ページ1に含まれる内容の要旨
® ®
Epson PowerLite Pro Cinema 800
Home Theater Projector
User’s Guide
ページ2に含まれる内容の要旨
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its
ページ3に含まれる内容の要旨
Contents Introduction 7 Projector Parts 8 Projector Control Panel 9 Remote Control Button Map 10 Optional Accessories 11 Registration and Warranty 11 Using This Manual 12 Setting Up the Projector 13 Choosing a Location 13 Installing the Projector 16 Connecting the Cables 18 Making Other Connections 19 Installing Batteries in the Remote Control 20 Turning On the Projector 21 Turning Off the Projector 22 Selecting the Image Source 22 Positioning the Image 24 Making Basic Adjustments 25 Correcting
ページ4に含まれる内容の要旨
Making Detailed Adjustments 33 Using the Menu System 33 Changing How the Menus Display 34 Adjusting the Picture Quality 35 Input Brightness Settings 35 Sharpness and Picture Quality Settings 37 Color Settings 38 Adjustments Just for Computer Images 40 Selecting Memory Settings and Resetting the Projector 41 Selecting Memory Settings 41 Creating Memory Settings 41 Deleting Saved Memory Settings 42 Resetting the Projector 42 Customizing Projector Features 43 Image Sizing 43 Screen Options 44 Other
ページ5に含まれる内容の要旨
Problem Solving 55 What To Do When the Lights Come On or Flash 55 Solving Picture Problems 56 Solving Remote Control Problems 60 Where To Get Help 61 Specifications 63 General 63 Lamp 63 Remote Control 63 Dimensions 64 Electrical 64 Environmental 64 Safety 64 Compatible Video Formats 65 ESC/VP21 Command Codes 67 Notices 69 Important Safety Information 69 Remote Control Information 70 FCC Compliance Statement 71 Declaration of Conformity 72 Epson America, Inc., Limited Warranty 73 Index 75 Conten
ページ6に含まれる内容の要旨
6 Contents
ページ7に含まれる内容の要旨
Introduction ® ® The Epson PowerLite Pro Cinema 800 projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features: ■ Native 720P (1280 × 720) resolution, 5000:1 dynamic contrast ratio, and up to 1600 lumens for incredibly rich, sharp images in any room lighting ■ Dynamic Eye Iris system that constantly controls the lamp intensity based on the gamma and black/white levels of your proj
ページ8に含まれる内容の要旨
Projector Parts Horizontal lens shift dial Control panel Vertical lens shift dial Zoom ring Focus ring Ventilation slots Adjustable foot Infrared receiver Lens cover Input A port Input B port HDMI port (component) (RGB) D4/SCART port (used mainly in Japan) Trigger out port Infrared receiver Video port ® S-Video port AC power inlet Main power switch Control (RS-232C) port Kensington lock port 8 Introduction
ページ9に含まれる内容の要旨
Mounting bracket connections Lamp cover Air filter Projector Control Panel Source button Menu button Menu navigation Switches the video Displays the buttons input source menus Esc button Exits the current Power menu item light Aspect button Power Changes the picture’s button aspect ratio Warning light Select/Line menu button Keystone correction buttons Selects menu items or Correct the shape of a non-rectangular opens the Line Menu image Introduction 9
ページ10に含まれる内容の要旨
Remote Control Button Map Operation light On and Off Lights when you send buttons remote control commands Memory button Color Mode button Recalls custom picture settings Optimizes viewing for different lighting environments Menu button Aspect button Displays the projector’s menus Changes the picture’s aspect ratio Menu navigation Select/Line menu buttons Selects menu items or opens the Line Menu Source buttons ESC button Switch between equipment Exits the current menu item connected to the pr
ページ11に含まれる内容の要旨
Optional Accessories Epson provides the following optional accessories for the projector: Product Part number Replacement lamp (ELPLP35) V13H010L35 Air filter replacement (ELPAF09) V13H134A09 Kensington security lock ELPSL01 S-video cable ELPSV01 You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for reseller r
ページ12に含まれる内容の要旨
Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information. Please follow these guidelines as you read through the manual: Warnings: Must be followed carefully to avoid bodily injury. Cautions: Must be observed to avoid damage to your equipment. Notes: Contain important information about your projector. Tips: Con
ページ13に含まれる内容の要旨
Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choosing a Location You can install the projector for various viewing setups, as shown below. Center Side Ceiling Setting Up the Projector13
ページ14に含まれる内容の要旨
Ideally, place the projector at a height where its lens is between the top and bottom of the screen. That way, you can keep the projector level and use the vertical lens shift dial to position the image. This produces the best-looking picture. If you place the projector above or below screen level, you’ll have to tilt it up or down to aim the image at the screen; this distorts the shape of the image, but you can correct its shape using the projector’s Keystone function (see page 25).
ページ15に含まれる内容の要旨
The maximum size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may be smaller. Use this table as a rough guide for projector placement: 16:9 aspect ratio 4:3 aspect ratio Projection Maximum diagonal Projection Maximum diagonal distance image size distance image size 2.9 to 4.4 feet 30 in. (26 × 15 in.) 3.5 to 5.3 feet 30 in. (26 × 18 in.) 3.9 to 5.9 feet 40 in. (35 × 20 in.)
ページ16に含まれる内容の要旨
Installing the Projector To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the table on page 15 as a guide to locating the projector. Note the following dimensions: ■ Distance from the center of the lens to the mounting bracket holes: 2.32 inches (59 mm), 0.34 inch (8.6 mm) maximum vertical lens shift ■ Distance from the center of the lens to the center of the projector: 4.33 inches (110 mm), 0.30 inch (7.7
ページ17に含まれる内容の要旨
The included projector mount lets you attach the projector to the wall or ceiling in the location that works best for your room. Follow the instructions included with the mount to install the projector, which weighs 11.5 pounds. The wall or ceiling where you install it must be capable of supporting a weight of 58 pounds. In addition to the tools supplied with the projector mount, you will need a Phillips head screwdriver and a drill to use on the wall or ceiling. If you install the project
ページ18に含まれる内容の要旨
Connecting the Cables You can connect the projector to any type of video equipment, such as a VCR, DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can ® ® also connect it to a desktop or laptop PC or Apple Macintosh system. You can connect up to five pieces of video equipment at the same time, using any of the commercially available cables shown below: Port name Video equipment connection* Computer connection* HDMI Use an HDMI cable: In
ページ19に含まれる内容の要旨
For best results, connect your video equipment to the HDMI (High-Definition Multimedia Interface) port, if possible. If your equipment doesn’t support HDMI, connect it to one of the following ports (highest quality listed first): Input A (for component video), S-Video, or Video (for composite video). Connect video equipment to the Connect a computer to one HDMI port or one of these ports of these ports If you connect to the Input A port, be sure to select the correct Input Signal setting fo
ページ20に含まれる内容の要旨
■ The Trigger out port outputs a 12-volt DC signal when the projector is turned on. This lets a central control system monitor whether the projector is on or off, and can be used to raise or lower your projection screen automatically when the projector is in use. Connect a 3.5-mm mini jack to the port, as shown. Installing Batteries in the Remote Control The remote control uses 2 AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immedi
