ページ1に含まれる内容の要旨
EPSON PowerLite 5350/7250/7350 Projector
Projector Specifications
speaker
control panel
infrared
receiver
General
infrared receiver
status lights
Type of display Poly-silicon Thin Film Transistor (TFT)
speaker
Size of liquid
crystal panels Diagonal: 1.3 inches (33.6 mm)
Lens F=2.0–2.3, f=55–72 mm
Resolution PowerLite 5350: SVGA, 800 × 600 pixels
PowerLite 7250/7350: XGA, 1024 × 768
pixels
Color
reproduction 24 bit, 16.7 million colors
foot adjust
Brightness PowerLite 5350: 1400 lumens (
ページ2に含まれる内容の要旨
EPSON PowerLite 5350/7250/7350 Projector Mouse Compatibility Mode Resolution Frequency Dot (MHz) H(KHz)/V(Hz) Supports PS/2, USB, serial, ADB SVGA56 800 × 600 35.156 / 56.25 36 Remote IR Receiver SVGA60 800 × 600 37.879 / 60.317 40 SVGA72 800 × 600 48.077 / 72.188 50 Supports EPSON remote IR receiver, SVGA75 800 × 600 46.875 / 75 49.5 SVGA85 800 × 600 53.674 / 85.061 56.25 10-foot cable (typical for rear screen projection) XGA43i 1024 × 768 35.522 / 86.958 44.9 XGA60 1024 × 768 48.363 / 60.004
ページ3に含まれる内容の要旨
EPSON PowerLite 5350/7250/7350 Projector When projecting from the ceiling, align the lens as closely as Computer 1 and 2 and Computer Out possible with the top of your screen: Connector Pin Assignments The Computer 1 and 2 and Computer Out connectors are female video RGB, 15-pin micro-D-style connectors. The pin assignments are: Input Computer Out Computer 1 and 2 pin connector signals connector signals 1 Red out / red video Red video 2 Green out / green video Green video 3 Blue out / blue
ページ4に含まれる内容の要旨
EPSON PowerLite 5350/7250/7350 Projector Long Throw Zoom Lens Calculations Projector Status Lights If you are using the optional long throw zoom lens, use the following formulas. The status lights on top of the projector tell you the To determine the minimum and maximum diagonal size of an projector’s operating status. image when you know the projection distance: projection lamp light ❏ Inches: power light Maximum diagonal size = (0.4742 × projection distance) + 3.2489 temperature light Minim
ページ5に含まれる内容の要旨
5 5 4 4 EPSON PowerLite 5350/7250/7350 Projector Open the cover just below the Esc button to access additional Using the Remote Control remote control commands. The remote control uses a line-of-sight infrared signal. To use the remote control, point it towards one of the infrared Power receivers located at the front and back of the projector. You Freeze A/V Mute can use the remote control up to about 32.8 feet (10 meters) R/C ON E-Zoom from the projector. (This distance may be shorter if
ページ6に含まれる内容の要旨
g n i k c a r T S c y n EPSON PowerLite 5350/7250/7350 Projector This table summarizes the functions on the remote control. Using the Control Panel Button Function Power Starts or stops the projector. Power Help Freeze Keeps the current computer or video image on the screen. Computer Video A/Vmute Resize A/V Mute Turns off the audio and video, displaying either the black, blue or user logo background. Esc E-Zoom Enlarges or reduces the image size from 1x to 4x. Menu Pressing the right side
ページ7に含まれる内容の要旨
EPSON PowerLite 5350/7250/7350 Projector Button Function Replacing the Lamp Enter Selects a menu option or the next menu/help screen. Pressing Enter when no menu or help screen is The projection lamp typically lasts for about 1500 to 2000 displayed optimizes the computer image. hours of use. It is time to replace the lamp when: Shift Pressing the shift and Keystone buttons at the same ❏ The projected image gets darker or starts to deteriorate. time increases or decreases the sound volume.
ページ8に含まれる内容の要旨
EPSON PowerLite 5350/7250/7350 Projector 6. Gently insert the new lamp unit by lowering it into position. Make sure it’s inserted securely. Tighten the screws on the new lamp unit. 7. Replace the lamp cover and tighten the cover screws. (Make sure the lamp cover is securely fastened. The projector turns itself off if the lamp cover is open.) Information Reference List Engineering Change Notices None. Technical Information Bulletins None. Product Support Bulletins None. Related Documentation
