ページ1に含まれる内容の要旨
Installer Guide
®®
Follow these instructions to set up the Epson PowerLite
Pro Cinema projector and HQV Video Processor
1. Unpack the projector and video processor. Attach the serial number sticker included with
the video processor to the User Manual for that product.
2. Choose a location for the projector as described in the projector User’s Guide.
3. Connect an HDMI cable from the video processor to the projector.
RS-232 (SLAVE)
HDMI OUT
Video processor
Projector
4. If you want the video pro
ページ2に含まれる内容の要旨
7. After a few moments, the display on the front of the unit should show Output=720P 60Hz. If it does not, press the POWER button on the remote control to place the video processor in Setup Mode. (You see Setup Mode on the display.) Press the Menu button. Then use the u and d buttons to select the output resolution setting (“OUT = xxx”). Use the l and r buttons to change the setting to OUT = 720p 60 Hz. Press the POWER button on the remote control to return the video processor to On Mode.
ページ3に含まれる内容の要旨
11. Focus and zoom the image using the focus and zoom rings. Focus ring Zoom ring Wide Tele 12. Position the image using the lens shift dials. Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position. Horizontal lens shift dial Vertical lens shift dial 13. If the projector is ceiling mounted, you need to invert the image. Press the Menu button on the projector remote control and select Settings > Projection > Fro
ページ4に含まれる内容の要旨
15. Press the HDMI button on the projector remote to select HDMI as the input source. Color Mode Aspect HDMI 16. Press the Color Mode button. Use the u and d buttons to select Natural, then press Select. 17. Press the Aspect button. Use the u and d buttons to select Through, then press Select. 18. Follow the instructions in the video processor User Manual to make any additional adjustments. Note: Because the video processor is ISF-certified, you must connect it to a laptop computer to perfor