ページ1に含まれる内容の要旨
Roadster Orbital Head
System
User Manual
© High End Systems, Inc. 2006, All Rights Reserved
Information and specifications in this document are subject to change without notice.
High End Systems, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual.
Trademarks used in this text: High End Systems, WholeHog III, Dataflash, Intellebeam,
and LithoPatterns are registered trademarks; and Catalyst, the Catalyst Logo, the High
End Systems globe
ページ2に含まれる内容の要旨
® Contacting High End Systems US and the Americas Sales Department: High End Systems, Inc. 2105 Gracy Farms Lane Austin, TX 78758 USA voice: 512.836.2242 fax: 512.837.5290 Customer Service: High End Systems, Inc. 2105 Gracy Farms Lane Austin, TX 78758 USA voice: 800.890.8989 24-hour fax: 512.834.9195 24-hour voice mail: 512.837.3063 or 800.890.8989 World Wide Web: http://www.highend.com ii Roadster Orbital Head System User Manual
ページ3に含まれる内容の要旨
Declaration of Conformity according to ISO/IEC Guide 22 and EN45104 Manufacturer's name: High End Systems Distributor's name: High End Systems Distributor's address: 2105 Gracy Farms Lane Austin, TX 78758 USA Declares that the product: Product Name: Roadster Orbital Head System Product Number: All Product Options: All Conforms to the following EEC directives: 73/23/EEC, as amended by 93/68/EEC 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC Equipment referred to in this declaration of confor
ページ4に含まれる内容の要旨
Product Modification Warning High End Systems products are designed and manufactured to meet the requirements of United States and International safety regulations. Modifications to the product could affect safety and render the product non-compliant to relevant safety standards. Mise En Garde Contre La Modification Du Produit: Les produits High End Systems sont conçus et fabriqués conformément aux exigences des règlements internationaux de sécurité. Toute modification du produit peut entra
ページ5に含まれる内容の要旨
Important Safety Information Instructions pertaining to continued protection against fire, electric shock, and injury to persons are found in Appendix A. Please read all instructions prior to assembling, mounting, and operating this equipment. Important: Informations De Sécurité: Les instructions se rapportant à la protection permanente contre les incendies, l’électrocution, excessif et aux blessures corporelles se trouvent dans l’Annexe A. Veuillez lire toutes les instructions avant d’assem
ページ6に含まれる内容の要旨
are returned for repair. The manufacturer will make the final determination as to whether or not the unit is covered by warranty. Any Product unit or parts returned to High End Systems must be packaged in a suitable manner to ensure the protection of such Product unit or parts, and such package shall be clearly and prominently marked to indicate that the package contains returned Product units or parts and with an RMA number. Accompany all returned Product units or parts with a written expl
ページ7に含まれる内容の要旨
Table of Contents Contacting High End Systems® ............................................................................ ii Product Modification Warning ............................................................................... iv FCC Information ................................................................................................ iv Important Safety Information ............................................................................... v Symbols ..........................
ページ8に含まれる内容の要旨
Connecting the System ..................................................................................... 11 Power Hub Connections ................................................................................. 11 Power Hub to Projector .............................................................................. 12 Power Hub to Orbital Head Connection ......................................................... 12 DMX Data Connection ..........................................................
ページ9に含まれる内容の要旨
Information Menu ............................................................................................ 26 Channels Needed .......................................................................................... 26 Display Errors ............................................................................................... 26 DMX Values Menu .......................................................................................... 26 Fixture Hours ......................................
ページ10に含まれる内容の要旨
x Roadster Orbital Head User Manual
ページ11に含まれる内容の要旨
Chapter 1: Product Overview ® The Roadster Orbital Movement system from High End Systems utilizes a moving mirror ® head mounted on the front of a Christie Digital Roadster S+12/16 3-chip, DLP –based projector to position a projected image anywhere in three-dimensional space. A power hub component mounts separately to allow DMX control of the Orbital Head movement and ® projector shutter, lamp, focus and zoom. It operates with the Catalyst Media Server (a separate product that provides r
ページ12に含まれる内容の要旨
CHAPTER 1 Product Overview Accessories The following table lists accessories available for the Roadster Orbital Movement System from your High End dealer/distributor. For more information, contact your High End Systems dealer/ distributor or see “Contacting High End Systems” on page ii. Part Description Part Number Additional Power Hub for Roadster Orbital Movement System 56040011 Catalyst Interface Box 56040004 Catalyst Outer Mirror 80180006 Catalyst Inner Mirror 80180007 Digital Media Server
ページ13に含まれる内容の要旨
CHAPTER 1 Product Overview Specifications Physical Specifications Mirror Head Dimensions: 349 mm x 369 mm x 686 mm (13.7in x 14.5in x 27in). Weight: 12.7 kg (28 lbs) 348.6 mm (13.7 in) 76.7 mm (3 in) 15.8 mm (.62 in) 369.4 mm (14.5 in) 292.2 mm (11.5 in) 299.7 mm (11.8 in) 97mm 121.4mm (3.8 in) (4.8 in) 285.2 mm 685.8 mm (11.2 in) (27 in) 45° 109 mm (4.3 in) 176mm (6.9 in) 400.6 mm (15.8 in) 116 mm (4.6 in) 386 mm 289.9 mm (15.2 in) (11.4 in) 109.5mm 109.5mm (4.3 in) (4.3 in) 30° 45° 16
ページ14に含まれる内容の要旨
CHAPTER 1 Product Overview Power Hub Dimensions: 276 mm x 301mm x 120mm (10.9in x 11.8in x 4.7in). Weight: 2.3 kg (5 lbs) 13.2 mm (.5 in) 75 mm (3 in) 40 mm 60 mm (1.6 in) (2.4 in) 276.4 mm (10.9 in) 52 mm 150 mm (2.1 in) (5.9 in) 151 mm (5.9 in) 119 mm (4.7 in) 15.5 mm (.6 in) 300.7 mm (11.8 in) Roadcase Dimensions (including casters): 1150 mm x 622 mm x 660 mm (45 in x 24.5 in x 26 in) Weight (with components loaded): 71.7 kg (158 lbs) Projector Lens Options Christie Digital Roadster
ページ15に含まれる内容の要旨
CHAPTER 1 Product Overview Electrical Specifications The following electrical specifications apply to the Power Hub component of the Roadster Orbital Movement System. Warning: Class I equipment – This equipment must be earthed Universal Input from 100 – 230 VAC, (50 – 60 Hz) Rated power: 100 W Fuse: Power supply output fuse: 2.5 A, 250 V slow blow only. Environmental Specifications o Maximum ambient temperature (Ta): 40 C IP Rating: IP 20 Cable and Connector Specifications DMX and Modual Lin
ページ16に含まれる内容の要旨
CHAPTER 1 Product Overview Mirror Head to Power Hub Connection 2 Cable: 4–conductor, 1.5 mm with a maximum length of 2 meters. Connectors: 4-pin male and female XLR connectors: •Pin 1 Ground •Pin 2 Data Complement •Pin 3 Data True •Pin 4 +40V 6 Roadster Orbital Head System User Manual
ページ17に含まれる内容の要旨
Chapter 2: Setup and Configuration Inspecting the Fixture The following components are shipped as the Roadster Orbital Head system: Hardware • Orbital Head fixture •Power Hub • Mounting Bracket for Christie projector Cabling • 4-pin XLR Power hub cable • RS 232 cable • US power cable • European power cable Unpack all components and verify that it is undamaged. Inspect both the outside of the components for physical damage and the optical surfaces of the Orbital Head. If the product is dama
ページ18に含まれる内容の要旨
CHAPTER 2 Setup and Configuration Contact a local authority for the type of power cord cap needed. When installing the power cord cap, note that the cores in the mains lead are colored in accordance with the following code: • green and yellow = earth •blue = neutral • brown = line Warning: Class 1 equipment - This equipment must be earthed. Installing a Line Cord Cap - U.K. Only In the United Kingdom, the colours of the cores in the mains lead of this equipment may not correspond with the co
ページ19に含まれる内容の要旨
CHAPTER 2 Setup and Configuration System Setup Mounting Warnings: Equipment suitable for dry locations only. Do not expose this equipment to rain or moisture. Caution: If mirror surface needs to be cleaned during setup procedure, use only a mild glass cleaner (containing no ammonia) and a soft, lint-free cotton cloth to avoid scratching mirror surface. The Roadster Orbital Head system ships with a mounting bracket adapted to the Christie Roadster S+12 or S+16 high output video projector
ページ20に含まれる内容の要旨
CHAPTER 2 Setup and Configuration 3. Remove the three existing projector M10 x 20mm hex bolts B and lock washers (B). 4. Retract projector foot (C) to C minimum height to accommodate the bracket. 5. Slide the bracket over the projector. 6. Insert the three provided spacers (D) between the bracket and the projector 7. Reinstall the three hex bolts and washers (B) through the spacers. 8. If you are not using the lifter eyes on the projector for truss mounting, Locking washer install the
