ページ1に含まれる内容の要旨
Projector
CP-X1230
CP-X1230
User's Manual - Operating Guide
User's Manual - Operating Guide
TECHNICAL
Dimensions Dimensions
[unit: mm]
1
ページ2に含まれる内容の要旨
Example Of Computer Signal Example Of Computer Signal Resolution fH (kHz) fV (Hz) Rating Signal mode Display mode H × × V 720 × 400 37.9 85.0 VESA TEXT Zoom in 640 × 480 31.5 59.9 VESA VGA (60Hz) Zoom in 630 × 480 35.0 66.7 Mac13"mode Zoom in 640 × 480 37.9 72.8 VESA VGA (72Hz) Zoom in 640 × 480 37.5 75.0 VESA VGA (75Hz) Zoom in 640 × 480 43.3 85.0 VESA VGA (85Hz) Zoom in 800 × 600 35.2 56.3 VESA SVGA (56Hz) Zoom in 800 × 600 37.9 60.3 VESA SVGA (60Hz) Zoom in 800 × 600 48.1 72.2 VESA SVGA (72H
ページ3に含まれる内容の要旨
Initial Set Signals Initial Set Signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the PICTURE-2 menu. Back porch b Front porch d Back porch b Front porch d Display interval c Display interval c DATA DATA H. Sync. V. Sync. Sync. a Sync. a Computer / Horizontal signal timing (µs) Computer / Vertical signal timimg (lines) Signal Signal a b c d a b c d TEXT 2.0 3.0 2
ページ4に含まれる内容の要旨
Connection To The Ports Connection To The Ports B G CONTROL REMOTE CONTROL AUDIO IN 1 D AUDIO IN2 AUDIO OUT RGB RGB OUT CR/PR CB/PB Y A R/CR/PR G/Y B/CB/PB HV E R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC H C A RGB • Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω 54321 terminator (positive) 0 9 8 7 6 • H./V. sync. Signal: TTL level (positive/negative) ewq=- • Composite sync. Signal: TTL level D-Sub 15 pin shrink jack Pin Signal Pin Signal Pin Signal Video input Red Ground Red - 1 6 - Video inpu
ページ5に含まれる内容の要旨
Connection To The Ports (continued) Connection To The Ports (continued) L CONTROL REMOTE CONTROL AUDIO IN 1 K AUDIO OUT AUDIO IN2 Y RGB RGB OUT CR/PR CB/PB G/Y B/CB/PB HV R/CR/PR R - AUDIO IN - L VIDEO IN S-VIDEO IN J BNC I I VIDEO IN • RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60 • 1.0 ± 0.1 Vp-p at 75 Ω terminator Pin Signal J S-VIDEO Color signal: 0.286 Vp-p (NTSC, burst), 75 Ω terminator 1 Color signal: 0.300 Vp-p (PAL/SECAM, burst), 75 Ω terminator Brightness signal: 1
ページ6に含まれる内容の要旨
Connection To The Ports (continued) Connection To The Ports (continued) F CONTROL REMOTE CONTROL AUDIO IN 1 AUDIO OUT AUDIO IN2 RGB RGB OUT CR/PR CB/PB Y R/CR/PR G/Y B/CB/PB HV R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC F CONTROL Computer side CONTROL port RS-232C port - 1 1 CD RD 2 2 RD TD 3 3 TD 12345 54321 54321 12345 - 4 4 DTR 6789 9876 9876 6789 GND 5 5 GND - 6 6 DSR D-Sub 9 pin D-Sub 9 pin RTS 7 7 RTS D-Sub 9 pin D-Sub 9 pin CTS 8 8 DTS plug jack jack plug - 9 9 RI memo About the
ページ7に含まれる内容の要旨
RS-232C Communication RS-232C Communication Connecting The Cable Turn off the projector and the computer power supplies. 1 Connect the CONTROL port of the projector with a RS-232C port of the computer by 2 a RS-232C cable. Use the cable that fulfills the specification shown in the previous page. Turn on the computer power supply and after the computer has started up, turn on 3 the projector power supply. Communications Setting 19200bps, 8N1 1. Protocol Consist of header (7 bytes) + command data
ページ8に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+‘00H’+‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) (1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the project
ページ9に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart Command data Names Operation type Header CRC Action Type Setting code Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00 Keystone V Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00 Decrement BE EF 03 06 00 0E D2 05 00 07 20 00 00 Keystone V Reset Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00 Get BE EF 03 06 00 E9 D0 02 00 0B 20 00 00 Keystone H Increment BE EF 03 06 00 8F D0 04 00 0B 20 00 00 Decrement BE EF 03 06 0
ページ10に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 03 06 00 97 D2 01 00 05 30 02 00 ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00 ITALIANO BE EF 03 06 00 37 D1 01 00 05 30 04 00 NORSK BE EF 03 06 00 A7 D0 01 00 05 30 05 00 NEDERLANDS BE EF 03 06 00 57 D0 01 00 05 30 06 00
ページ11に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code 50 BE EF 03 06 00 EF F6 01 00 B3 30 05 00 60 BE EF 03 06 00 7F F7 01 00 B3 30 04 00 70 BE EF 03 06 00 4F F5 01 00 B3 30 03 00 Set 80 BE EF 03 06 00 DF F4 01 00 B3 30 02 00 Custom User B 90 BE EF 03 06 00 2F F4 01 00 B3 30 01 00 100 BE EF 03 06 00 BF F5 01 00 B3 30 00 00 Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00 Get BE EF 03 06 0
ページ12に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code Get BE EF 03 06 00 0D 83 02 00 00 21 00 00 V Position Increment BE EF 03 06 00 6B 83 04 00 00 21 00 00 Decrement BE EF 03 06 00 BA 82 05 00 00 21 00 00 V Position Reset Execute BE EF 03 06 00 E0 D2 06 00 02 70 00 00 Get BE EF 03 06 00 F1 82 02 00 01 21 00 00 H Position Increment BE EF 03 06 00 97 82 04 00 01 21 00 00 Decrement BE
ページ13に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code LOW BE EF 03 06 00 26 72 01 00 06 22 01 00 Set MIDDLE BE EF 03 06 00 D6 72 01 00 06 22 02 00 Video NR HIGH BE EF 03 06 00 46 73 01 00 06 22 03 00 Get BE EF 03 06 00 85 73 02 00 06 22 00 00 TURN OFF BE EF 03 06 00 1A 71 01 00 0B 22 00 00 Set S2-Aspect TURN ON BE EF 03 06 00 8A 70 01 00 0B 22 01 00 Get BE EF 03 06 00 29 71 02 00 0B
ページ14に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code Get BE EF 03 06 00 31 D3 02 00 01 20 00 00 Volume Increment BE EF 03 06 00 57 D3 04 00 01 20 00 00 Decrement BE EF 03 06 00 86 D2 05 00 01 20 00 00 TURN OFF BE EF 03 06 00 46 D3 01 00 02 20 00 00 Set Mute TURN ON BE EF 03 06 00 D6 D2 01 00 02 20 01 00 Get BE EF 03 06 00 75 D3 02 00 02 20 00 00 Lamp Time Get BE EF 03 06 00 C2 FF 0
ページ15に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code Off BE EF 03 06 00 FE 22 01 00 00 23 00 00 Set Large BE EF 03 06 00 6E 23 01 00 00 23 01 00 PinP Size Small BE EF 03 06 00 9E 23 01 00 00 23 02 00 Get BE EF 03 06 00 CD 22 02 00 00 23 00 00 Upper Left BE EF 03 06 00 02 23 01 00 01 23 00 00 Upper Right BE EF 03 06 00 92 22 01 00 01 23 01 00 Set
ページ16に含まれる内容の要旨
RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Command data Names Operation type Header CRC Action Type Setting code Last Ch BE EF 03 06 00 9E D9 01 00 18 20 10 00 RGB BE EF 03 06 00 5E D4 01 00 18 20 00 00 BNC BE EF 03 06 00 9E D6 01 00 18 20 04 00 Set Power Up Source Component BE EF 03 06 00 0E D7 01 00 18 20 05 00 S-Video BE EF 03 06 00 3E D5 01 00 18 20 02 00 Video BE EF 03 06 00 CE D5 01 00 18 20 01 00 G
