the wand is up close to the screen, you can press its tip against the projection surface to click and drag. Not recommended for use with fabric screens. Link light Using More than One Wand The projector can work with more than one wand, but you
ページ15に含まれる内容の要旨
Link Light Lithium Battery Information The blue link light shows the status of the wand's wireless connection to the Manufacturer: HiTech Energy Inc. projector. The link light will blink frequently (more than once per second) when the Model: E3BE105K1002 wand is attempting to link to the projector; then it will blink less frequently (about Rating: 3.7V/800mAh once every 4 seconds) after the wand has linked to the projector. Caution: Lithium battery is only rechargeable, and not user replaceable.
ページ16に含まれる内容の要旨
• If the mouse pointer is in the wrong place on the screen, or the mouse pointer's Troubleshooting LiteBoard movement is restricted to only part of the screen, try one of these solutions: For the most up-to-date information, visit our support site at www.infocus.com/ - Make sure your projector is displaying the computer's screen and not some support other source (such as DVD, VCR, etc.). To change the source, press the Source • If the wand doesn't work at all, or it works intermittently, try
ページ17に含まれる内容の要旨
The Status Indicator Panel on top of the projector indicates the state of the projector Shutting down the projector and can help you troubleshoot. Screen Save Time You can make the black screen appear after a preset number of minutes by turning on the Screen Save Time feature in the Setup menu. See page 33. Table 2: Status indicator light behavior and meaning Auto Off Time Icon Meaning The projector also has an Auto Off Time feature that automatically turns the projector off after no active s
ページ18に含まれる内容の要旨
A A Problem Solution Result No start up screen Plug power cord into the projector Correct image press power button USB A USB mini B Only start up screen appears Computer image projected Press the Source button activate laptop’s external port Restart laptop 17 Startup Screen Startup Screen A
ページ19に含まれる内容の要旨
A A A A Problem Solution Result Press the Auto Image button on keypad Computer image projected No computer image, just the words “Signal out of Adjust computer refresh rate in Control Panel > range” Display > Settings > Advanced > Adapter (location varies by operating system) You may also need to set a different resolution on your computer, as shown in the following problem, “image fuzzy or cropped” Disable “Extend my Windows Desktop” in Control Only my laptop’s background appears, not t
ページ20に含まれる内容の要旨
Problem Solution Result Set your computer’s display resolution to the native Image fuzzy or cropped Image clear and not cropped resolution of the projector (Start > Settings > Control Panel > Display > Settings tab) A A A For a laptop, disable laptop monitor or turn- on dual-display mode Move projector, adjust height Correct image Image not centered on screen Advanced Picture Red Gain 50 Adjust horizontal Green Gain 50 Blue Gain 50 or vertical position Red Offset 50 Green Offset 50 in A
