ページ1に含まれる内容の要旨
ON /ON STANDBY
LAMP
TEMP
INPUT
MUTE
ZOOM
FOCUS
MENU
RESET
Liquid Crystal Projector
Model name
CP-X955W/E
OPERATING GUIDE
Thank you very much for purchasing this Hitachi Liquid Crystal Projector.
Please read this operating guide to use correctly. After reading this manual, keep it carefully for future
reference.
Outline
This Liquid Crystal Projector can display various
Contents Page
computer signals and NTSC/PAL/SECAM video signals.
Before use ............................. 3
Names and functions
ページ2に含まれる内容の要旨
FOR THE CUSTOMERS IN U.K THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Shoud the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If
ページ3に含まれる内容の要旨
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications, Oper
ページ4に含まれる内容の要旨
[Safety precaution] Warning LIf any abnormality occurs. L Do not look directly at the lens when the lamp is lit. When there is an abnormal smell or smoke, if • you use this unit as it is, this could cause a fire Do not look directly at the lens when or electric shock, etc. When an abnormality is the lamp is lit. Since a strong light is found, immediately turn off the power switch used, it could damage you vision, etc. and pull out the power plug from the power Especially pay attention if child
ページ5に含まれる内容の要旨
Warning L Be careful in handling the power cord. Do not scratch, damage or process the power • cord. Do not bend it forcibly. Also do not put a heavy object on it, do not heat it and do not pull it. If you do, the power cord may be damaged and it may cause a fire, electric shock, etc. • Do not pull the cord. • Do not put a heavy object on it. • Do not damage the cord. • Do not put it near a heating device. Be careful that this unit is not placed on the • power cord. The power cord may be dam
ページ6に含まれる内容の要旨
Caution L Do not step on this unit or do not put a L Do not place this unit in a moist or heavy object on it. dusty place. Do not step on this unit. Especially Do not place this unit in a moist or dusty place. • • pay attention if children are present. It may cause a fire, electric shock, etc. If you do, the unit may fall over or Do not place this unit where it • may be broken causing an injury. would be exposed to soot or steam, Do not put a heavy object on this unit. If you near a cooking st
ページ7に含まれる内容の要旨
Caution [General cautions] LDo not place this unit where it gets hot. L Cleaning the cabinet. Be careful since if you place the unit Since many plastic materials are used on the • outdoors, in a place exposed to direct surface of the cabinet, if the surface is cleaned sunlight or near a heating device, the using benzene, thinner, etc., it may change in cabinet and parts could be affected. quality or the coating may be peeled off. Avoid using chemicals. When a chemically-teated cloth is used, fo
ページ8に含まれる内容の要旨
ON STANDBY LAMP /ON TEMP INPUT MUTE ZOOM FOCUS MENU RESET STANDBY ON /ON LAMP TEMP INPUT MUTE ZOOM FOCUS MENU RESET Names and functions of each part LAMP indicator ON indicator Main unit This lights when the This blinks in the standby mode lamp does not light. and lights in the operation (See page 29) mode. (See page 29) STANDBY / ON button Speaker Power ON/OFF button. OFF sets the unit in Remote control standby mode. sensor Handle (See page 12 ~ 13) TEMP Indicator This lights when temperature
ページ9に含まれる内容の要旨
Names and functions of each part (continued) Remote control transmitter STANDBY / ON button MUTE button Power ON/OFF button. Silences the sound. (Cancels the mute OFF sets the unit in standby mode. when the unit is set in mute mode.) STANDBY/ON MUTE (See page 12, 13) VOLUME button FOCUS button Adjusts volume. The sound is loud or Adjusts focus. (See page 12) low while pressing the “+” or “–” button. FOCUS ZOOM VOLUME LASER ON ZOOM button Laser pointer ON/OFF button. Adjusts picture size.(See pag
ページ10に含まれる内容の要旨
Names and functions of each part (continued) How to insert batteries insert the provided batteries (LR6 (alkali)) into the remote control transmitter. Á Remove the battery ª Insert the batteries as compartment cover. illustrated inside the battery compartment. Slide the battery compartment cover in the direction of the arrow while pressing slightly £ Replace the cover. down on it. Caution Caution Cautions on use of batteries Cautions on use Do not use batteries not specified for this unit. Do no
ページ11に含まれる内容の要旨
Installation Example of the projector and screen installation Determine picture size and projection distance as illustrated below. View from the top View from the side Screen Lens center b a a: Distance from the projector to the screen. (±10%) a (inch) Screen (inch) b (inch) b: Length from the center of the lens to the bottom of the Minimum Maximum picture. (±10%) 40 60 89 3.4 This screen size is full-screen size. (1024 dots × 768 dots) 60 89 134 5.1 Installation of liquid crystal projector 80 1
ページ12に含まれる内容の要旨
ON STANDBY LAMP /ON TEMP INPUT MUTE ZOOM FOCUS MENU RESET Basic operations To project the picture STANDBY/ON MUTE 5742 2 FOCUS ZOOM VOLUME 4 POSITION ON LASER 5 RESET RIGHT MENU ON MOUSE ON BLANK TIMER 7 1 RGB 1/2 VIDEO 1/2 INPUT 3 1 Turn the MAIN POWER switch of the projector on. [ : ON] I • The ON indicator will light up orange. 2 Press the STANDBY/ON button. • The ON indicator blinks (green) and then lights (green). • The ON indicator will blink green during warm-up and light up. 3 Turn the
ページ13に含まれる内容の要旨
STANDBY ON /ON LAMP TEMP INPUT MUTE ZOOM FOCUS MENU RESET Basic operations (continued) To turn off the power 1 STANDBY/ON MUTE 1 FOCUS ZOOM VOLUME POSITION ON LASER RESET RIGHT MENU ON MOUSE ON 2 BLANK TIMER RGB 1/2 VIDEO 1/2 INPUT 3 1 Press the STANDBY/ON button, for 1 second. • The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops and the indicator blinks orange. • Press the STANDBY/ON button for short time (less than 1 second), the projector do not s
ページ14に含まれる内容の要旨
Adjustments and functions STANDBY/ON MUTE 1, 2 FOCUS ZOOM VOLUME POSITION ON LASER 2 1 1 RESET RIGHT MENU ON MOUSE ON BLANK TIMER RGB 1/2 VIDEO 1/2 1 Press the MENU ( ) buttons or the MENU ON / OFF button. • On-screen menus are displayed on the screen. 2 Select the menu to be adjusted using the MENU ( ) buttons or DISK PAD. • Menu displayed in green is selected. 3 Select the item to be adjusted using the MENU ( ) buttons or DISK PAD. • Item displayed in green can be adjusted. When the MOUSE ON b
ページ15に含まれる内容の要旨
Adjustments and functions (continued) SET UP The menu SET UP serves for the change of parameters influencing the picture and for the move picture position. RGB signal input VIDEO signal input SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. VOLUME VOLUME BRIGHT BRIGHT CONTRAST CONTRAST V POSIT 121 SHARPNESS H POSIT 57 COLOR H PHASE 7 TINT H SIZE 800 RB COLOR BAL COLOR BAL R B Adjustment Item Details of adjustment VOLUME Decrease Increase BRIGHT Dark Bright (BRIGHTNESS) CONTRAST Lower Highe
ページ16に含まれる内容の要旨
Adjustments and functions (continued) INPUT The menu INPUT serves for the selection of input source. SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. SYSTEM RGB1 RGB1 AUTO NTSC RGB2 RGB2 PAL VIDEO1 VIDEO1 VIDEO2 VIDEO2 SECAM TEST TEST NTSC4.43 PATTERN PATTERN M-PAL Adjustment Item Details of adjustment RGB1 Selects the RGB 1 terminal. RGB2 Selects the RGB 2 terminal. VIDEO1 Selects the VIDEO 1 terminal. VIDEO2 Selects the VIDEO 2 terminal. TEST PATTERN Selects the TEST PATTERN. (Start up screen
ページ17に含まれる内容の要旨
Adjustments and functions (continued) SETUP INPUT IMAGE OPT. MESSAGE TURN ON TURN OFF Adjustment Item Details of adjustment Inverts the picture horizontally or vertically. NORMAL Not invert. H : INVERT Inverts the picture horizontally. MIRROR V : INTERT Inverts the picture vertically. H&V : INVERT Inverts the picture horizontally and vertically. BLANK Selects the blank color of signal or pressing BLANK ON button. REVEAL Selects the speed of revelation. See page 9 “BLANK ON button”. MESSAGE Tur
ページ18に含まれる内容の要旨
Adjustments and functions (continued) SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. 1200 COM. SPEED COM. BITS 7N1 2400 (bps) 8N1 4800 9600 19200 SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. ENGLISH LANGUAGE TIMER 10 min. FRANÇAIS DEUTSCH ESPAÑOL ITALIANO NORSK NEDERLANDS SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. START UP TURN ON AUTO OFF 0 min. TURN OFF STOP Adjustment Item Details of adjustment COM. SPEED Selects the data speed of transmission. (five kinds) (COMMUNICAT
ページ19に含まれる内容の要旨
Connection to the video signal terminals 1. Input signal Luminance signal 1.0Vp-p, 75 Ω termination S-VIDEO signal Chrominance signal 0.286Vp-p (burst signal), 75 Ω termination VIDEO signal 1.0Vp-p, 75 Ω termination Input 200mVrms, 20 kΩ below (MAX 3.0Vp-p) AUDIO signal Output 0~200mVrms, 1k Ω 2. Signal input terminal Chrominance signal Luminance signal Ground Ground S VIDEO input (Mini DIN4 pin) Caution Video input signal terminals have priority in the following order. 1 S-VIDEO input terminal
ページ20に含まれる内容の要旨
Connection to the RGB signal terminal (continued) 3. Example of computer signal fH fV Standard Display Dots Resolution Note 1 Note 2 Note 3 H × V (kHz) (Hz) Type H × V 31.5 70.1 VGA-1 Expanded 1024 × 560 640 × 350 NEC 640 × 400 24.8 56.4 Expanded 1024 × 640 PC9800 640 × 400 31.5 70.1 VGA-2 Expanded 1024 × 640 43.3 85.0 VESA Expanded 640 × 480 853 × 640 640 × 480 31.5 59.9 VESA VGA-3 Expanded 1024 × 768 SW 1 ON Mac 13˝ 640 × 480 35.0 66.7 SW 5 ON Expanded 1024 × 768 mode SW 6 ON 37.9 72.8 VESA
